ATen 2X-010G Handleiding

ATen Niet gecategoriseerd 2X-010G

Lees hieronder de 📖 handleiding in het Nederlandse voor ATen 2X-010G (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

All informaon, documentaon and specicaons contained in this media are subject to change without prior nocaon by the manufacturer.

Please visit our website to nd the most up- -date version. to

Oponal Rack Mount Kits Installaon Guide

Introducon

For LCD KVM Switches/Consoles, ATEN provides a variety of oponal rack mounng opons to provide:

1) Flexibility

A long-railed version of your standard mounng kit lets you t your device to racks with greater depth.

2) Convenience

Easy Installaon Rack Mount Kits are designed to be easy to install and can be installed by one person.

Standard Installaon Rack Mount Kit (Long)

Package Contents

1 Standard Installaon Rack Long Rail Set (2X-010G/2X-023G/2X-040G) x

Compable LCD KVM Units

Refer to the table below for the compable mounng kit and the rack depth for different LCD KVM

Switches/Consoles.

LCD KVM Switch / LCD Console Model

Standard Installaon Rack Mount Kit (Long)

Compable Subtype

Rack Depth (cm)

CL3000N,

CL5708N, CL5716N, CL5708IN, CL5716IN,

CL5800N, CL5808N, CL5816N,

CL6700MW, CL6708MW

Standard Installaon Long (2X-010G) –

70–105

CL1008M, CL1016M,

CL5708M, CL5716M, CL5708IM, CL5716IM,

KL1108VN, KL1116VN,

KL1508AN, KL1516AN, KL1508AiN, KL1516AiN,

KL1508AM, KL1516AM, KL1508AiM, KL1516AiM

Standard Installaon Long (2X-010G) –

68–105

CL1000M

Standard Installaon Long (2X-010G) –

68–100

CL1000N, CL1308N, CL1316N

Standard Installaon Long (2X-023G) –

70–105

CL3108NX, CL3116NX,

CL3884NW

Standard Installaon Long (2X-040G) –

70–105

CL3100, CL3700, CL3800

Standard Installaon Long (2X-040G) –

70–100

Note:

- It takes two people to mount the console.

- The standard rack mounng kit does not include screws or cage nuts. If you need addional screws or cage nuts,

contact your rack dealer.

All informaon, documentaon and specicaons contained in this media are subject to change without prior nocaon by the manufacturer.

Please visit our website to nd the most up- -date version. to

Components -010G and 2X-023G –2X

Hardware Installaon -010G and 2X-023G –2X

Since installaon for 2X-010G and 2X-023G mounng kits and the corresponding LCD KVM switches / LCD consoles

are the same, one combinaon will be used as the example instrucons below.

1. Have one person posion the unit in the rack and hold it steady. Have the second person screw the front

brackets to the rack.

All informaon, documentaon and specicaons contained in this media are subject to change without prior nocaon by the manufacturer.

Please visit our website to nd the most up- -date version. to

2. While the rst person sll holds the unit in place, the second person slides the le and right L-shaped brackets

into the unit’s side mounng brackets from the rear, installing four screws in the tabs to secure them in place.

3. Aer the L-shaped brackets are secured, ghten all the screws.

Allow at least 5.1 cm on each side for proper venlaon, and at least 12.7 cm at the back for the power cord

and cable clearance.

Components -040G –2X

Product specificaties

Merk:	ATen
Categorie:	Niet gecategoriseerd
Model:	2X-010G
Kleur van het product:	Zwart
Gewicht:	729 g
Gewicht verpakking:	945 g
Breedte verpakking:	112 mm
Diepte verpakking:	703 mm
Hoogte verpakking:	82 mm
Soort:	Montageset
Compatibiliteit:	KL3116, KL9108, 9116, KL1508, 1516, KL1100, CL1000, CL1008, CL1016, CL5708, CL5716
Netto gewicht kartonnen doos:	3645 g
(Buitenste) hoofdverpakking hoogte:	137 mm
(Buitenste) hoofdverpakking breedte:	442 mm
(Buitenste) hoofdverpakking brutogewicht:	5780 g
(Buitenste) hoofdverpakking lengte:	727 mm
Hoeveelheid per (buitenste) hoofdverpakking:	5 stuk(s)
Code geharmoniseerd systeem (HS):	85389099
Inbouwdiepte (max):	1050 mm
Inbouwdiepte (min):	680 mm