Aquatica Water Wizard Handleiding

Aquatica Verlichting Water Wizard

Lees hieronder de 📖 handleiding in het Nederlandse voor Aquatica Water Wizard (5 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
WATER WIZARD
Technical Lighting Control
WATERPROOF
HOUSING FOR
®
Pocket Wizard Plus III
USER MANUAL
3025 De Baene, Montreal, Quebec, Canada, H4S 1K8
info@aquatica.ca www.aquatica.ca
Tel.: -737-9481514
Foreword
Technical Lighting Control would like to thank you for acquiring the Water Wizard housing for your Pocket Wizard Plus III
transceiver. Technical Lighting Control is part of a group, along with Aquatica and Amphibico, of afliated companies that
dedicates themselves in the underwater imaging enthusiast the best instrument for their passion. The products are
developed by and for demanding professional in this eld.
With regular maintenance, your Water Wizard housing will gives you years of faithful service, before using it, we
recommend that you make yourself familiar with the Pocket Wizard® Plus III transceiver and take a moment to read this
owner manual.
Instruction:
First unscrew the four hexagonal screws that close’s the front cover, remove this cover and place somewhere clean and
safe.
Plug in the mini phone jack into the transceiver; position it so that the dowel pin ts properly in the mounting hole in the
back of the transceiver.
Inspect and clean and lubricate the O-ring and close back the cover, tighten down the screws, making sure not to over
torque them.
Remove the bulkhead cap, inspect for cleanliness, lubricate the sync cord and/or extension cord O-ring and install in the
Water Wizard bulkhead connector, connect the end of the sync cord to the camera housing or the underwater strobe(s).
Most common sync cords used are:
Ikelite to Nikonos single sync cord # 4104.31: For connecting the Water Wizard housing to most housing equipped with a
Nikonos type of strobe connector
Ikelite to Ikelite single cord # 4103.51: For connecting the Water Wizard housing to one Ikelite strobe or to any housing
equipped with an Ikelite bulkhead.
Ikelite to Ikelite double cord # 4103.52: For connecting the Water Wizard housing to two Ikelite strobes.
Ikelite to Sea & Sea single cord # 4118.1: For connecting the Water Wizard housing to one Sea & Sea or Inon strobe.
Ikelite to Sea & Sea double cord # 4118.2: For connecting the Water Wizard housing to two Sea & Sea or Inon strobes.
Additional extensions are also available:
Ikelite 4.5m/15ft extension cord # 4102.15 Ikelite 0.9/3ft extension cord # 4102.03
Check for additional sync cords combination. www.ikelite.com
1
2
3
3
3
3
5
7
7
64
1) ON/OFF BUTTON
2) TEST / TRIGGER BUTTON
3) CLOSING FASTENER (4x)
4) HEXAGONAL KEY
5) CONNECTING BULKHEAD
6) BULKHEAD CAP
7) 1/4-20" THREADED MOUNTING HOLE

Product specificaties

Merk: Aquatica
Categorie: Verlichting
Model: Water Wizard

Heb je hulp nodig?

Als je hulp nodig hebt met Aquatica Water Wizard stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Aquatica

Aquatica

Aquatica Water Wizard Handleiding

8 Juli 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Nitecore

Nitecore HA15 UHE Handleiding

30 December 2025
Nitecore

Nitecore NPL25 GL Handleiding

30 December 2025
Genaray

Genaray Bright Beast TIR-1X1B Handleiding

27 December 2024
Genaray

Genaray Quad Sun QS-1X4 Handleiding

27 December 2024
Aputure

Aputure STORM 1200x Handleiding

24 December 2024
Kogan

Kogan KAABLGTBARD Handleiding

23 December 2024
Kogan

Kogan KASMCRTNLTA Handleiding

23 December 2024
LumenRadio

LumenRadio CRMX Galileo MAX Handleiding

21 December 2024
Showtec

Showtec Performer Fresnel 2200 DDT Handleiding

21 December 2024
Showtec

Showtec AirDrive 2.4 IP Handleiding

21 December 2024