Atlona AT-ETU-SYNC Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Atlona AT-ETU-SYNC (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Installation Guide
1
EDID Emulator for 4K HDR Signals
AT-ETU-SYNC
The Atlona Etudeâ„¢ Sync (AT-ETU-SYNC) provides EDID emulation and Hot Plug Detect com-
munication between HDMI® sink and source devices. It detects and corrects for signal integrity
issues associated with cabling or connections, and can resolve compatibility problems between
a source and destination. The Etude Sync is compatible with high dynamic range (HDR) formats
and is HDCP 2.2 compliant. It supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as
well as HDMI data rates up to 18 Gbps. In addition to addressing HDMI signal and device-related
issues, the Etude Sync reports HDCP compliance at the source and destination, and can manage
EDID communication with the source. This device is ideal for AV system troubleshooting as well
as ensuring reliable, consistent performance.
Package Contents
1 x AT-ETU-SYNC
1 x 5V DC / 1.2A power supply
1 x Mounting brackets (pair)
1 x Installation Guide
IMPORTANT: Visit http://www.atlona.com/product/AT-ETU-SYNC for the latest
rmware updates.
Installation Guide
2
1 PWR
This LED indicator will glow red when the
unit is powered.
2 SOURCE
This LED indicator will glow green if the
source is HDCP compliant.
3 SINK
This LED indicator will glow green if the
sink (display) is HDCP compliant.
4 5V
This LED indicator will glow green if a 5V
signal is received from the source.
5 HPD
This LED indicator will glow green when
the unit receives a Hot-Plug Detect signal
from the sink.
6 TEST
Press this button to run the test
procedure.
7 LEARN
Press this button to program the AT-ETU-
SYNC with an EDID from a sink device.
8 EDID
Turn this dial to select the desired EDID
mode.
9 HDMI IN
Connect an HDMI cable from the source
to this port.
10 HDMI OUT
Connect an HDMI cable from the sink
(display) to this port.
11 FW / PWR
Connect the included power supply to this
port.
Panel Descriptions
1
9 10
2 3
11
4 5 6 7 8
Installation Guide
3
1. Connect an HDMI cable from the source to the port on the AT-ETU-SYNC.HDMI IN
2. Connect an HDMI cable from the sink (display) to the port on the AT-ETU-SYNC. HDMI OUT
3. Connect the included 5V DC power supply to the port on the AT-ETU-SYNC.FW / PWR
4. Connect the 5V DC power supply to an available AC outlet.
The illustration below, shows the proper location of the AT-ETU-SYNC in a basic source-sink
setup. The location of the AT-ETU-SYNC will vary, depending on the system. Before using the
AT-ETU-SYNC as an EDID emulator, an EDID must be selected or programmed.
Installation
Video
Video
AT-ETU-SYNC
HD/UHD Source Display (Sink)
Connection Diagram
IMPORTANT: The AT-ETU-SYNC is an HDR device. For best performance,
use premium HDMI cables that are HDR-certied. The HDMI cable between the
display (sink) and the AT-ETU-SYNC should not exceed 15 feet (4.5 meters).


Product specificaties

Merk: Atlona
Categorie: Niet gecategoriseerd
Model: AT-ETU-SYNC

Heb je hulp nodig?

Als je hulp nodig hebt met Atlona AT-ETU-SYNC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Atlona

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd