ATen KA7240S Handleiding

ATen Schakelaar KA7240S

Lees hieronder de 📖 handleiding in het Nederlandse voor ATen KA7240S (2 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Package Contents

Hardware Review (Front View)

2-1

2-2 Hardware Review (Front View)

Specifications

Hardware Review (Rear View)

Hardware Installation

1. Remove stacking brackets.

2. Remove the two screws from the side front and the two screws

from the bottom front of the unit.

3. Use the screws provided with the rack mount kit to attach the

mounting brackets to the sides of the unit.

4. Attach unit to rack.

Before you begin, make sure that power to all the devices you will be connecting up has been turned

off. You must unplug the power cords of any computer that has a Keyboard Power On function.

To set up your Console Module, refer to the installation diagram (the numbers in the diagram

correspond to the steps below), and do the following:

Note: For KA7230/KA7230S modules, disregard references to microphone and speaker installation.

1. Ground the unit by connecting one end of the grounding wire to the grounding terminal, and the

other end of the wire to a suitable grounded object

2. Plug your Console devices (USB or PS/2 keyboard, USB or PS/2 mouse, monitor, microphone

and speakers into the switch's Console Ports. Each Port is labeled and marked with an icon to

indicate itself.

3. Use Cat 5e/6 cable to connect the upper KVM Switch Port (port 1) on the

KA7230/KA7230S/KA7240/KA7240S' rear panel to any available Console Port on the KVM

switch's rear panel.

4. (Optional) For a redundant connection to the switch, use Cat 5e/6 cable to connect the lower

KVM Switch Port (port 2) on the KA7230/KA7230S/KA7240/KA7240S' rear panel to any

available Console Port on the KVM switch's rear panel.

5. Use the KVM Cable provided with this package to connect the Local Computer KVM Port to the

local computer.

6. Plug in the power adapter.

Requirements

Console

• A monitor capable of the highest resolution that you will be using on any computer in the installation.

• A PS/2 or USB keyboard

• A PS/2 or USB mouse

Cables

• Cat 5e/6 to connect the KA7230/KA7230S/KA7240/KA7240S to the KVM switch

• For optimal signal integrity and to simplify the layout, a high quality KVM Console Module to Local

Computer cable (with custom SPHD-15 connector) is included with this product. No additional cable

purchase is necessary.

• RS-232 Cable (DB9F to DB9F) to connect the KA7230/KA7230S/KA7240/KA7240S’ RS-232 port to

the local PC.

1. Power LED [Indicates the module is turned on and receiving power]

2. Online LED [Indicates connection to a KVM switch]

3. Local LED [Indicates Local Computer has the KVM focus]

4. Remote LED [Indicates KVM Switch has the KVM focus]

5. Video Gain + Switch [Press to increase the video gain]

6. Video Gain - Switch [Press to decrease the video gain]

7. Local / Remote Switch [Press to toggle the Local Computer/KVM Switch focus]

Note: Local Computer / KVM Switch focus may also be toggled using a keyboard hotkey

combination as follows:

1. Press and hold [Num Lock]

2. Press and release the minus (-) key twice

1. Power LED [Indicates the module is turned on and receiving power]

2. Online LED [Indicates connection to a KVM switch]

3. Local LED [Indicates Local Computer has the KVM focus]

4. Remote LED [Indicates KVM Switch has the KVM focus]

5. Video Gain + Switch [Press to increase the video gain]

6. Video Gain - Switch [Press to decrease the video gain]

7. Local / Remote Switch [Press to toggle the Local Computer/KVM Switch focus]

8. USB Port [Virtual Media device plugs in here]

1. Grounding Terminal

2. KVM Switch Connection Ports

3. RS-232 Port

4. Console PS/2 Mouse and Keyboard Ports

5. Power Jack

6. Local Computer KVM Port

7. Console Monitor Port

8. Console USB Mouse and Keyboard Ports

9. Firmware Recovery Switch

1. Grounding Terminal

2. Local Computer Microphone and Speaker Ports

3. KVM Switch Connection Ports

4. RS-232 Port

5. Console PS/2 Mouse and Keyboard Ports

6. Power Jack

7. Local Computer KVM Port

8. Console Monitor Port

9. Console USB Mouse and Keyboard Ports

10. Firmware Recovery Switch

11. Console Microphone and Speaker Ports

KA7230/KA7230S

KA7240/KA7240S

Function KA7230/KA7230S KA7240/KA7240S

Computer Connections 1

Console Connections 1

Port Selection GUI, Hotkey

Connectors

Console

Ports

Keyboard 1 x USB Type A Female (White), 1 x 6-pin Mini-DIN Female (Purple)

Video 1 x HDB-15 Female (Blue)

Mouse 1 x USB Type A Female (White) , 1 x 6-pin Mini-DIN Female (Green)

Local Computer KVM Port 1 x SPHD-17 Female (Yellow)

USB virtual media 2.0 port 1 x USB Type Female (White) A

KVM Switch Ports 2 x RJ-45 Female

RS-232 1 x DB9 Male (Black)

F/W Upgrade 1 x Slide

Audio

N/A

N/A 2 x Mini stereo jack Female (Green)

2 x Mini stereo jack Female (Pink)

Power 1 x DC Jack

Switches Local/Remote 1 x Pushbutton

Video Gain Adjustment 2 x Pushbutton

LEDs

Power 1 (Blue)

Online 1 (Green)

Local 1 (Orange)

Remote 1 (Orange)

Emulation Keyboard/Mouse PS/2; USB (PC, Sun, Mac)

Video 1280 x 1024 @ 60 Hz

Scan Interval 1-240 sec.

