Antec Sonata Solo Handleiding

Antec Computerbehuizing Sonata Solo

Lees hieronder de 📖 handleiding in het Nederlandse voor Antec Sonata Solo (11 pagina's) in de categorie Computerbehuizing. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Sonata Solo / Solo White /

Designer 500 / Plus 550

User’s Manual

Manuel de l’utilisateur

Anwenderhandbuch

Manuale per l’operatore

Manual del usuario

পᡅ䂀ᯢ᳌

At Antec, we continually refine and improve our products to ensure the highest

quality. It’s possible that your new case will differ slightly from the descriptions

in this manual. This isn’t a problem; it’s simply an improvement. As of the date of

publication, all features, descriptions, and illustrations in this manual are correct.

Sonata Solo / Solo White / Designer 500 / Plus 550

SUPER QUIET MINI TOWER CASES

USER’S MANUAL

The Sonata Solo / Solo White / Designer 500 / Plus 550 cases are designed with

Quiet Computing™ in mind. Many unique design features help make this case quiet

and cool.

1. Solid steel structure (1.0 mm thick steel).

2. Two-layer (steel/plastic) side and top panels to deaden noise.

3. Dual hard drive mounting system for maximum noise reduction.

4. Quiet 120mm TriCool™ rear fan.

5. Dual front 92mm fan mounts for spot cooling hard drives.

6. Intake vents along the sides of the front bezel to prevent noise from leaking

toward the user.

7. Built-in cable organizer to tuck away extra cables behind the hard drive cage.

8. The Sonata Designer 500 comes with the environmentally friendly EarthWatts

500 power supply unit (PSU), which meets the 80PLUS® specification.

9. The Sonata Plus 550 comes with the NeoPower 550 PSU with better

power distribution and modular cabling.

10. The Sonata Solo / Solo White comes without any PSU, which allows you to

add the Antec PSU of your choice.

Setting Up

1. Place the case upright on a flat, stable surface.

2. Loosen the thumbscrews from the left side panel. Remove it by swinging it

out. Do not use your fingernail to pry or lift the panels.Note:

3. Inside the case you should see the PSU, some wiring with marked connectors

(USB, PWR etc.), an installed I/O panel, a power cord, a plastic bag containing

modular PSU output cables a plastic bag with (for Sonata Plus 550 model),

more hardware (screws, brass standoffs, specialty screws, etc.), and six

drive rails.

4. Three plastic tabs on the left side of the bezel fasten the front bezel to the

metal chassis. Release the tabs from the top down to release the bezel.

5. Swing open the bezel about 45º and gently lift the bezel upward. The front

bezel will come off easily. Set the bezel in a safe place.

Installing the Motherboard

This manual does not cover CPU, RAM, or expansion card installation. Please consult

your motherboard manual for specific mounting instructions and troubleshooting.

Disclaimer

This manual is intended only as a guide for Antec’s Computer Enclosures. For more

comprehensive instructions on installing the motherboard and peripherals, please

refer to the user’s manuals that come with those components.

1. Make sure you have the correct I/O panel for your motherboard. If the panel

provided with the case isn’t suitable, please contact your motherboard

manufacturer for the correct I/O panel.

2. Line up your motherboard with the standoff holes, and remember which holes

are lined up. Not all motherboards will match with all the provided holes; this

is normal, and won’t affect functionality. (In other words, there will likely be

extra holes.)

3. Remove your motherboard by lifting it up.

4. Screw the brass standoffs into the threaded holes that line up with your

motherboard. Do not over-tighten the standoffs. Some standoffs may be

pre-installed for your convenience.

5. Place your motherboard on the brass standoffs.

6. Fasten your motherboard to the standoffs with the provided Philips-head

screws. Your motherboard is now installed.

Connecting the Front I/O

1. Connect the Reset switch (labeled RESET SW) to the motherboard at the RST

connector. Polarity (positive and negative) does not matter for switches.

2. Power Switch (labeled POWER SW) connects to the PWR connector on the

motherboard.

3. Connect the Power LED (labeled POWER LED) to your motherboard. For

LEDs, colored wires are positive (+). White or black wires are negative

(–). If the LED does not light up when the system is powered on, try

reversing the connection. For more info on connecting LEDs to your

motherboard, see your motherboard manual.

4. Hard Drive LED (labeled HDD LED) connects to the hard drive activity

header.

Connecting the USB Ports

You will find a single 10-pin connector on a cable attached to the front USB ports.

This is an Intel® standard connector that is keyed so that it can’t be accidentally

reversed when connected to a proper Intel® standard motherboard header. Connect

the 10-pin connector to the motherboard headers so that the blocked pin fits over

the missing header pin.

Note: Please check the motherboard manual for the USB header pin layout and

make sure it matches the table below. If it does not match this Intel® standard,

please visit Antec’s web store at http://www.antec.com/StoreFront.bok and

search for part number 30095 to order a USB Internal Adapter Cable. This adapter

will allow you to connect the front USB to your motherboard on a pin-by-pin basis.

Motherboard USB Pin Layout

Pin Signal Names Pin Signal Names

1USB Power 1 2USB Power 2

3Negative Signal 1 4Negative Signal 2

5Positive Signal 1 6Positive Signal 2

7Ground 1 8Ground 2

9Key (No Connection) 10 Empty Pin

1 2

109

Product specificaties

Merk:	Antec
Categorie:	Computerbehuizing
Model:	Sonata Solo
Kleur van het product:	Zwart, zilver
Gewicht:	9200 g
Breedte:	206 mm
Diepte:	470 mm
Hoogte:	432 mm
Soort:	PC
Aan/uitschakelaar:	Ja
Vormfactor:	Mini Tower
Aantal USB 2.0-poorten:	2
Audio-ingangen:	Ja
Audio-uitgang:	Ja
Materiaal:	Staal
Aantal IEEE 1394-/Firewire-poorten:	1
Externe drive bays:	5.25" x 3
Interne drive bays:	3.5" x 4
Supported motherboard form factors:	ATX, Micro ATX, Mini-ATX