ATen CS1944DP Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor ATen CS1944DP (56 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56
CS1942DP / CS1944DP
2/4-Port USB 3.0 4K DisplayPort
Dual Display KVMP™ Switch
User Manual
CS1942DP / CS1944DP User Manual
ii
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT: This equipment has been tested and found to comply with the
limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. Any changes or modifications made to
this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
KCC Statement
RoHS
This product is RoHS compliant.
CS1942DP / CS1944DP User Manual
iii
User Information
Online Registration
Be sure to register your product at our online support center:
Telephone Support
For telephone support, call this number:
User Notice
All information, documentation, and specifications contained in this manual
are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of
the manufacturer's software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE.
International http://eservice.aten.com
International 886-2-8692-6959
China 86-400-810-0-810
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
1-949-428-1111


Product specificaties

Merk: ATen
Categorie: Niet gecategoriseerd
Model: CS1944DP
Kleur van het product: Zwart
Ingebouwd display: Nee
Gewicht: 1510 g
Breedte: 156.6 mm
Diepte: 335 mm
Hoogte: 44 mm
Gebruikershandleiding: Ja
Materiaal behuizing: Metaal
Stroombron: DC
LED-indicatoren: Ja
Maximum resolutie: 4096 x 2160 Pixels
Meegeleverde kabels: Audio (3.5mm), DisplayPort, KVM, USB
Inclusief AC-adapter: Ja
Aantal Ethernet LAN (RJ-45)-poorten: 1
Hoofdtelefoonuitgangen: 6
HDCP: Ja
Aansluiting voor netstroomadapter: Ja
HD type: 4K Ultra HD
Duurzaamheidscertificaten: RoHS
Aantal DisplayPorts: 10
Ondersteunt Windows: Windows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP
Temperatuur bij opslag: -20 - 60 °C
Sneltoetsen: Nee
USB-hub: Ja
Upgraden van firmware mogelijk: Ja
Andere ondersteundende systemen: DOS, Novell NetWare 5.x, Novell NetWare 6.x
Aansluiting video: DisplayPort
Stroomverbruik (typisch): 5.76 W
Bedrijfstemperatuur (T-T): 0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 80 procent
Code geharmoniseerd systeem (HS): 85176200
Aantal microfooningangen: 6
Aansluiting toetsenbord: USB
Aansluiting muis: USB
Aantal computers: 4
drukknop: Ja
Console-poorten: 3.5mm headphone, 3.5mm mic, DisplayPort, USB A
Videobandbreedte: 60 Hz
Audio-aansluitingen: Ja
Aantal USB 3.2-hubpoorten type A (3.1 Gen 1): 2
Aantal USB 3.2 Gen 1 (3.1 Gen 1) Type-B poorten: 4
Scaninterval: 1, 99 s
Aantal USB-poorten console: 2

Heb je hulp nodig?

Als je hulp nodig hebt met ATen CS1944DP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd ATen

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd