Antec NSK 6580B Handleiding

Antec Computerbehuizing NSK 6580B

Lees hieronder de 📖 handleiding in het Nederlandse voor Antec NSK 6580B (9 pagina's) in de categorie Computerbehuizing. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

New Solution Series

NSK 6000, 6580 and 6580B

User’s Manual

Manuel de l’utilisateur

Anwenderhandbuch

Manuale per l’operatore

Manual del usuario

পᡅ䂀ᯢ᳌

At Antec, we continually refine and improve our products to ensure the highest

quality. It’s possible that your new case will differ slightly from the descriptions

in this manual. This isn’t a problem; it’s simply an improvement. As of the date of

publication, all features, descriptions, and illustrations in this manual are correct.

New Solution Series User’s Manual

NSK 6000, NSK 6580 and NSK6580B

Quiet Super Mid Tower Case

This case is designed to meet Intel’s Thermally Advantaged Chassis (TAC) design

guide requirements.

The Power Supply

While the NSK 6000 does not offer a PSU the NSK 6580 and the NSK6580B

come with an EarthWatts 430 watt PSU. Universal input, active PFC single 80mm

fan cooled power supply that follows the ATX12V version 2.2 specifications. This

includes dual +12V output rails that deliver safer and more reliable output to your

system’s components. Featuring higher energy efficiency, which reduces power

consumption by up to 25%, saving you money on your electricity bill. EarthWatts

power supplies have achieved 80 PLUS® Certification, the latest independent

standard in power supply efficiency. In addition EarthWatts includes a variety of

protective circuitry: OPP (over power protection), OVP (over voltage protection),

and SCP (short circuit protection).

The PSU comes with a main power switch. Make sure you turn the switch to the

ON (I) position before you boot up the computer for the first time. Normally, you

won’t need to switch to the OFF (O) position, since the PSU includes a soft on/off

feature. This lets you turn the computer on and off by using the soft switch on the

computer case. If the computer crashes and you can’t shut it down using the soft

switch, you can switch the main power to the OFF (O) position to shut the system

down. Then turn the switch back to the ON (I) position and reboot.

Antec power supply models feature Power Factor Correction (PFC) circuitry in

accordance with European standard regulation code EN61000-3-2. By altering the

input current wave shape, PFC improves the power factor of the PSU. A better

Power Factor increases energy efficiency, reduces heat, improves output voltage

stability and prolongs the life of all equipment. The PSU’s high efficiency design

and quiet fan deliver not only a cleaner but also a quieter operating environment.

Setting Up

Although care has been taken to prevent sharp edges in your Antec case, we

strongly recommend taking your time and the appropriate care when working with

it. Hurried or careless motion and use of excessive force, particularly when you are

working in areas you cannot see clearly, are but a few examples of activity that

should be avoided. Please use reasonable precaution.

1. Place the case upright on a flat, stable surface. The power supply fan should

be at the back, facing you.

Disclaimer

This manual is intended only as a guide for Antec’s Computer Enclosures. For more

comprehensive instructions on installing the motherboard and peripherals, please

refer to the user’s manuals that come with those components.

2. Remove the screws from the right side panel.

3. There are two latches on the side panel. Slide the latches towards the front

of the case and swing open the panel.

4. Inside the case you should see the power supply, some wiring with marked

connectors (USB, PWR etc.), and installed I/O panel and a power cord.

Installing the Motherboard

This manual does not cover CPU, RAM, or expansion card installation. Please

consult the motherboard manual for specific mounting instructions and

troubleshooting.

1. Lay the case down, with the open side facing up. The drive cages and power

supply should be visible.

2. Make sure you have the appropriate I/O panel for the motherboard. If the

panel provided is not suitable for the motherboard, please contact the

motherboard manufacturer for the correct I/O panel.

3. Line up the motherboard with the standoff holes, and remember which holes

are lined up. Not all motherboards will match with all the provided holes; this

is normal, and won’t affect functionally.

4. Remove the motherboard by lifting it up.

5. Screw the brass standoffs into the threaded holes that line up with the

motherboard. Do not overtighten the standoffs. Some standoffs may be

pre-installed for your convenience.

6. Place the motherboard on the brass standoffs.

7. Screw in the motherboard to the standoffs with the provided Philips-head

screws.

8. The motherboard is now installed.

Connecting the Power and LED

The power supply conforms to the ATX12V Version 2.2 standard. If the

motherboard has a 20-pin power receptacle, detach the 4-pin attachment on the

24-pin power connector, see pictures 1 and 2. Before you connect the power

supply to any devices, please consult the appropriate user manuals for the

motherboard and other peripherals.

1. Connect the 24-pin Main Power Connector and the 4-pin or 8-pin 12V con-

nector to the motherboard as needed. If the mother-

board uses a 20-pin

connector; detach the 4-pin attachment on the

24-pin power connector (see pictures 1 and 2).

Note: the detachable 4-pin section cannot be used

in place of a 4-pin +12V connector.

2. Connect the Reset switch (labeled RESET SW) to

the motherboard at the RST connector. Polarity

(positive and negative) does not matter for switches.

3. Power Switch (labeled POWER SW) connects to the PWR connector on the

motherboard.

4. Power LED (labeled POWER LED) connector is located behind the Reset

connector. For LEDs, colored wires are positive (+). White or black wires are

negative (–). If the LED does not light up when the system is powered on,

try reversing the connection. For more info on connecting LEDs to your

motherboard, see your motherboard manual.

5. Hard Drive LED (labeled H.D.D. LED) connects to the IDE connector.

Picture 1 Picture 2

For 24-pin

motherboards

For 20-pin

motherboards

Product specificaties

Merk:	Antec
Categorie:	Computerbehuizing
Model:	NSK 6580B
Kleur van het product:	Zwart
Gewicht:	11600 g
Breedte:	210 mm
Diepte:	472 mm
Hoogte:	465 mm
Soort:	PC
Vormfactor:	Mini Tower
Aantal USB 2.0-poorten:	2
Certificering:	80 PLUS
Netvoeding:	430 W
Audio-ingangen:	Ja
Audio-uitgang:	Ja
Aantal IEEE 1394-/Firewire-poorten:	1
Uitbreidingsslots:	7
Externe drive bays:	4 x 5.25"
Interne drive bays:	5 x 3.5"
Ventilator(en):	1x 120mm
Optionele ventilatoren:	2 x 92mm