Atlona AT-RACK-1RU Handleiding

Atlona Niet gecategoriseerd AT-RACK-1RU

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlona AT-RACK-1RU (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Installation Guide

AT-RACK-1RU

Heavy-Duty Rack Mount Shelf

AT-RACK-1RU

1 x AT-RACK-1RU

16 x 6-mm screws

1 x Installation Guide

Package Contents

The Atlona AT-RACK-1RU is a heavy duty, 1U rack shelf designed for installation of one or two

Gain 120 (AT-GAIN-120) power ampliers in an equipment rack. This rack shelf accessory is also

ideal for side-by-side rack placement of many other Atlona products, including the SW Series

switchers, HDVS-300 systems, Gain 60 (AT-GAIN-60) power amplier, UHD-CAT Series DAs, and

more.

Installation Guide

AT-RACK-1RU

Mounting Instructions

Compatible Half-Rack Products

IMPORTANT: Before attaching a product to the AT-RACK-1RU, remove any

rubber feet that may be attached to the bottom of the unit.

IMPORTANT: Do not over-tighten or use high-torque devices on the screws.

Doing so may damage the screw and/or the mounting holes of the AT-RACK-

1RU and the unit being mounted.

1. Place the Atlona product upside down on a at surface.

2. Turn the AT-RACK-1RU upside down and line up the mounting holes of the AT-RACK-1RU

with the mounting holes of the product.

The illustration below identies the correct holes for mounting half-rack units. A maximum

of two half-rack units can be mounted to the AT-RACK-1RU.

3. Use the included 6-mm screws to secure the product to the AT-RACK-1RU. The example

on the next page, shows proper alignment of the mounting holes on the AT-GAIN-120 with

the AT-RACK-1RU. Up to two Atlona half-rack compatible products can be mounted to the

AT-RACK-1RU.

Front of rack tray

BOTTOM

Installation Guide

AT-RACK-1RU

PWR

VOL LEVEL

AUDIO AMPLIFIER

FWSIG NAL ANALOG IN

NET AUDIODEVICE ID

GAIN

LAN

INPUT

NETWORK AUD IO

RESET RE SET

LINE OUT

CLASS 2 WIRING CLASS 2 WIRING

TRIGG ER MOD E

MODEL:

-22

-2

-4

-20

-19

-14 -9

-22

-2

-4

-20

-19

-14

-9

ANALOG I N

4 / 8 Ω O UT 70V / 100V OUT

AT -GAIN-120

PWR: 100-120VAC 60Hz 120W

220-240V AC 50Hz 120W

L R

4Ω

8Ω 100V

70V

INPUT GAIN

L R

LAN DC 24V

HDBas eT OUT

HDMI OUTHDMI IN

DP IN

USB-C IN

23 4

RELAY RS-232

TRIGGE R I/O

MIRACAST

WiFi AUX

AUDIO

OUT

USB

COM C2

RXP TX

USB

Example: Mounting two units

AT-GAIN-120 and AT-UHD-SW-510W

Example: Mounting two AT-VGW-250 units

Two AT-VGW-250 units can also be mounted in a similar way, using the following holes:

AT-GAIN-120

AT-UHD-SW-510W

Front of rack tray

BOTTOM

Product specificaties

Merk:	Atlona
Categorie:	Niet gecategoriseerd
Model:	AT-RACK-1RU
Kleur van het product:	Zwart
Soort:	Rekschap
Rackcapaciteit:	1U
Code geharmoniseerd systeem (HS):	85389099