Antec Atlas 550 Handleiding

Antec Computerbehuizing Atlas 550

Lees hieronder de 📖 handleiding in het Nederlandse voor Antec Atlas 550 (8 pagina's) in de categorie Computerbehuizing. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Atlas 550 Quiet Mini Server Case

User’s Manual

Manuel de l’utilisateur

Anwenderhandbuch

Manuale per l’operatore

Manual del usuario

পᡅ䂀ᯢ᳌

At Antec, we continually refine and improve our products to ensure the highest

quality. It’s possible that your new case will differ slightly from the descriptions

in this manual. This isn’t a problem; it’s simply an improvement. As of the date of

publication, all features, descriptions, and illustrations in this manual are correct.

Atlas 550 User’s Manual

Atlas 550 – Quiet Mini Server Case

This case comes with a TruePower Trio™ 550 Watt power supply unit (PSU).

It complies with the newest Intel® EPS12V specification. The PSU comes with a

main power switch. Make sure you turn the switch to the ON (I) position before

you boot up the computer for the first time. Normally, you won’t need to switch

to the OFF (O) position, since the PSU includes a soft on/off feature. This lets you

turn the computer on and off by using the soft switch on the computer case.

If the computer crashes and you can’t shut it down using the soft switch, you can

switch the main power to the OFF (O) position to shut the system down.

Then turn the switch back to the ON (I) position and reboot.

Antec TruePower Trio™ power supplies feature Power Factor Correction (PFC)

circuitry in accordance with European standard regulation code EN61000-3-2.

By altering the input current wave shape, PFC improves the power factor of the

PSU. A better Power Factor increases energy efficiency, reduces heat, improves

output voltage stability and prolongs the life of all equipment. The PSU’s high

efficiency design and quiet fan deliver not only a cleaner but also a quieter

operating environment.

Although care has been taken to prevent sharp edges in your Antec case, we

strongly recommend taking your time and the appropriate care when working with

it. Hurried or careless motion and use of excessive force, particularly when you are

working in areas you cannot see clearly, are but a few examples of activity that

should be avoided. Please use reasonable precaution.

Setting Up

1. Place the case upright on a flat, stable surface.

2. Loosen the thumbscrews from the right side panel and remove it by swinging

it out. : Do not use your fingernails to pry or lift the panels.Note

3. Inside the case you should see the power supply, some wiring with marked

connectors (USB, PWR etc.), the installed I/O panel, a power cord, a plastic

bag containing more hardware (screws, brass standoffs, etc.), and six drive

rails.

4. There are three plastic tabs on the left side of the bezel that fasten it to the

metal chassis. Release the tabs from the top down to release the bezel.

5. Swing the bezel open to about 45º, gently lift it up and it will come off

easily. Set the bezel aside in a safe place.

Disclaimer

This manual is intended only as a guide for Antec’s Computer Enclosures. For more

comprehensive instructions on installing the motherboard and peripherals, please

refer to the user’s manuals that come with those components.

Installing the Motherboard

This manual does not cover CPU, RAM, or expansion card installation.

Please consult the motherboard manual for specific mounting instructions and

troubleshooting.

1. Lay the case down with the open side facing up. The drive cages and power

supply should be visible.

2. Make sure you have the correct I/O panel for the motherboard. If the panel

provided with the case isn’t suitable, please contact the motherboard

manufacturer for the correct I/O panel.

3. Line up the motherboard with the standoff holes, and remember which holes

are lined up. Not all motherboards will match with all the provided holes; this

is normal and won’t affect functionality.

4. Remove the motherboard.

5. Screw the brass standoffs into the threaded holes that line up with the

motherboard. : Do not over-tighten the standoffs. Some standoffs may Note

be pre-installed for your convenience.

6. Place the motherboard on the brass standoffs.

7. Screw in the motherboard to the standoffs with the provided Philips-head

screws. The motherboard is now installed.

Connecting the Power and LED

1. Connect the 24-pin Main Power Connector and

the 4-pin +12V connector to your motherboard as

needed. If your motherboard uses a 20-pin connec-

tor, detach the 4-pin attachment on the 24-pin power

connector. (see pictures 1 and 2).

2. Connect the Reset switch (labeled RESET SW) to your motherboard at the

RST connector.

3. Connect the 4-pin molex connector from the front display to a 4-pin molex

connector on the power supply.

4. The Power Switch (labeled POWER SW) connector connects to the PWR connector

on the motherboard.

5. The Hard Drive LED (labeled H.D.D. LED) connector connects to the hard drive

activity header.

Power supply 3-PIN fan signal connector

A three-pin signal connector with blue and black wires is available to connect the

power supply to one of your motherboard’s fan connectors ( Some motherboards Note:

have a dedicated fan connector labeled PWR-FAN or PSU-FAN that is specifically for

the power supply). This connector is for monitoring the power supply’s fan speed

only. It is optional—the power supply and its fan will operate normally whether

this cable is connected to your motherboard or not.

The fan speed can be monitored through the BIOS or special monitoring software

that came with your motherboard. To ensure proper monitoring of the power supply

fan, please check your motherboard manual.

Note: At low temperatures, the fan may run as slow as 750 RPM (±10%). At

these speeds, some motherboards may not properly detect the fan speed and may

generate false warnings of fan failure.

Picture 1 Picture 2

For 24-pin

motherboards

For 20-pin

motherboards

Product specificaties

Merk:	Antec
Categorie:	Computerbehuizing
Model:	Atlas 550
Kleur van het product:	Zwart
Gewicht:	13600 g
Breedte:	205 mm
Diepte:	468 mm
Hoogte:	430 mm
Soort:	PC
Gebruiksaanwijzing:	Ja
Vormfactor:	Desktop
Aantal USB 2.0-poorten:	2
Audio-ingangen:	Ja
Audio-uitgang:	Ja
Vermogenstoevoer inclusief:	Nee
Aantal IEEE 1394-/Firewire-poorten:	1
Aantal 5.25" bays:	4
Aantal 3.5" bays:	4
Ondersteunde HDD-groottes:	2.5, 3.5 "
Supported motherboard form factors:	ATX, Micro ATX, Mini-ITX
Zijraam:	Nee
Aantal geïntstalleerde ventilators voorkant:	1x 120 mm