Power Consumption DC 5.3V, 6.5 W DC 5.3V, 10.12 W

Environment

Operating Temp. 0˚ to 50˚ C

Storage Temp. -20˚ to 60˚ C

Humidity 0 - 80% RH, Non-condensing

Physical

Properties

Housing Metal

Weight 1.22 kg 1.26 kg

Dimensions (L x W x H) 22.71 x 17.15 x 5.48 cm (including stacking bracket)

ONL I NE

POW E R LOC A L RE MOTE

1 2 3

765

ONL I NE

POW E R LOC A L RE MOTE

1 2 3

765 8

5 6 9

3 4

6 87 10 11

32 4 5

KA7230 PS/2-USB Console Module (300m max.)

KA7240 Virtual Media PS/2-USB Console Module (300m max.)

KA7230S PS/2-USB Console Module (200m max.)

KA7240S Virtual Media PS/2-USB Console Module (200m max.)

® International Co., Ltd. www.aten.com

Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.

This product is RoHS compliant PAPE-1215-301G Printing Date: 05/2017

This User Guide briefly describes how to install and operate the KA7230/KA7230S/KA7240/KA7240S

Console Module with the Matrix KVM Switch

The complete KA7230/KA7230S/KA7240/KA7240S package consists of:

1 KA7230 or KA7230S or KA7240 or KA7240S Console Module with stacking brackets

1 KVM Cable

1 Power Adapter

1 RS-232 Cable (DB9F to DB9F) (KA7230/KA7240)

1 Mounting Kit

1 User Instructions

If anything is missing or damaged, please contact your dealer immediately.

3. Release [Num Lock]

ATEN Altusen™

All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior

notification by the manufacturer. Please visit our website http://www.aten.com/download/?cid=dds for the most up-to-date versions.

Online Registration

• http://eservice.aten.com

Technical Phone Support

International:

• 886-2-8692-6959

China:

• 86-10-5255-0110

Japan:

• 81-3-5615-5811

Korea:

• 82-2-467-6789

North America:

• 1-888-999-ATEN Ext: 4988

United Kingdom:

• 44-8-4481-58923

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

Warning: Operation of this equipment in a residential environment could cause radio

interference.

Warning: This equipment is compliant with Class A of CISPR 32. In a residential

environment this equipment may cause radio interference.

Suggestion: Shielded twisted pair (STP) cables must be used with the unit to ensure

compliance with FCC & CE standards.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:(1) this device mat not cause harmful interference, and(2) this device must

accept any interference received, including interference that may cause undesired operation.

이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을

주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.

Support and Documentation Notice

All information, documentation, firmware, software utilities, and specifications contained

in this package are subject to change without prior notification bythe manufacturer.

To reduce the environmental impact of our products, ATEN documentation and software

can be found online at http://www.aten.com/download/

Technical Support

www.aten.com/support

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Product specificaties

Merk:	ATen
Categorie:	Schakelaar
Model:	KA7240S
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	1260 g
Breedte:	171.5 mm
Diepte:	227.1 mm
Hoogte:	54.8 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Metaal
Stroombron:	DC
LED-indicatoren:	Ja
Maximum resolutie:	1920 x 1200 Pixels
Meegeleverde kabels:	KVM
Inclusief AC-adapter:	Ja
VGA (D-Sub)poort(en):	2
Aantal Ethernet LAN (RJ-45)-poorten:	2
DC voltage input:	5.3 V
Hoofdtelefoonuitgangen:	2
Aansluiting voor netstroomadapter:	Ja
HD type:	Full HD+
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-20 - 60 °C
Sneltoetsen:	Ja
Upgraden van firmware mogelijk:	Ja
PS/2 poort(en):	2
Seriële poort(en):	1
Aansluiting video:	VGA
Stroomverbruik (typisch):	10.12 W
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 80 procent
Aantal microfooningangen:	2
Aansluiting toetsenbord:	USB, PS/2
Aansluiting muis:	USB, PS/2
Aantal computers:	1
drukknop:	Ja
Console-poorten:	3.5mm headphone, 3.5mm mic, USB A, VGA (D-Sub)
Videobandbreedte:	60 Hz
Maximum kabellengte:	200 m
Aantal USB-poorten console:	2
Seriële poort type:	DE-9 (DB-9)