Ashly FR-16 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Ashly FR-16 (16 pagina's) in de categorie Processor. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
Operating Manual
FR-8 and FR-16 Programmable Fader Control
Overview
The FR-8 and FR-16 are Ethernet-based programmable fader remote controllers for all Ashly
networked products with DSP capabilities. Each fader and it’s push button LED can be programmed
to adjust signal level, select input source, or mute the signal. The FR remotes are ideal for networked
sound systems in meeting rooms, houses of worship, courtrooms, or other applications where simple but
programmable real-time level control is required.
ASHLY AUDIO INC.
847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010
Toll-Free: (800) 828-6308 Fax: (585) 872-0739 www.ashly.com
2014 by Ashly Audio Corporation. All rights reserved worldwide.
All Trademarks referred to herein are the property of their respective owners.
Features
• 8 or 16 Assignable Faders with Master
• Push Button Switches with LED
• Mute/Unmute per Fader
• A/B Source Select per Fader (programmable)
• Two Signal Level Indicators per Fader
• User Defined Signal Level LED Thresholds
• Assignable Fader Scaling
• Front Panel Lockout
• Communication Failure Indicator
• Automatic IP Addressing
• User Defined Label Inserts
•
Wall Box, Rack, or Panel Cut-Out Mounting
Requirements
• Ethernet Network
• Class 1 IEEE 802.3af Power Over Ethernet
• Ashly Networkable Device with DSP
• PC Running
Microsoft® Windows XP or
higher, 32 & 64 bit
• Proteane Software v5.11 or Higher
Compatible Ashly Devices
• ne24.24M
• NE Two-Channel Amplifiers (with DSP)
• NE Multi-Channel Amplifiers (with DSP)
• NE4400, 4800, and 8800 DSP Processors
• Pema Amplifiers
• nXp Amplifiers
2
Front Panel
1) Push Button LED Label Window - Insert
label made from Ashly template doc (page 12)
2) Push Button LED - Used to switch fader
Mute or fader A/B Source Select. LED also
indicates signal level or fader status
3) Channel Fader - Adjusts level of targeted
DSP gain stage or output mixer source
4) Channel Fader Label Window - Insert
label made from Ashly template doc (page 12)
5) Power LED - Shows device is powered
6) Master Fader - Adjusts level of all
assigned channel faders
Rear Panel
1) RJ-45 Jack - Connects to Ethernet
Network with PoE or PoE injector
2) Link LED - Shows network is connected
3) Data LED - Shows Data is transferring
4) Lockout Connector - Use with any switch
to disable all front panel controls when closed
5) Serial Number and MAC Address - Used
for warranty or ash programming
FR Features (FR-8 not shown)
On Startup:
1. When the FR-8 or FR-16 is first connected or powered on, it attempts to communicate with
all devices it has been programmed to control, if any.
2. Once communication with the targeted device is established, it waits to transmit any fader or
switch position data until a control is physically changed by the user. At that point only the data for
that control is sent. This feature prevents sudden and unexpected changes when reconnecting or re-
starting the FR remote control, as well as when a new preset is recalled to the host device.
PLEASE NOTE: When in doubt, make sure all faders are either in the correct position or fully
down before reconnecting
3
Typical Application
Product specificaties
| Merk: | Ashly |
| Categorie: | Processor |
| Model: | FR-16 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ashly FR-16 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Processor Ashly
29 Juli 2024
28 Mei 2024
28 Mei 2024
16 Mei 2024
16 Mei 2024
16 Mei 2024
Handleiding Processor
- Processor HP
- Processor Asus
- Processor Yamaha
- Processor Alpine
- Processor Arturia
- Processor Bose
- Processor Digitus
- Processor Fujitsu
- Processor Helix
- Processor Hikvision
- Processor LD Systems
- Processor Lenovo
- Processor Phoenix Gold
- Processor Pyle
- Processor Roland
- Processor TC Helicon
- Processor Toa
- Processor Zoom
- Processor Black And Decker
- Processor Shure
- Processor Vivolink
- Processor Intel
- Processor SIIG
- Processor AMD
- Processor Matrox
- Processor Rane
- Processor Gefen
- Processor DataVideo
- Processor ART
- Processor Summit Audio
- Processor Bogen
- Processor Allen & Heath
- Processor Rupert Neve Designs
- Processor Chandler
- Processor Fredenstein
- Processor QSC
- Processor Golden Age Project
- Processor Eventide
- Processor Radial Engineering
- Processor Blackmagic Design
- Processor RGBlink
- Processor DBX
- Processor Solid State Logic
- Processor AMX
- Processor Black Lion Audio
- Processor Mathew Lane
- Processor Warm Audio
- Processor SPL
- Processor Lindell Audio
- Processor Drawmer
- Processor Smart-AVI
- Processor AudioThing
- Processor Sonifex
- Processor Manley
- Processor KanexPro
- Processor Dangerous Music
- Processor Christie
- Processor Empirical Labs
- Processor Atlas Sound
- Processor Neutrik
- Processor Lexicon
- Processor CEDAR
- Processor Lectrosonics
- Processor Avenview
- Processor BSS Audio
- Processor BZBGear
- Processor Heritage Audio
- Processor MuxLab
- Processor Audibax
- Processor FabFilter
- Processor Metric Halo
- Processor SEADA
- Processor Datapath
- Processor Henry Engineering
- Processor MyMix
Nieuwste handleidingen voor Processor
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024