Ariston Thermo PK644DGH Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ariston Thermo PK644DGH (9 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
11
GB
HOB
Contents
Installation, 12-14
Positioning
Electrical connection
Gas connection
Burner and nozzle specifications
Description of the appliance, 15
Overall view
Start-up and use, 16
Practical advice on using the burners
Data plate
Precautions and tips, 17
General safety
Disposal
Maintenance and care, 18
Switching the appliance off
Cleaning the appliance
Gas tap maintenance
Troubleshooting, 19
Operating Instructions
GB
Italiano, 1
IT
English, 11
GB
Français, 20
FR
Nederlands, 30
BE ES
Espol, 40
BE
Deutsch, 50
Português, 60
PT GR
ÅëëçíéêÜ, 70
TG 644 P GH(IX)
PKQ 644 D GH (K)
TV 644 P(BK) GH
PK 644 D GH X
B
12
GB
! Before operating your new appliance please read this
for safe use, installation and care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning
! Keep packaging material out of the reach of children. It
can become a choking or suffocation hazard (see
Precautions and tips).
! The appliance must be installed by a qualified professional
according to the instructions provided. Incorrect installation
may cause harm to people and animals or may damage
property.
! This unit may be installed and used only in permanently
The room must be equipped with an air extraction system
that expels any combustion fumes. This may consist of a
hood or an electric fan that automatically starts each time
the appliance is switched on.
The room must also allow proper air circulation, as air is
needed for combustion to occur normally. The flow of air
must not be less than 2 m3/h per kW of installed power.
The air circulation system may
take air directly from the outside
by means of a pipe with an inner
cross section of at least 100 cm2;
the opening must not be
vulnerable to any type of
blockages.
The system can also provide the
air needed for combustion
indirectly, i.e. from adjacent rooms
fitted with air circulation tubes as
described above. However, these
rooms must not be communal
rooms, bedrooms or rooms that
may present a fire hazard.
The installation cavity should have the dimensions
indicated in the figure. Fastening hooks are provided,
allowing you to fasten the hob to tops that are between
20 and 40 mm thick. To ensure the hob is securely
fastened to the top, we recommend you use all the
hooks provided.
555
mm
475
mm
55
mm
Before fastening the cooktop in place, position the seal
(supplied) along the perimeter of the countertop, as
shown in the figure.
Hook fastening diagram
Hooking position Hooking position
for top H=20 mm for top H=30 mm
Installation
Enlarging the ventilation slot
between window and floor.
Adjacent
Room
Room to be
Vented
A
Examples of ventilation holes
for comburant air.
In a chimney stack or branched flue.
(exclusively for cooking appliances)
Directly to
the Outside
instruction booklet carefully. It contains important information
Fitting the appliance
Gas inlet is located at the rear left hand side 25mm in from the rear edge.
ventilated rooms.
The following requirements must be observed:
This appliance must be installed by an authorised person in accordance with this instruction manual, AS/NZS 5601.1 – Gas installations
authority.
(installation and pipe sizing), local gas fitting regulations, local electrical regulations, Building Code of Australia and any other government
13
GB
Front
Hooking positio n Back
for to p mmH=40
! Use the hooks contained in the “accessory pack
Where a athe hob is not installed over built-in oven,
wooden panel must be installed as insulation. Thi s
the lower part of the hob .
Ventilation
To ensure adequate ventilation, the back panel of th e
cabinet must be removed. It is advisable to install th e
oven so that it rests on two strips of wood, or on a
completely at surface with an opening of at least 45 x
560 mm ( ).see sdiagram
! The o thob can nly be ins alled abov e obuilt-in vens wi th a
cooling ventilation system .
Electrical connection
Hobs equipped with a ethree-pole power supply cable ar
designed to operate with alternating current at the voltag e
and frequency indicated on the data plate (this is locate d
on the lower part of the appliance). The earth wire in th e
cable has green and yellow cover. If the appliance is a to
be installed above a obuilt-in electric ven, th e telec rical
connection of the hob and the oven must be carried ou t
separately, both for electrical safety purposes and to
make extracting the oven easier .
Connecting the supply scable to the main
Install a dstandardised plug corresponding to the loa
indicated on the data plate.
The appliance must be directly connected to the mains using
an omnipolar circuit-breaker with a minimum contact opening
of 3 mm installed between the appliance and the mains. Th e
circuit-breaker must be suitable for the charge indicate d
and must comply with current electrical regulations (th e
earthing wire must not be interrupted by the circuit-breaker) .
The supply cable must not come into contact with surface s
with temperatures higher than 50°C .
! The installer must ensure that the correct electrica l
connection has been made and that it is compliant wit h
safety regulations .
Before connecting to the power supply, make sure that:
The happliance is earthed and the plug is compliant wit
the law.
The socket can withstand the maximum power of th e
appliance, which is indicated on the data plate.
The voltage is in the range between the values indicate d
on the data plate.
The socket is compatible with the plug of the appliance. If
the socket is incompatible with the plug, ask an
authorised technician to replace it. Do not use extension
co or mrds ultiple sockets.
! Oncethe appliance has been installed, the power supply
cabl nde a the electrical cket .so must be easily accessible
! .The cable must not be bent or compressed
! Thecable must be checked regularly and replaced by
aut orisedh technicians only ( see Assistance ).
! The manufacturer declines any liability should these safety
Gas connection
! tCheck that the pressure of the gas supply is consisten
with the values indicated in Table 1 e(Burner and nozzl
speci atic ons). Th is will ensure the safe operation and
longevity of your appliance while maintaining ecient
energy consumption .
Connection with rigid pipe (copper or steel a )
! inConnection to the gas system must be carried out
such a eway as not to place any strain of any kind on th
appliance.
There is an adjustable eL-shaped pipe tting on th
appliance supply ramp and this is tted with a inseal
order to prevent leaks. The seal must always be replace d
after rotating the pipe tting (seal provided wit h
appliance). The gas supply pipe tting is a 2threaded 1/
gas cylindrical male attachment .
560 mm.
45 mm.
must be placed at a mminimum distance of 40 mm fro
measures not be observed.
T t his appliance is sui able for connec ion wi rigid pipet th or lexible hose f .
T t the isola ing manual shu -off valve connec ion poin mus be accessi t t t ble he w n
appliance is ins alled Na ural as he t . t G : t supplied regula or mus be ed t t fitt to
t t .he appliance inle connect ion


Product specificaties

Merk: Ariston Thermo
Categorie: Fornuis
Model: PK644DGH

Heb je hulp nodig?

Als je hulp nodig hebt met Ariston Thermo PK644DGH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fornuis Ariston Thermo

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis