Anton/Bauer TWIN Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Anton/Bauer TWIN (8 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 71 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
One World. One Smart Choice.
Owners Manual
TWIN
A7595-0181 Rev L
Simultaneous Two Position Charger
®
Approved Copy
TABLE OF CONTENTS
1 INTRODUCTION
STANDARD FEATURES
SAFEGUARDS
GROUNDING AND EARTHING
2 OPERATION
Self-Test
Charging
Applications
Three Stage Charging Methodology
3 OPERATION CONTINUED
Removal of AC Mains Power
LED Indications
CHARGE TIMES
4 FCC NOTICE
SPECIFICATIONS
5 LIMITED WARRANTY
Approved Copy
1
INTRODUCTION
The TWIN is a simultaneous Two Position charger for all Anton/Bauer®
Gold Mount® Batteries. Its lightweight and small size makes it an ideal
charger for travel. As a simultaneous charger each position operates
independently allowing two batteries to charge at the same time.
(see battery charge times pg 3.)
The TWIN is fully compatible with all current and future Anton/Bauer
Logic Series® batteries and delivers all the advancements and proven
reliability of InterActive® charging. Like all Anton/Bauer chargers,
everything is automatic. Once a battery is placed on the TWIN, the
charger will evaluate the battery and then execute the proper charge
routine.
STANDARD FEATURES
Simultaneous Charging for all Anton/Bauer Logic Series®
batteries.
Full InterActive technology including six simultaneous charge
termination systems, Balance and Rejuvenation modes, and
LifeSaver® Maintenance mode.
Wide range mains input compatibility (100-240 VAC 50-60 Hz)
automatically adapts to any mains source worldwide.
Expanded InterActive® communications with DIGITAL batteries,
anticipating new cell technologies.
Slim, ultra-lightweight design for easy portability.
This unit was packaged at the factory to arrive intact at its
destination. If there is any damage to the packaging or the unit
when received, please notify the carrier immediately.
SAFEGUARDS
Power Sources: This unit was designed to operate at mains
voltges from 100 to 240 Volts AC, 50-60 Hz.
Risk of Electrical Shock: Refer servicing to quali ed service
personnel.
Important: When powering charger using a generator, the generator
must produce a sine wave or modi ed sine wave output, otherwise
the charger may be damaged.
TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO
DRIPPING OR SPLASHING, AND NO OBJECTS
FILLED WITH LIQUIDS SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
GROUNDING/EARTHING
IMPORTANT WARNING: THIS APPARATUS
MUST BE EARTHED.
To ensure safe operation, the three pin plug supplied must be
inserted only into a standard three-pin power point that is effectively
grounded through the normal household wiring. Extension cords
used with the equipment must be three-conductor and be correctly
wired to provide connection to earth ground. Improperly wired
extension cords are a dangerous electrical hazard.
The fact that the equipment operates satisfactorily does not imply
that the power point is properly grounded and that the installation
is completely safe. If any doubt exists about the correct grounding
of the power point, consult a quali ed electrician.
IMPORTANT: The wires in this main lead are colored in accor-
dance with the following code:
Green and yellow Earth
Blue Neutral
Brown Live
Approved Copy


Product specificaties

Merk: Anton/Bauer
Categorie: Batterij-oplader
Model: TWIN
Kleur van het product: Zwart
Gewicht: 500 g
Breedte: 58.4 mm
Diepte: 144.8 mm
Hoogte: 127 mm
Ondersteund aantal accu's/batterijen: 2
Ingangsspanning: 100-240 V
Frequentie: 50/60 Hz

Heb je hulp nodig?

Als je hulp nodig hebt met Anton/Bauer TWIN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Batterij-oplader Anton/Bauer

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader