Antec Nine Hundred Handleiding

Antec Computerbehuizing Nine Hundred

Lees hieronder de đź“– handleiding in het Nederlandse voor Antec Nine Hundred (10 pagina's) in de categorie Computerbehuizing. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
Nine Hundred
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
পᡅ䂀ᯢ᳌
1
Disclaimer
This manual is intended only as a guide for Antec’s Computer Enclosures. For more
comprehensive instructions on installing the motherboard and peripherals, please
refer to the user’s manuals that come with those components.
At Antec, we continually refine and improve our products to ensure the highest
quality. As such, your new case may differ slightly from the description in this
manual. This isn’t a problem; it’s simply an improvement. As of the date of publication,
all features, descriptions, and illustrations in this manual are correct.
Nine Hundred User’s Manual
Nine Hundred – Gaming Case
The Nine Hundred comes without a power supply. Make sure you choose a power
supply that is compatible with your computer components and has a long enough
power harness to reach your motherboard and peripheral devices. We recommend
our TruePower Quattro, TruePower Trio, or NeoPower power supplies for the latest
ATX specification compliance, broad compatibility, and power savings capability.
Although care has been taken to prevent sharp edges in your Antec case, we
strongly recommend taking the appropriate time and care when working with it.
Avoid hurried or careless motions. Please use reasonable precaution.
Attention:
The Nine Hundred comes with a top storage area. Antec does not recommend that
users put any liquid-containing items (drinks, ice cream, candles, perfume dis-
pensers, etc.) in this area. It was designed to hold your personal media player, digital
camera, keys, coins, etc.
Setting Up
1. Place the case upright on a flat, stable surface so that
the rear panel (power supply and expansion slots) is
facing you.
2. Remove the panel thumbscrews from a side panel and
open it by sliding it towards yourself.
Note: Place the panel thumbscrews carefully aside as they
are NOT interchangeable with the HDD cage thumb-
screws.
3. Remove the panel thumbscrews from the other side
panel and open it by sliding it towards you. Place the
screws carefully aside. Inside the case is the power sup-
ply mount at the lower rear of the case and the 5.25”
drive bay area with two HDD cages inside the bays. You
will also find some wiring with marked connectors (USB,
PWR etc.), an installed I/O panel and a toolbox contain-
ing more hardware (screws, brass standoffs, etc.)
Note: Don’t use your fingernail to pry or lift the panels.
2
Installing the Motherboard
This manual is not designed to cover CPU, RAM, or expansion card installation.
Please consult the motherboard manual for specific mounting instructions and
troubleshooting. Before proceeding, check the manual for your CPU cooler to find
out if there are steps you must do before installing the motherboard.
1. Lay the case down so that the open side is up.
2. Make sure you have the ap-
propriate I/O panel for the
motherboard. If the panel
provided is not suitable for
the motherboard, please
contact the mother board
manufacturer for the correct
I/O panel.
3. Line up the motherboard with the stand-
off holes. Determine which holes line up
and remember where they are. Not all
motherboards will match with all of the
provided screw holes, and this is not
necessary for proper functionality. Some
standoffs may be pre-installed for your
convenience.
4. Lift up and remove the motherboard.
5. Screw in the brass standoffs to the
threaded holes that line up with the
motherboard.
6. Place the motherboard on the brass
standoffs. Screw in the motherboard
to the standoffs with the provided
Phillips-head screws.
7. The motherboard is now installed.


Product specificaties

Merk: Antec
Categorie: Computerbehuizing
Model: Nine Hundred
Kleur van het product: Zwart
Gewicht: 14100 g
Breedte: 467.36 mm
Diepte: 205.74 mm
Hoogte: 492.76 mm
Soort: PC
Vormfactor: Full Tower
Interne schijfposities: 9
Supported motherboard form factors: ATX
Optionele ventilatoren: 5
Main board size: 12 x 9.6 "

Heb je hulp nodig?

Als je hulp nodig hebt met Antec Nine Hundred stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Computerbehuizing Antec

Handleiding Computerbehuizing

Nieuwste handleidingen voor Computerbehuizing