Apart CONCEPT1 Handleiding

Apart Receiver CONCEPT1

Lees hieronder de 📖 handleiding in het Nederlandse voor Apart CONCEPT1 (12 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
3 basic operating modes combined in 1 device: stereo, 2Zone linked mono and 2Zone individual mono.
Paging microphone input with 2 zone programmable paging control.
Standalone and/or RS232 controlled operation.
Removable 19 inch rack ears included.
Menu driven hidden conî‚¿guration accessible for installers only.
Lockable front panel controls.
Super simple no-nonsense user interface.
Multi functional stylish blue colour dot matrix gas display.
Presettable paging mic gain and separate tone control.
Integrated switchable highpass î‚¿lter for use with optional subwoofers.
Separate line out and pre out.
4 stereo gain-adjustable line inputs with additional link-out on input 1.
Line 4 input also available as a mini jack in on the frontpanel for connection of personal audio devices.
Programmable maximum microphone and music levels for all zones.
Switchable automatic loudness compensation.
Low impedance (Concept 1) and 100 volt speaker line outputs (Concept 1T) available.
Powerfull dynamic power ampliî‚¿er circuit
Intelligent power limiter circuit.
1 or 2 zone paging microphone optionally available.
IR remote control optionally available.
IR control extender optionally available.
2
10
91 3 4 5
11
678
1) Power on/off button: push this button to turn the power on and off
2, 3, 4, 5) Source A-D selector: push this button to select line source A-D. A led above the knobs is
lit when source A-D is selected.
6) Source D mini jack input: this line input is shared with the source D connector at the rear
Only use one of the two at the same time.
7) Select button: push this button to select basic submenus
8) Multifunctional encoder knob: turn this knob to adjust the main volume and other menu parameters
9) Stand-by led: this led is lit when the unit is powered off by RS232 control or infrared remote.
The led will ash when data is transmitted or received from any remote control.
10) Infrared receiver
11) Multi functional dot matrix gas display


Product specificaties

Merk: Apart
Categorie: Receiver
Model: CONCEPT1
Kleur van het product: Zwart
Gewicht: 6600 g
Gewicht verpakking: 7600 g
Breedte verpakking: 530 mm
Diepte verpakking: 380 mm
Hoogte verpakking: 170 mm
Stroomvoorziening: 230 - 240V, 50/60 Hz
Connectiviteitstechnologie: Bedraad
Aansluitingen: 1x RS 232
Impedantie: 4 Ohm
Frequentiebereik: 10 - 40000 Hz
Afmetingen (B x D x H): 430 x 290 x 88 mm
Totale harmonische vervorming (THD): 0.05 procent
Afstandsbediening inbegrepen: Ja
Stroomverbruik (typisch): 170 W
Bedrijfstemperatuur (T-T): 0 - 40 °C

Heb je hulp nodig?

Als je hulp nodig hebt met Apart CONCEPT1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Apart

Handleiding Receiver

Nieuwste handleidingen voor Receiver