Atlona AT-HDR-EX-70C-KIT Handleiding

Atlona AV extender AT-HDR-EX-70C-KIT

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlona AT-HDR-EX-70C-KIT (8 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

AT-HDR-EX-70C-KIT

4K HDR HDMI Over HDBaseT TX/RX Kit

AT-HDR-EX-70C-KIT

The Atlona AT-HDR-EX-70C-KIT is an HDBaseT transmitter/receiver kit for high dynamic range

(HDR) formats. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4

chroma sampling, as well as HDMI data rates up to 18 Gbps. The HDR-EX-70C-KIT provides

transmission of HDMI, as well as bidirectional IR and RS-232 control signals up to 230 feet

(70 meters) for 1080p video, and up to 130 feet (40 meters) for 4K HDR over CAT6a/7 cable.

This extender kit features visually lossless compression with no latency to enable HDR and

4K/60 4:4:4 video signal extension over HDBaseT. For additional integration convenience, the

transmitter remotely powers the receiver through Power over Ethernet (PoE). The HDR-EX-70C-

KIT delivers a cost-eective solution for HDMI and control signal extension, and includes surface

mounting hardware for discrete installation.

IMPORTANT: Visit http://www.atlona.com/product/AT-HDR-EX-70C-KIT for the latest

rmware updates and Installation Guide.

1 x AT-HDR-EX-70C-TX

1 x AT-HDR-EX-70C-RX

4 x Mounting brackets

8 x Mounting screws

1 x 48V DC power supply

1 x IR emitter

1 x 2-pin captive screw connector

2 x 3-pin captive screw connector

1 x 4-pin captive screw connector

1 x 5-pin captive screw connector

1 x Installation Guide

Package Contents

Installation Guide

AT-HDR-EX-70C-KIT

AT-HDR-EX-70C-RX

POWER

LINKFW

RS-232

RX TX SSP

HDBaseT IN HDMI OUTIR OUTIR IN

DC 48V

RS-232

RX T X SS

HDBaseT OUT HDMI INIR OUTIR IN

AT-HDR-EX-70C-TX

POWER

LINKTEST UTILITY

1. LINK

2. FW

3. TEST

4. 5V LOCK

Panel Descriptions

1 TEST

Quick and easy test for cables. Use the

button to start the test and the LED to

determine pass or fail.

2 UTILITY

Connect a mini-USB to USB-A cable from

this port to a computer for updating and

testing. Rotate the dial to set the unit into

dierent modes.

3 POWER and LINK LEDs

The power LED will illuminate green when

receiving power. The link LED will glow

yellow when signal is being sent/received

between the transmitter and the receiver.

4 DC 48V

Connect the included power supply to this

port.

5 RS-232

Bidirectional control port, used for pass

through of commands to or from the

receiver.

6 IR

Connect a 3rd party controller to the IR IN

port or an IR emitter to the IR OUT port.

7 HDBaseT OUT

Connect an HDBaseT cable from this port

to the port on the receiver.HDBaseT IN

8 HDMI IN

Connect an HDMI cable from a source to

this port. e.g. HDR BluRay Player

9 FW

Connect a mini-USB to USB-A type cable

from this port to a computer, to update

the rmware.

10 POWER and LINK LEDs

The power LED will illuminate green when

receiving power. The link LED will glow

yellow when signal is being sent/received

between the transmitter and the receiver.

11 RS-232

Bidirectional control port, used for pass

through of commands to or from the

transmitter.

12 IR

Connect an IR receiver to the IR IN port or

an IR emitter to the IR OUT port.

13 HDBaseT IN

Connect an HDBaseT cable from this

port to the port on the HDBaseT OUT

transmitter.

14 HDMI OUT

Connect an HDMI cable from this port to

an HDMI display.

115 6 7 8 12 14134

103 921

Installation Guide

AT-HDR-EX-70C-KIT

Pin out will be determined by the

RS-232 cable and connect as

RX (receive), TX (transmit) and

(Ground).

A 3-pin captive screw connector for RS-232 has been included.

Two captive screw connectors for IR have been included. A 4-pin connector for the transmitter

and a 3-pin connector for the receiver.

IR IN is connected by a power, ground, and signal

wire. Use a 12V IR receiver with it ( AT-IR-CS-RX e.g.

purchasable through atlona.com).

IR IN is connected by a ground and signal wire. Use

with 3rd party control systems. For easy termination,

Atlona recommends using the 2 meter IR cable AT-LC-

CS-IR-2M (purchasable through atlona.com).

IR OUT is connected by a ground and signal wire.

Use the included IR emitter with this port.

IR OUT is connected by a ground and signal wire.

Use the included IR emitter with this port.

RS-232

IR IN IR OUT

GND SSP

GND RX TXGNDRX TX

IR IN IR OUT

GND SS

The AT-HDR-EX-70C-KIT includes two mounting brackets and four mounting screws each, which

can be used to attach the units to any at surface.

1. Position one of the mounting brackets,

as shown below, aligning the holes on

the side of the enclosure with one set of

holes on the mounting bracket.

2. Use the enclosure screws to secure the

mounting bracket to the enclosure.

3. Repeat the above steps to attach

the second mounting bracket to the

opposite side of the unit.

Mounting Instructions

AT -HDR-EX- 70C-RX

POWER

LINK

Included screws

Installation Guide

Product specificaties

Merk:	Atlona
Categorie:	AV extender
Model:	AT-HDR-EX-70C-KIT
Soort:	AV-zender & ontvanger
Stroom:	0.83 A
USB-connectortype:	Mini-USB B
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	4096 x 2160 Pixels
Audiosysteem:	Multikanaal
Aantal USB-aansluitingen:	1
Certificering:	CE, FCC, cULus, CCC, RCM
HDCP:	Ja
Remote (IR) ingang:	2
Duurzaamheidscertificaten:	RoHS
Kleurdiepte:	12 Bit
Temperatuur bij opslag:	-20 - 60 °C
Audio-uitgangskanalen:	7.1 kanalen
HDBaseT-gecertificeerd:	Ja
Remote (IR) uitgang:	2
HDMI in:	1
RJ-45 uitgang ports:	1
Bandbreedte:	18 Gbit/s
Aantal HDMI-uitgangen:	1
Receiver afmetingen (B x D x H):	109 x 127 x 26 mm
RJ-45 invoer ports:	1
Operating voltage:	48 V
HDBaseT-poort:	Ja
Maximaal bereik:	70 m
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	13 W
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 90 procent
Consumer Electronics Control (CEC)-ondersteuning:	Ja
Receiver gewicht:	392 g
Transmitter afmetingen (WxDxH):	109 x 127 x 26 mm
Transmitter gewicht:	390 g
Ondersteundende kabel types:	Cat5e, Cat6, Cat6a, Cat7