Apogee AMT-12 Handleiding

Apogee Speaker AMT-12

Lees hieronder de 📖 handleiding in het Nederlandse voor Apogee AMT-12 (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
© 2008 Bogen Communications, Inc.
Specifications subject to change without notice.
54-2183-01E 1010
AMT-12
AMT-15
Professional
Loudspeakers
Installation
and Use Manual
Table of Contents
Introduction 2
Speaker Mounting 2
Powering the Loudspeaker 3
Input Panel 3
Daisy-Chaining Speakers 4
Speaker Block Diagram 4
Connector Wiring Diagram 4
Specifications 5
Limited Warranty 6
Notice
Every effort was made to ensure that the information in this guide was complete and accurate at the time of
printing. However, information is subject to change.
Introduction
The AMT- 21is designed to deliver high-output
music and sound reinforcement in a lightweight
package. The 12-inch woofer has high sensitivity
to maximize amplifier output. The .77-inch1
compression driver diaphragm, comprised of an
titanium-alloy for added strength and rigidity,
effortlessly handles the high input levels to match the
woofer. A carefully designed cross-over network
accurately filters each driver for proper matching of
phase and summation in the cross-over region.
The transition is much smoother than other loud-
speakers in this class, making the sound more
accurate and more realistic.
The AMT- 51combines the same high-output
compression driver used in the AMT- 2 with a1
robust 15-inch woofer. The sound quality is
enhanced further by a richer, dynamic bass response
which extends a full 0 Hz lower. The AMT- 5 can fill1 1
larger rooms with more power than competitive
models, and with much more accurate sound.
Single Speaker
The Apogee AMT loudspeakers may be deployed individually by several methods. First, the loudspeakers may be
stacked directly on one another using the built-in feet on each speaker.
Both the AMT- 2 and AMT- 5 may be mounted on stands using the integrated 35mm ( -3/8") stand mount on the1 1 1
bottom of the enclosure. Because of the light weight of the AMT loudspeakers, plus the convenient integral handle,
one person can set up multiple speakers on stands easily and quickly.
IMPORTANT: The integrated pole cup is provided for vertical speaker orientation only.
DO NOT use this mount for applications requiring off-plumb orientations.
The loudspeakers may also be suspended by attaching forged eye-bolts to the rigging points of the speakers
(Rigging point: depth 5mm, diameter M8, thread pitch .25mm). There are two rigging points located on the 1 1 speak-
ers’ top and two on the bottom. Plastic screw caps protect the rigging points. The enclosures can be
suspended from these points with stainless steel wire rope or an equivalent approved by a qualified engineer
and/or your local code enforcement office.
Note: The rigging points are only for suspending the speaker itself. Do not suspend other speakers
or equipment from the speaker’s rigging points.
Multiple Speakers
The Apogee AMT loudspeakers have a coverage angle of 65 degrees horizontally by 65 degrees vertically. Should
this not be sufficient to properly cover the listening area, or if the acoustic output of a single speaker is not great
enough, multiple AMT loudspeakers may be arrayed to provide greater coverage or higher on-axis SPL. The pre-
ferred method of arraying two loudspeakers is with the Apogee Adjustable Rigging Beam Assembly (Part No. 09-1
2 40). The rigging beams allow for user adjustment of the splay angle between the cabinets from 0 degrees “Tight1
Pack” to 30 degrees of splay.
In a Tight Pack Array, the total coverage of the array will be slightly greater than that of a single speaker. Because of
the overlap in coverage between the speakers in the Tight Pack configuration, the on-axis SPL will increase 3dB.
As the splay angle increases, the on-axis SPL will slowly decrease back to that of a single speaker and the coverage
angle will widen to a maximum of 20 degrees horizontal.1
Speaker Mounting
AMT- 51
AMT- 21
2

Product specificaties

Merk: Apogee
Categorie: Speaker
Model: AMT-12

Heb je hulp nodig?

Als je hulp nodig hebt met Apogee AMT-12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Apogee

Apogee

Apogee AMT-15 Handleiding

28 Februari 2025
Apogee

Apogee AMT-12 Handleiding

28 Februari 2025

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Bogen

Bogen MB8TSL(VR) Handleiding

28 Februari 2025
NEAR

NEAR LB4TM Handleiding

28 Februari 2025
Bogen

Bogen FG20W Handleiding

28 Februari 2025
NEAR

NEAR IG4M Handleiding

28 Februari 2025
Bogen

Bogen FG20B Handleiding

28 Februari 2025
Audac

Audac VEXO106 Handleiding

28 Februari 2025
Bogen

Bogen CSD2X2U-V2 Handleiding

28 Februari 2025
Bogen

Bogen AMBSL1 Handleiding

28 Februari 2025
Bogen

Bogen AMBSQ1 Handleiding

28 Februari 2025
Bogen

Bogen ASWB1 Handleiding

28 Februari 2025