ATen VE601 Handleiding

ATen Niet gecategoriseerd VE601

Lees hieronder de 📖 handleiding in het Nederlandse voor ATen VE601 (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

DVI HDBaseT-Lite Extender with POH

VE601

User Manual

www.aten.com

VE601 User Manual

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

CE Warning: This is a class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take adequate

measures.

Suggestion: Shielded twisted pair (STP) cables must be used with the unit to ensure

compliance with FCC & CE standards.

RoHS

This product is RoHS compliant.

SJ/T 11364-2006

The following contains information that relates to China.

VE601 User Manual

iii

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this manual

are subject to change without prior notification by the manufacturer. The

manufacturer makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties as to merchantability or fitness for any particular purpose. Any of

the manufacturer's software described in this manual is sold or licensed as is.

Should the programs prove defective following their purchase, the buyer (and

not the manufacturer, its distributor, or its dealer), assumes the entire cost of all

necessary servicing, repair and any incidental or consequential damages

resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV

interference caused by unauthorized modifications to this device. It is the

responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation

of this system if the correct operational voltage setting was not selected prior

to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS

CORRECT BEFORE USE.

International http://eservice.aten.com

International 886-2-8692-6959

China 86-10-5255-0110

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

United Kingdom 44-8-4481-58923

Product specificaties

Merk:	ATen
Categorie:	Niet gecategoriseerd
Model:	VE601
Kleur van het product:	Zwart
Soort:	AV-zender & ontvanger
Gebruikershandleiding:	Ja
Maximum resolutie:	1920 x 1200 Pixels
HDCP:	Ja
Aansluiting voor netstroomadapter:	Ja
Materiaal:	Metaal
Ondersteunde grafische resoluties:	1920 x 1200 (WUXGA)
Impedantie:	100 Ohm
Temperatuur bij opslag:	-20 - 60 °C
DVI input ports:	1
DVI output ports:	1
Bandbreedte:	340 MHz
Receiver afmetingen (B x D x H):	87 x 103 x 30 mm
Operating voltage:	5 V
Maximaal bereik:	70 m
AC-ingangsfrequentie:	60 Hz
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 80 procent
Receiver gewicht:	250 g
Transmitter afmetingen (WxDxH):	87 x 103 x 30 mm
Transmitter gewicht:	250 g
Stroomverbruik (zender) (max):	1.85 W
Ondersteundende kabel types:	Cat5e, Cat6, Cat6a
Stroomverbruik (ontvanger) (max):	4.23 W