API Audio Tranzformer LX Handleiding

API Audio Gitaarversterker Tranzformer LX

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor API Audio Tranzformer LX (2 pagina's) in de categorie Gitaarversterker. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
LX
BASS PEDAL USER GUIDE
The API TranZformerยฎ
LX
provides unsurpassed sonic sculpting by combining a legendary API 525
โ€œfeedbackโ€ type compressor circuit with an inductor-based tone contro inspired by the vintage API 55l 3
program equalizer in a versatile and robust bass pedal/direct box with balanced and unbalanced outputs.
Features include independent tone and compression in/out footswitches, phase inverters on each output,
ground lift, clip indicator, transformer output, true hardwire bypass, and of course the classic API sound.
SIGNAL FLOW (from right to left) : Input > GAIN > COMP > TONE > Transformer Output
AUDIO CONTROLS
1. GAIN: Input level; +9dB to +30dB; More gain creates more compression
2. COMP (compression): Determines amount of compression (gain-reduction); Higher
numbers provide more compression (lower threshold)
3. CLIP LED: Illuminates to indicate Input Gain or Output stage (pre Level) clipping
4. TONE (equalizer): 3-band +/- dB EQ (see graph on page 2) 15
๏ƒ˜ 100Hz peaking EQ; low-end ( bass, bottom, depthโ€ฆ)
๏ƒ˜ 400Hz peaking EQ; mid-range (body, warmth, powerโ€ฆ)
๏ƒ˜ 2kHz peaking EQ; high-end (presence, attack, articulationโ€ฆ)
5. Output LEVEL: -inf. to 0dB attenuator; 0db (no cut) is fully clockwise
๏ƒ˜ Sets level for ยผโ€ unbalanced output only (balanced output level is fixed)
FOOTSWITCHES
A. COMP (compressor): Engage/disengage compressor; lit LED when engaged
B. TONE (equalizer) Engage/disengage equalizer; lit LED when engaged :
C. BYPASS: Hardwired unbalanced bypass; lit LED when BYPASSED
INPUTS & OUTPUTS
SETUP
๏ƒ˜ Plug cable from instrument output into TranZformer INSTRUMENT INPUT. LX
๏ƒ˜ Connect UNBALANCED OUT to an amplifier input or the next pedal in your chain.
๏ƒ˜ The BALANCED OUT can be connected to a balanced line-level input for recording or live.
USE Starting settings: Disengage BYPASS, engage TONE & COMP footswitches, set all three TONE
controls to 0 dB boost/cut (12 oโ€™clock), and LEVEL fully clockwise (0dB).
๏ƒ˜ Adjust GAIN to set input level to the compressor; Higher GAIN creates more compression at a
given COMP setting; Reduce GAIN to avoid clipping if needed.
๏ƒ˜ Set COMP as desired for increased sustain, perceived loudness, and punchiness; higher COMP
numbers provide increased gain reduction and greater compression.
๏ƒ˜ SET the three TONE controls to achieve the desired tone. Each band has +/- 15dB of boost & cut
(reduce boost if clipping is indicated).
๏ƒ˜ Adjust the LEVEL control to set the level of the ยผโ€ UNBALANCED OUTPUT (Does not reduce .
clipping of internal signal.) The level of the BALANCED OUTPUT is fixed.
๏ƒ˜ Engage the PHASE inverters and the GROUND LIFT as needed.
CONNECTIONS
1. INSTRUMENT INPUT :
๏ƒ˜ยผโ€ hi-Z, unbalanced
2. UNBALANCED OUTPUT (to amp):
๏ƒ˜ยผโ€ hi-Z
๏ƒ˜Fed directly from INPUT in BYPASS
3. BALANCED OUTPUT :
๏ƒ˜3-pin XLR male, lo-Z
๏ƒ˜Line level
๏ƒ˜NOTE - Muted in BYPASS
4. 18 Volt DC power input (on back)
๏ƒ˜500mA maximum
๏ƒ˜2.1mm x 5.5mm barrel connector
๏ƒ˜Tip negative
OUTPUT CONTROLS
A. Unbalanced Output PHASE REVERSE
๏ƒ˜Inverts unbalanced output polarity
B. Balanced Output PHASE REVERSE
๏ƒ˜Inverts balanced output polarity
C. Output GROUND LIFT
๏ƒ˜Eliminates hum from ground loops
TranZformer LX
TONE Control
Frequency
Response
API, TranZformer, and the
API โ€˜spearsโ€™ logo are
registered trademarks of
Automated Processes, Inc.


Product specificaties

Merk: API Audio
Categorie: Gitaarversterker
Model: Tranzformer LX

Heb je hulp nodig?

Als je hulp nodig hebt met API Audio Tranzformer LX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Gitaarversterker API Audio

Handleiding Gitaarversterker

Nieuwste handleidingen voor Gitaarversterker