ART USB Phono Plus Project Series Handleiding

ART Hifi systeem USB Phono Plus Project Series

Lees hieronder de 📖 handleiding in het Nederlandse voor ART USB Phono Plus Project Series (10 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
USB Phono Plus
Audiophile Computer Interface
Project Series
Users Manual
1
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears, This symbol, wherever it appears, alerts you
alerts you to the presence of uninsulated to important operating and maintenance
dangerous voltage inside the enclosure-voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Please read the manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user manual.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to moisture or use in damp or wet condi-
tions. Do not place container of liquid on unit.
Heat:
Do not locate the unit close to excessive heat or direct sunlight, as this could cause a fire hazard. Locate the
unit away from any equipment, which produces heat such as: power supplies, power amplifiers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke machines.
Handling:
Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To avoid
injury to yourself or damage to the equipment, take care when lifting, moving, or carrying the unit.
Servicing:
Unplug power immediately if equipment is exposed to moisture, the power supply becomes damaged during a
lightning storm or if smoke odor or noise is noted. Refer servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user manual.
2
INTRODUCTION
The is a high quality USB audio interface with a built-in phono USB Phono Plus Project
Project
Project
Project Project Series
Series
Series
SeriesSeries
preamp. It acts as an interface between your computer and a wide variety of analog and digital
sources. The analog inputs are switchable between Phono and Line level signals and a Low Cut filter
removes rumble and wind noise while leaving the audio pristine. The front Gain Trim control and
Signal/Clip LED allow you to optimize the analog to digital converter for a wide range of input
sources. The front panel USB Monitor/headphone jack and the Optical Output on the rear panel can
monitor the audio output from your computer. The USB Monitor/headphone jack can also provide
zero latency monitoring of the input source for easy cueing of records and tapes. The built-in low
noise Phono Preamp circuit is highly accurate and precisely conforms to the RIAA standard. The Line
Out jacks are always connected to the input preamp signal for source monitoring or to allow use as a
stand-alone phono preamp.
Housed in an all aluminum black anodized case, the can be USB Phono Plus
Proje
Proje
Proje
ProjeProject
ct
ct
ct ct Series
Series
Series
SeriesSeries
powered by either an external power source or directly off the USB port, so remote recording is a
snap. An Optical TOSLINK Input and Output as well as an S/PDIF Input let you use the USB Phono
Plus
Proje
Proje
Proje
Proje Project Series
ct Series
ct Series
ct Seriesct Series as a digital audio to USB interface as well.
The is fully compliant with the USB 2.0 specification and uses USB Phono Plus
Pro
Pro
Pro
ProProject
ject
ject
ject ject Ser
Ser
Ser
SerSeries
ies
ies
iesies
USB adaptive mode for playback and USB asynchronous mode for recording. The USB Phono Plus
Proje
Proje
Proje
ProjeProject
ct
ct
ct ct Series
Series
Series
SeriesSeries interface uses the standard “USB Audio CODEC”. This driver is built into most
modern operating systems, including most current versions of Linux. Since some details of how the
audio interface is set vary with different versions of Linux, the setup is beyond the scope of this
document. The main key in setup is to look for “USB Audio CODEC” as the recording source or
playback monitor output while the is connected. No special USB Phono Plus Project
Project
Project
Project Project series
series
series
seriesseries
drivers are needed. We’ve included a CDROM containing the user manual and Audacity recording
software to get you started!
Key Features Include
 USB Connectivity to Desktop and Laptop Computers
 RIAA Accurate Low Noise Phono Preamp
 Up to 45 dB of Clean Gain
 Latency Free Monitoring
 S/PDIF or optical to USB and USB to Optical Interfaces Included
 Preamp Line Out Allows Use as a Stand-alone Phono Preamp
 Includes Audacity Recording Software
 Compact, Stackable all Aluminum Chassis
 Flexible Power from USB Connection, External Power Supply (Optional)
 Three Year Warranty


Product specificaties

Merk: ART
Categorie: Hifi systeem
Model: USB Phono Plus Project Series

Heb je hulp nodig?

Als je hulp nodig hebt met ART USB Phono Plus Project Series stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem ART

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem