Arecont Vision MegaDome AV3255 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Arecont Vision MegaDome AV3255 (20 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
Arecont Vision MegaDome® 2 Installation Manual
0 | P a g e
Arecont Vision MegaDome® 2 Installation Manual
1 | P a g e
MegaDome® 2 Installation Manual
Inside the box:
A. Arecont Vision MegaDome® 2 camera
B. Mounting template
C. Rubber gasket (preinstall on bottom of
camera)
D. AC & DC p ower cable
E. I/O cable
F. m Installation anual
G. CD with AV100 oftware and s user
manuals (License Key Required for
Recording)
H. Pack of four (4) wood screws and four (4)
dry wall anchors
I. -K Security L ey
J. -One double sided hex key
K. -One single sided hex key
Not included but needed:
• #1 Phillips head screwdriver
• #2 Phillips head screwdriver
Image 1
Mounting the Camera:
1. Remove the camera and hardware from the
box.
2. Using the mounting template, prepare the
mounting surface for camera installation.
NOTE: the 19.5mm diameter hole on the
Mounting template is where the Ethernet
cable will be exiting the MegaDome®, align
accordingly. If using the side conduit hole,
please see step 4 . following
3. Using Security L key, loosen the four (4) -
screws securing the dome cover (Image 2).
Remove the vandal resistant dome cover.
NOTE: Do not remove the screws from the
dome cover.
2 Image
G
F
E
C
A
D
B
H
I
J
K
Arecont Vision MegaDome® 2 Installation Manual
2 | P a g e
4. If you are using the side conduit opening,
remove the conduit plug by first removing the
socket set screw using the provided double-
sided hex . key (Image 3)
Image 3
Note: Make sure that you install the rubber
gasket on the bottom of the camera to form a
weather tight seal with the mount surface.
5. Run the Ethernet cable through the gasket
and hole the on the bottom of the camera
( 4)Image or run cable through the side the
conduit and plug it into the RJ45 port. NOTE:
If the camera will be powered via PoE, please
skip to step 6.
6. If the camera will be powered by an AC or DC
power supply, run the supplied power cable
through the gasket and on the bottom the hole
of the camera or run the cable through the
side conduit and connect it to its respective
connector inside the camera (Image 3).
NOTE: Make sure that your installation of
wires complies with Electrical Code of the
local government where the camera is
installed and no bare wirethat s are exposed.
Image 4
7. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood screws or any optional
hardware suitable for the mounting surface.
8 . Apply silicon on the bottom of the camera to
form a weather tight seal with the mount
surface (if necessary).
HOLE
POWER
RJ- 45


Product specificaties

Merk: Arecont Vision
Categorie: Bewakingscamera
Model: MegaDome AV3255

Heb je hulp nodig?

Als je hulp nodig hebt met Arecont Vision MegaDome AV3255 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Arecont Vision

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera