Antari B-200 Handleiding

Antari Bellenblaasmachines B-200

Lees hieronder de 📖 handleiding in het Nederlandse voor Antari B-200 (11 pagina's) in de categorie Bellenblaasmachines. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

B-200 USER MANUAL

B-200 BEDIENUNGSANLEITUNG

Congratulations on the purchase of your new

ANTARI B-200 Bubble Machine.

Wir beglückwünschen Sie zum Kauf Ihrer neuen

ANTARI B-200 Seifenblasenmachine.

 Read and save these instructions

 Bitte lesen Sie diese Anweisungen und bewahren Sie sie gut auf



 2006 Antari Lighting and Effects Ltd.

2/11 51705125_V_1_3.DOC

TeUser Manual

Antari B-200 Bubble Machine

Congratulations on the purchase of your new

ANTARI Bubble Machine.

Introduction

Thank you for choosing the ANTARI B-200 Bubble Machine. You now own a rugged and powerful state-

of-the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following

the suggestions found in this user manual, you can look forward to the reliable and satisfactory

performance of your ANTARI Bubble Machine for years to come.

Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your

bubble machine.

CAUTION!

Pay attention to all warning labels and instructions printed on the exterior of your

Antari Bubble Machine. This appliance must be earthed.

Danger of Electric Shock

 Keep this device dry.

 Keep the bubble machine upright.

 For inside use only. Not designed for outside use.

 For the 110 V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine

that the unit is installed at the rated voltage.

 Do not overfill your bubble machine. Overfilling will cause the unit to leak.

 Do not tilt or angle the bubble machine. This may result in bubble liquid spilling out of the liquid tray.

 Turn off or unplug the machine when not in use.

 This machine is not water-proof or splash-proof. If moisture, water, or bubble fluid gets inside the

housing, immediately unplug the unit and contact a service technician or your ANTARI dealer before

using it again.

 No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.

 This appliance must be earthed.

 For adult use only. The bubble machine must be installed out of the reach of children. Never leave the

unit running unattended.

 Never aim the output at open flames.

 Extended use may make surfaces where the bubbles land slippery.

 Position output of bubbles away from persons.

 Switch off from mains when refilling the liquid or cleaning the system.

 Regular cleaning of the bubble wheel is required.

 Install the bubble machine in a well-ventilated area. Never cover the unit’s vents. In order to guarantee

adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the unit.

 Do not transport with liquid. If the machine gets wet, do not use it before it is completely dry.

 Antari bubble liquid may leave permanent marks on clothing.

3/11 51705125_V_1_3.DOC

Danger of Explosion

 Never add flammable liquids of any kind (such as oil, gas, perfume) to the bubble liquid.

 Use only high-quality, water-based liquid that your dealer recommends. Other liquids may cause

clogging or “spitting”.

 Always make sure there is sufficient liquid in the tank. Operating this unit without liquid will cause

damage to the pump.

 If your ANTARI B-200 Bubble Machine fails to work properly, discontinue use immediately. Drain all

liquid from the tank, pack the unit securely (preferably in the original packing material), and return it to

your ANTARI dealer for service.

 Always drain tank before mailing or transporting this unit.

 Never drink bubble liquid. If it is ingested, call a doctor immediately. If liquid comes in contact with skin or

eyes, rinse thoroughly with water.

Pay attention to all warning labels and instructions printed on the exterior of your

ANTARI Bubble Machine.

Unpacking & Inspection

Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact.

In addition to this user manual, the shipping carton should contain the following items:

1. B-200 Bubble Machine

2. Power cord and plug

3. 1 Mounting bracket

4. 2 pieces of tightening screws and metal screws, 5 pieces of washers, one safety ring.

If any equipment is missing contact your ANTARI dealer immediately.

Before beginning with the initial setup your Bubble Machine, make sure that there is no evident damage

caused by transportation. In the event that the unit’s housing or cable is damaged, do not plug it in and do

not attempt to use it until after contacting your ANTARI dealer for assistance.

Setup

 Remove all packing materials from shipping box. Check that all foam and plastic padding is removed,

especially in the nozzle area.

 Place the bubble machine on a flat surface.

 Fill unit with liquid.

 Attach the hanging bracket with the included tightening and metal screws.

 Attach the M8 safety ring. This hooked safety ring can double insure the machine from falling down when

installed in high positions.

 The B-200 Bubble machine can now be positioned in the desired location. Be careful to keep the

machine even while moving and installing otherwise liquid may spill out of the liquid tray. This is

particularly important when the mounting bracket is used to suspend the B-200.

 Once the machine is securely positioned and a final check is made to insure that no liquid has leaked,

connect the power cord to the electrical supply. If there is any leakage or moisture on the machine, the

cord or the remote, leave the machine unplugged until the B-200 is dry.

 The drainage stub is located at the side of the unit. Turn this rotary stub to drain liquid from the unit.

Make shure to turn the stub back afterwards.

Product specificaties

Merk:	Antari
Categorie:	Bellenblaasmachines
Model:	B-200
Kleur van het product:	Zilver
Gewicht:	11000 g
Ingangsspanning:	100 - 240 V
Frequentie:	50 - 60 Hz
Productafmetingen (B x H x D):	250 x 197 x 421 mm
Stroomverbruik (typisch):	100 W
Vloeistoftank capaciteit:	1.5 l