ART HP-1 Handleiding

ART Receiver HP-1

Lees hieronder de πŸ“– handleiding in het Nederlandse voor ART HP-1 (8 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
ARTcessories
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears alerts you to the
presence of uninsulated dangerous voltage inside the
enclosure-voltage that may be sufficient to constitute
a risk of shock.
This symbol, whenever it appears, alerts you to
important operating and maintenance instructions in
the accompanying literature. Please read the manual.
Read Instructions: Retain safety and operating instructions for
future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user
manual.
Environment: Protect from excessive dirt, dust, heat, and
vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke
machines.
Handling: Protect the controls from damage during transit. Use
adequate padding if you need to ship the unit. To avoid injury to
yourself or damage to the equipment, take care when lifting,
moving or carrying the unit.
Servicing: Refer servicing to qualified technical personnel.
Installation: Install the unit in accordance with the instructions
printed in the user manual.
3
CONNECTIONS
1. The input Combo jack, for connections to a monitor mix as
an example. Accepts both XLR and TRS ΒΌ-inch jacks.
2. The Volume knob controls the output level and will power
down the HP-1, when turned fully counterclockwise.
3. The green led will light when the power is on and acts as
a battery indicator. Replace the batteries when red.
4. The Headphone output has a 1/8” stereo jack.
5. The Belt clip attaches to a belt or pant waistline for hands-
free use.
6. The Battery storage area button. Pressing the button and
sliding the shell toward the headphone jack opens the
compartment.
7. The Battery storage section allows the unit to be powered
by a pair of AA batteries. Please observe the correct
polarity when inserting new batteries.
8. The switch should be set to mono when you are using the
HP-1 with a mixer’s aux send or any other mono source
(near battery position) and set to stereo when you are
connected to a headphone output or other stereo sources
(near input connector).


Product specificaties

Merk: ART
Categorie: Receiver
Model: HP-1

Heb je hulp nodig?

Als je hulp nodig hebt met ART HP-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver ART

Handleiding Receiver

Nieuwste handleidingen voor Receiver