Apart SUBLIME-W Handleiding

Apart Subwoofer SUBLIME-W

Lees hieronder de 📖 handleiding in het Nederlandse voor Apart SUBLIME-W (8 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

The APart SUBLIME subwoofer is designed to reproduce a fat and deep bass despite its slim

dimensions.

This subwoofer is the ideal partner for the APart MASK2 satellite speakers. A custom made lter and

protection circuitry is incorporated inside the SUBLIME speaker, allowing optimal blending with the

MASK2 satellite speakers.

Optionally, you can use the SUBLIME speaker in an active speaker setup, using an active lter and

separate power amplier. You can use the SUBLIME up to 200 Hz.

The cabinet is only 12 cm deep, and the speaker and connection terminals are invisible when mounted

on the wall using the included wall mounting brackets.

It may look like a small heating radiator when mounted to the wall, but instead of heat, it will radiate

musical vibes in your room.

Due to its discrete design and small dimensions, the subwoofer is very easy to integrate even in the

most demanding environments. You can use it lying at on the oor, hide it under a bench, behind the

curtains, or even mount it on the wall using the included wall mounting brackets.

In order to get the most satisfying sound, it is essential that you read this section carefully prior to

connecting the subwoofer to your system.

It is generally believed that low frequencies are nondirectional and therefore, placement of a subwoofer

within the listening room is not critical ... however :

Please note that the performance of the subwoofer is directly related to its placement in the

listening room.

Placement close to a room corner, will increase the amount of bass output, while placing the subwoofer

along the middle of a wall, or out in the middle of a room will decrease the amount of bass output.

Experiment with a number of different placement options to nd the one that best suits your particular

room and musical taste.

Other locations will provide varying degrees of low bass impact and blending with your front speakers.

We recommend listening to your system, with the subwoofer in different room positions,

to obtain a location with an optimum response.

If you hear too little bass : try moving the subwoofer further towards the room corner or try reversing the

polarity of the satellites (phase reverse).

IMPORTANT NOTES: this speaker will perform awlessly only when you follow our

amplier and system recommendations.

Do not apply clipped or overloaded signals. Do not apply high power bass lower than 50 Hz.

This speaker is NOT magnetically shielded, so if you have a CRT screen, place the speaker at sufcient

distance from the screen. Modern plasma, LCD, TFT or LED screens are insensitive to magnetic

interference, so you can install this speaker close to such devices without limitations.

For possible and supported speaker/amp combinations, ask your dealer or take a look at our speaker

sets on our website :

www.apart-audio.com

We recommend to use the subwoofer mounted to the wall. Special mounting brackets are included.

First, position the subwoofer on a table with the connection terminals facing up (towards you).

Protect the surface by using the packing material. A speaker template with the location of the drill holes

is included with the subwoofer. Position the SPEAKER template on the subwoofer’s backplate and drill

the mounting holes with a 2 mm drill. Fix the brackets on the backplate.

Next, position the WALL template on the wall and mark the drill holes.

Fix the remaining brackets on the wall. Connect the speaker cable to the terminals.

Carefully slide the subwoofer over the wall brackets and push it rmly in place.

A few millimeters of tolerance allows you a nice t, and also some extra suspension,

resulting in good acoustical insulation from the wall.

This speaker has been carefully packed at the factory. Open the carton box and remove the speaker

from the packing. Do not use sharp objects to remove the protective bag from the speaker.

Place the speaker on a at surface. The mounting brackets are included in the packing.

When the product shows signs of damage caused by transportation, contact your dealer immediately.

Damage due to transport and rough handling is not covered by the manufacturers warranty.

Product specificaties

Merk:	Apart
Categorie:	Subwoofer
Model:	SUBLIME-W
Impedantie:	8 Ohm
Gemiddeld vermogen subwoofer:	160 W
Frequentiebereik subwoofer:	50 - 200 Hz
Breedte van de subwoofer:	470 mm
Hoogte van de subwoofer:	420 mm
Diepte van de subwoofer:	120 mm
Gewicht subwoofer:	8000 g