Antec K/Twelve Hundred-EU Handleiding

Antec Computerbehuizing K/Twelve Hundred-EU

Lees hieronder de 📖 handleiding in het Nederlandse voor Antec K/Twelve Hundred-EU (11 pagina's) in de categorie Computerbehuizing. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Twelve Hundred
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
পᡅ䂀ᯢ᳌
Ё᭛Փ⫼᠟ݞ
1
At Antec, we continually refine and improve our products to ensure the highest
quality. As such, your new case may differ slightly from the description in this
manual. This isn’t a problem; it’s simply an improvement. As of the date of publication,
all features, descriptions, and illustrations in this manual are correct.
Disclaimer
This manual is intended only as a guide for Antec’s Computer Enclosures. For more
comprehensive instructions on installing the motherboard and peripherals, please
refer to the users manuals that come with those components.
Twelve Hundred User’s Manual
Twelve Hundred – Gaming Case
The Twelve Hundred comes without a power supply. Make sure you choose a
power supply that is compatible with your computer components and has a long
enough power harness to reach your motherboard and peripheral devices. We
recommend our TruePower Quattro, TruePower Trio, or NeoPower power supplies for
the latest ATX specification compliance, broad compatibility, and power savings
capability.
Although care has been taken to prevent sharp edges in your Antec case, we
strongly recommend taking the appropriate time and care when working with it.
Avoid hurried or careless motions. Please use reasonable precaution.
Note: The Twelve Hundred comes with a top storage area. Antec does not recommend
that users put any liquid-containing items (drinks, ice cream, candles, perfume
dispensers, etc.) in this area. It was designed to hold your personal media player, digi-
tal camera, keys, coins, etc.
Setting Up
1. Place the case upright on a flat, stable surface so that the rear panel (power
supply and expansion slots) is facing you.
2. Remove the panel thumbscrews from a side panel and open it by sliding it
towards yourself.
Note: Place the panel thumbscrews carefully aside as they are NOT interchangeable
with the HDD cage thumbscrews.
3. Remove the panel thumbscrews from the other side panel and open it by
sliding it towards you. Place the screws carefully aside. Inside the case is the
power supply mount at the lower rear of the case and the 5.25” drive bay
area with three withHDD cages inside the bays. You will also find some wiring
marked connectors (USB, PWR etc.), an installed I/O panel and a toolbox
containing more hardware (screws, brass standoffs, etc.)
Note: Don’t use your fingernail to pry or lift the panels.
2
Installing the Motherboard
This manual is not designed to cover CPU, RAM, or expansion card installation.
Please consult the motherboard manual for specific mounting instructions and
troubleshooting. Before proceeding, check the manual for your CPU cooler to find
out if there are steps you must do before installing the motherboard.
1. Lay the case down so that the open side is up.
2. Make sure you have the appropri-
ate I/O panel for the motherboard.
If the panel provided is not suit-
able for the motherboard, please
contact the motherboard manu-
facturer for the correct I/O panel.
3. Line up the motherboard with the standoff
holes. Determine which holes line up and re-
member where they are. Not all motherboards
will match with all of the provided screw
holes, and this is not necessary for proper
functionality. Some standoffs may be pre-in-
stalled for your convenience.
4. Lift up and remove the motherboard.
5. Screw in the brass standoffs to the threaded
holes that line up with the motherboard.
6. Place the motherboard on the brass standoffs.
Screw in the motherboard to the standoffs
with the provided Phillips-head screws.
7. The motherboard is now installed.
8. If you are installing a water cooling system,
then you may need to run some of the tubing
outside the case through the hose ports with
rubber grommets on the back of the case.
Also, make sure to read about the pump/
reservoir platform feature described near the
end of the manual.


Product specificaties

Merk: Antec
Categorie: Computerbehuizing
Model: K/Twelve Hundred-EU
Kleur van het product: Zwart
Gewicht: 14500 g
Breedte: 213 mm
Diepte: 513 mm
Hoogte: 582 mm
Gewicht verpakking: 17500 g
Breedte verpakking: 300 mm
Diepte verpakking: 600 mm
Hoogte verpakking: 650 mm
Soort: PC
LED-indicatoren: Ja
Vormfactor: Full Tower
Aantal USB 2.0-poorten: 2
Netvoeding: 850 W
Audio-ingangen: Ja
Audio-uitgang: Ja
Interne schijfposities: 13
Aantal eSATA-poorten: 1
Externe drive bays: 3 - 12
Interne drive bays: 1 - 9
Supported motherboard form factors: ATX, Micro ATX, Mini-ITX
Ventilator(en): 1x 200 mm, 5x 120 mm
Optionele ventilatoren: 2x 120 mm

Heb je hulp nodig?

Als je hulp nodig hebt met Antec K/Twelve Hundred-EU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Computerbehuizing Antec

Handleiding Computerbehuizing

Nieuwste handleidingen voor Computerbehuizing