Antec NSK3480-UK MicroATX Handleiding

Antec Computerbehuizing NSK3480-UK MicroATX

Lees hieronder de 📖 handleiding in het Nederlandse voor Antec NSK3480-UK MicroATX (8 pagina's) in de categorie Computerbehuizing. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

New Solution Series

NSK3480

User’s Manual

Manuel de l’utilisateur

Anwenderhandbuch

Manuale per l’operatore

Manual del usuario

পᡅ䂀ᯢ᳌

At Antec, we continually refine and improve our products to ensure the highest

quality. It’s possible that your new case will differ slightly from the descriptions

in this manual. This isn’t a problem; it’s simply an improvement. As of the date of

publication, all features, descriptions, and illustrations in this manual are correct.

New Solution Series User’s Manual

NSK 3480

Quiet microATX Case

The NSK3480 Case with EA-380 power supply

The NSK3480 comes with an EarthWatts 380 watt PSU. Universal input, active

PFC single 80mm fan cooled power supply that follows the ATX12V version 2.2

specifications. This includes dual +12V output rails that deliver safer and more

reliable output to your system’s components. Featuring higher energy efficiency,

which reduces power consumption by up to 25%, saving you money on your

electricity bill. EarthWatts power supplies have achieved 80 PLUS® Certification,

the latest independent standard in power supply efficiency. In addition EarthWatts

includes a variety of protective circuitry: OPP (over power protection), OVP (over

voltage protection), and SCP (short circuit protection).

This power supply is backwards compatible with previous ATX form factor power

supplies. To make sure you connect the power supply properly, please refer to the

user manuals supplied with the motherboard and peripherals before connecting any

of them to the power supply.

The power supply comes with a main power switch. Make sure you turn the

switch to the ON (I) position before you boot up the computer for the first time.

Normally, you won’t need to switch to the OFF (O) position, since the power sup-

ply includes a soft on/off feature. This lets you turn the computer on and off by

using the soft switch on the computer case. If the computer crashes and you can’t

shut it down using the soft switch, you can switch the main power to the OFF (O)

position, to clear the fault, then reboot.

Antec power supply models feature Power Factor Correction (PFC) circuitry in

accordance with European standard regulation code EN61000-3-2. By altering the

input current wave shape, PFC improves the power factor of the PSU. A better

Power Factor increases energy efficiency, reduces heat, improves output voltage

stability and prolongs the life of your equipment. The PSU’s high efficiency design

and quiet fan deliver not only a cleaner but also a quieter operating environment.

The Dual Chamber Structure

The case is divided into two chambers. The motherboard chamber and the power

supply chamber are separated from each other for maximum quiet and optimal

cooling.

Disclaimer

This manual is intended only as a guide for Antec’s Computer Enclosures. For more

comprehensive instructions on installing the motherboard and peripherals, please

refer to the user’s manuals that come with those components.

Set Up

1. Take the case out of the box. Remove the foam packing material and

plastic bag.

2. Place the case upright with the power supply fan at the back facing you on a

stable flat surface.

3. Remove the two thumbscrews fastening to the top cover of the case. Set

these screws aside and keep them separate from the other screws.

4. Slide the top panel toward the rear of the case and lift it up.

5. There are tabs at the top of each side panel located in front the power

supply. Lift and pull the side panels out using the tabs.

6. Inside the case you should see the power supply, some wiring (LED’s, etc.),

an installed I/O panel, a power cord and a plastic bag containing more

hardware (screws, brass standoffs, plastic stands, etc.).

Motherboard Installation

This manual is not designed to cover CPU, RAM, or expansion card installation.

Please consult the motherboard manual for specific mounting instructions and

troubleshooting.

1. Lay the case down so that the open side is up. You should be able to see the

drive cage and power supply.

2. Make sure you have the appropriate I/O panel for the motherboard. If the

panel provided is not suitable for the motherboard, please contact the

motherboard manufacturer for the correct I/O panel.

3. Line up the motherboard with the standoff holes, and determine which ones

line up and remember where they are. Not all motherboards will match with

all of the provided screw holes, and this is not necessary for proper

functionality. Some standoffs may be pre-installed for your convenience.

4. Lift up and remove the motherboard.

5. Screw in the brass standoffs to the threaded holes that line up with the

motherboard.

6. Place the motherboard on the brass standoffs.

7. Screw in the motherboard to the standoffs with the provided Phillips-head

screws.

8. The motherboard is now installed.

Connecting the Power and LED

The power supply conforms to the ATX12V v2.2 standard. Before you connect

the power supply to any of the devices, please consult the appropriate user

manuals for the motherboard and other peripherals.

1. You will need to route the cables from

the power supply to the rest of the case.

You can use either of the two holes in

picture 1. One is narrow and will work for

all types of power and interface cables

except PCI-E or the main 20 or 24-pin

connector. Those larger connectors must

be routed through the side.

2. Connect the 24-pin Main Power Connector and the 4-pin 12V connector to

the motherboard. If the motherboard uses a 20-pin connector then detach the

4-pin attachment on the 24-pin power connector (see pictures 2 and 3).

Picture 1

Product specificaties

Merk:	Antec
Categorie:	Computerbehuizing
Model:	NSK3480-UK MicroATX
Kleur van het product:	Zwart, zilver
Gewicht:	9500 g
Breedte:	200 mm
Diepte:	360 mm
Hoogte:	350 mm
Soort:	PC
Vormfactor:	Micro Tower
Aantal USB 2.0-poorten:	2
Netvoeding:	380 W
Audio-ingangen:	Ja
Audio-uitgang:	Ja
Soort voeding:	EarthWatts 380W ATX12V v2.2
Aantal IEEE 1394-/Firewire-poorten:	1
Uitbreidingsslots:	4
Externe drive bays:	2 x 5.25", 1 x 3.5"
Interne drive bays:	1 x 3.5"
Ventilator(en):	1 x 120mmTriCool
Optionele ventilatoren:	2 x 92mm