Argoclima Speedy Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Argoclima Speedy (4 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
5
V 021/14
OPERATING INSTRUCTIONS
Read the instructions carefully before operating the appliance or carrying out maintenance operations.
Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.
Keep these instructions in a safe place for future reference.

HIGH-VELOCITY FLOOR FAN
EN
6
V 021/14
GENERAL SAFETY INFORMATION
ï‚· Use this fan only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric
shock or injury to people.
 Ensure that the mains power complies with the voltage specified on the fan ’s data plate (220-240V~/50Hz).
ï‚· This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.
ï‚· This appliance is not suitable for use by people (including children) with reduced physical, sensory or mental abilities, or
without the necessary experience and knowledge, unless they have been adequately supervised and instructed
concerning use of the appliance by a person responsible for their safety.
ï‚· Do not cover the appliance or restrict the air inlet and outlet grilles.
ï‚· Ensure that all objects are at least 1 meter from the front and sides of the appliance.
ï‚· Disconnect the mains power when the appliance is not used or for cleaning operations.
ï‚· Avoid using the fan in dusty environments or in the presence of inflammable vapours (e.g. in workshops or garages) or
paint vapours.
ï‚· Do not place anything on the appliance, use the appliance to dry clothing.
ï‚· Use the appliance in a well-ventilated area.
ï‚· Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may
damage the appliance.
ï‚· To avoid the risk of fire, do not block the grilles or tamper with them in any way while the fan operates.
ï‚· Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced
by the manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.
ï‚· Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact qualified technical
personnel to examine the appliance or perform any electrical or mechanical repairs.
ï‚· The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the
appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.
ï‚· Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth
rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.
ï‚· To disconnect the fan, push the switch to OFF and remove the plug from the socket. Pull on the plug only. Avoid pulling
on the cord when disconnecting the fan.
ï‚· Do not place any objects on the cord and do not bend it.
ï‚· It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension
cord to operate multiple appliances.
ï‚· Do not immerse the cord, plug or any other element of the appliance in water or other liquids.
ï‚· Do not touch the plug with wet hands.
ï‚· Do not place the fan above or near another heat source.
WARNING: AVOID COVERING THE FAN TO PREVENT IT FROM OVERHEATING.
ï‚· The fan may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable material
including curtains, drapery, blankets, etc. KEEP THE FAN AWAY FROM THESE MATERIALS.
ï‚· Do not connect the appliance to the mains power before it has been properly assembled and positioned.
ï‚· Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far
away from busy areas or where it cannot be accidentally pulled-out.
ï‚· Do not operate the fan in close proximity to bathtubs, showers, washbasins or pools.
ï‚· Do not position the fan below a socket outlet. Do not operate the appliance outdoors.
WARNING: do not use the fan with a controller or any other external device that activates the appliance
automatically, as there may be a risk of fire if the fan is covered or incorrectly positioned.
WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF
DISCONNECTING POWER. WHEN SERVICING OR MOVING THE FAN, ALWAYS UNPLUG THE
POWER CORD.
ï‚· A fan has hot and arcing or sparkling parts inside. It must not be used in potentially dangerous locations such as
flammable, explosive, chemical-laden or wet atmosphere.
ï‚· Do not place the fan on soft surfaces, like a bed, where openings may become blocked. Always place the
fan on a stable, flat, level surf the ace when operating, to avoid the chance of thefan overturning. Locate the power cord so
fan or other objects are not resting on it.
ï‚· Always unplug the fan when not in use.
ï‚· In order to avoid accidents turn unit off if unattended.
ï‚· In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not
attempt to repair it and take it to your local after sales service.
7
V 021/14
DESCRIPTION OF PARTS
FRONT VIEW
1. Anti-slip feet
2. 4 side hooks for fixing the grid
3. Top hook for fixing the grid
4. Bottom screw for fixing the grid
REAR VIEW
5. ON/OFF button and speed selection buttons
SIDE VIEW
6. Handle (Tilt adjustment)
HOW TO USE THE APPLIANCE
The appliance does not need to be installed.
Place the unit on a flat, stable surface.
Do not use this fan in an area with high humidity, rich of dust or water.
Connect the power cord to a suitable power socket (220V-240V~/50Hz).
When you move the appliance, use the handle on the back.
Buttons ON/OFF and speed selection (5):
ï‚· 0 - off
ï‚· 1 - low speed
ï‚· 2 - medium speed
ï‚· 3 - high speed
TILT ADJUSTMENT: use the handle to adjust the tilt.
WARNING: DO NOT PUT FINGERS INTO THE GRID.
ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE.
IMPORTANT: DO NOT SUBMERGE THE FAN IN WATER.
Cleaning the outside surface of the appliance
Turn the switch off and unplug before carrying out any maintenance work or moving the appliance.
Use a soft cloth to remove any dust from the fan.
If the fan is excessively dirty, use a soft cloth moistened with water and a mild detergent at a temperature lower than 50°C.
Let the fan dry completely before use.
MAINTENANCE AND STORAGE
3
5
6
2
4
1


Product specificaties

Merk: Argoclima
Categorie: Ventilator
Model: Speedy
Kleur van het product: Roestvrijstaal
Gewicht: 5000 g
Breedte: 500 mm
Diepte: 190 mm
Hoogte: 500 mm
Soort: Huishoudelijke ventilator met bladen
Aantal snelheden: 3
Plaatsing: Vloer
In hoogte verstelbaar: Nee
Type stroombron: AC
Luchtstroom: 96.97 m³/uur
Handvat(en): Ja
AC-ingangsspanning: 230 V
AC-ingangsfrequentie: 50 Hz
Stroomverbruik (typisch): 100 W
Auto oscillatie: Nee
Aantal ventilatorbladen: 3

Heb je hulp nodig?

Als je hulp nodig hebt met Argoclima Speedy stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Ventilator Argoclima

Handleiding Ventilator

Nieuwste handleidingen voor Ventilator