Arecont Vision MegaDome AV2155DN Handleiding

Arecont Vision Bewakingscamera MegaDome AV2155DN

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Arecont Vision MegaDome AV2155DN (17 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
Arecont Vision MegaDomeTM Installation Manual
0 | P a g e
Arecont Vision MegaDomeTM Installation Manual
1 | P a g e
MegaDomeā„¢ Installation Manual
A. Arecont Vision MegaDomeTM
Inside the box:
B. Mounting template
C. Magnetic core
D. Pack of four (4) wood screws and four (4)
dry wall anchors
E. One double sided hex key
F. One single sided hex key
G. Security L- key
H. Power cable
ā€¢ #1 Phillips head screw driver
Not included but needed:
ā€¢ #2 Phillips head screw driver
Image 1
Mounting the Camera:
1. Remove camera and hardware from the
box.
2. Using the Mounting template, prepare the
mounting provisions for camera
installation. NOTE: the 19.5mm diameter
hole on the Mounting template is where
the Ethernet cable will be exiting the
MegaDomeTM, align accordingly. If using
the side conduit hole, please see step 9
below.
3. Using Security L key, loosen the four (4) -
screws securing the dome cover (Image
2). Remove vandal resistant dome
cover. NOTE: Do not remove screws
from the dome cover.
2 Image
H G F E C
A D B
Arecont Vision MegaDomeTM Installation Manual
2 | P a g e
4. Run Ethernet cable through hole the on the
bottom of the camera (Image 3) and plug it
into the RJ45 port. NOTE: If the camera will
be powered via PoE, please skip to step 6.
5. If the camera is powered by an outside power
supply, run the supplied power cable through
the hole and connect it to its respective
connector inside the camera (Image 3).
NOTE: Make sure that your installation of
wires complies with Electrical Code of the
local government where the camera is
installed and no bare wires are exposed.
6. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood optional screws or any
hardware suitable for the mounting surface.
7. Install the included magnetic core onto the
Ethernet cable as shown in Image 4. NOTE:
Ensure both tabs are tightly secured.
Image 3
Image 4
HOLE
POWER
RJ- 45


Product specificaties

Merk: Arecont Vision
Categorie: Bewakingscamera
Model: MegaDome AV2155DN

Heb je hulp nodig?

Als je hulp nodig hebt met Arecont Vision MegaDome AV2155DN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Arecont Vision

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera