Argon 6355FS Handleiding

Argon Speaker 6355FS

Lees hieronder de 📖 handleiding in het Nederlandse voor Argon 6355FS (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 113 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
w w w . a r g o n a u d i o . c o m 1
Quick start
63xx series Quick start Guide
(Argon Audio 6340, 6350, 6344C, 6344FS and 6355FS)
We care about the Environment
By refraining from inserting a full printed manual with our
Argon Audio products we save more than 20 tons of paper
each year. You can find full product information for this
product on; www.argonaudio.com
S peaker positioning
The Speakers are best used with the tweeters
approximately at ear level when seated. Variations in
placement of your Speakers can produce dramatic
differences in the way music sounds. No listening rooms are
the same and therefore we encourage you to spend some
time experimenting with which placements work best in your
listening room. Trust your ears and be willing to experiment
freely. You can start with our basic recommendations.
Please try to ensure that the rooms surroundings of each
S peaker left and right are similar in acoustic character.
For example, if one Speaker is placed on bare walls while
the other is placed close to soft and curtains, furniture’s
both the overall sound quality and the stereo image are
likely to be compromised. Because bookshelves are usually
located close to the wall, placement on bookshelves will
often provide a richer, more bodied sound. In other full-
words; you will get more Bass. e other hand, if you On th
place the Speakers free You will get less Bass but -standing
a clearer sound. kers should be To begin with, the Spea
positioned between 1.5m and 3m apart at two corners of an
equilateral triangle completed by the listening area at the
third corner. See fig. 1
Home Theatre Systems
Argon Audio 63xx series speakers can be used as front
channels in a surround sound home theatre system.
Positioning the front Speakers within approximately 1metre
of the sides of your TV will create the best sound image in
scale with the visual image. The Speakers’ height should
ideally be between the centre and top of the screen. If the
Speakers are to be used for reproducing the surround
channels in a multi channel home theatre system, we
suggest you place them as illustrated in Figures 2 to 4
depending on the number of channels.
Connecting your loudspeakers
We recommend that you read the manual of your amplifier
or peakers. -AV receiver carefully before connecting your S
Please switch off all equipment when connecting your
S . peakers The binding posts on the terminal accepts wire
up to Ø 4mm or cables with banana plugs. that Make sure
positive peaker terminal binding posts on the S (marked +
and colored red) are connected to the positive output
terminal binding posts on the amplifier and that the negative
terminals on the Speaker (marked black) are – and colored
connected to the negative output terminal on the amplifier.
See fig 5.
You are now ready to enjoy your Argon Audio Speakers…!
Running-in period
We recommend a running-in time of your Argon Audio
S - peakers of approximately 15 20 hours at normal listening
level before you decide on the final positioning of the
S -peakers. During the running in time the drive units will
settle in and perform as intended.
w w w . a r g o n a u d i o . c o m 2
Quick start


Product specificaties

Merk: Argon
Categorie: Speaker
Model: 6355FS

Heb je hulp nodig?

Als je hulp nodig hebt met Argon 6355FS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Argon

Handleiding Speaker

Nieuwste handleidingen voor Speaker