ART Phantom I Handleiding

ART Microfoon Phantom I

Lees hieronder de 📖 handleiding in het Nederlandse voor ART Phantom I (1 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
90 Day Warranty
The Facts about Active Direct Boxes:
Direct boxes are the sound engineers’ Swiss Army knife! Here
are some examples:
Problem: You need to connect an amplifier’s speaker output to the mic input
on a mixer.
Solution: Connect a Phantom I between the speaker output and a mic input with
phantom power on the mixer, then set the attenuation switch to –40dB.
Problem: Your PA is humming because there is a ground loop between a signal
source and the mixer.
Solution: Connect a Phantom I between the signal source and a mic input with
phantom power and set the ground switch to Lift.
Problem: You need to connect an unbalanced line-level source (ie: a synthesizer,
another mixer, an effects device, etc.) to a mic input on the mixer.
Solution: Connect a Phantom I between the source and a mic input with phantom
power and set the Attenuator switch to –20dB.
Specifications:
• Attenuator switch provides two levels of signal padding: –20dB and –40dB
• Ground lift capability is switch-based for convenience
• Dual 1/4”, unbalanced inputs are parallel so that one can be used as a thru jack.
• XLR balanced output
• Active LED indicates the presence of phantom power
• Input Level: –10 to +40dB
• Output Level: –10 to +2dB
• Frequency Range: 1Hz – 50kHz
• S/N Ratio: 100dB
• Power: 9 to 48V DC of phantom power
Usage:
a.) Connect the unbalanced output of the source to one of the 1/4” inputs with
either a shielded patch cable or speaker cable depending on the source.
If the signal needs to continue on to another unit, simply use another cable
connected to the parallel 1/4” input.
b.) Set the Attenuator switch if necessary to –20dB if the incoming signal is
line-level or –40dB if it is from the speaker output of an amplifier.
c.) Connect the Phantom I’s XLR output to a phantom-powered mic input to
a mixer or snake with a low-impedance mic cable.
d.) The Active LED will come on to indicate that phantom power is being
received. If it fails to come on, check to see that the mixer’s phantom
power is switched on.
September 2002
Phantom I
Active Direct Box
Phantom Powered
Creative audio solutions in cool little boxes.
ART–ARTcs–09/02
ARTcessories
™
DESIGNED & DISTRIBUTED BY:
APPLIED RESEARCH AND TECHNOLOGY
215 Tremont St. • Rochester, NY 14608 • USA
For Customer Service, please call: 585.436.2720
Email: cserve@artproaudio.com
www.artproaudio.com

Product specificaties

Merk: ART
Categorie: Microfoon
Model: Phantom I

Heb je hulp nodig?

Als je hulp nodig hebt met ART Phantom I stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Microfoon ART

ART

ART M-Three Handleiding

4 Juni 2023
ART

ART M-One Handleiding

11 Mei 2023
ART

ART M-Five Handleiding

8 Mei 2023
ART

ART M-Four Handleiding

3 Mei 2023
ART

ART C2 Handleiding

2 Mei 2023
ART

ART Phantom II Pro Handleiding

1 Mei 2023
ART

ART M-One/USB Handleiding

27 April 2023
ART

ART C1 Handleiding

12 April 2023
ART

ART Phantom I Handleiding

1 April 2023
ART

ART C3 Handleiding

1 Maart 2023

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Audix

Audix ADS48 Handleiding

28 December 2024
Sennheiser

Sennheiser A 9000 Handleiding

20 December 2024
Sony

Sony DWT-P30 Handleiding

18 December 2024
BOYA

BOYA BY-M1000 Pro Handleiding

18 December 2024
PSC

PSC PowerStar RF Handleiding

17 December 2024
PSC

PSC RF Multi SMA Handleiding

17 December 2024
Power Dynamics

Power Dynamics PD210 Handleiding

15 December 2024
Power Dynamics

Power Dynamics PD220 Handleiding

15 December 2024
Behringer

Behringer Go Cam Handleiding

14 December 2024
Behringer

Behringer HM50 Handleiding

14 December 2024