Anker Soundcore Spirit Dot 2 Handleiding

Anker Hoofdtelefoon Soundcore Spirit Dot 2

Lees hieronder de 📖 handleiding in het Nederlandse voor Anker Soundcore Spirit Dot 2 (79 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/79
Soundcore Spirit Dot 2
USER MANUAL
English 01
Čeština 07
Dansk 13
Deutsch 19
ελληνικά 25
Español 31
Suomi 37
Français 43
Magyar 49
Italiano 55
Nederlands 61
Norsk 67
Język polski 73
Português 79
Pусский 85
Slovenský Jazyk 91
Slovenski Jezik 97
Svenska 103
Türkçe 109
日本語 115
한국어 121
简体中文 127
繁體中文 133
Portugues do Brasil 139
 145

 151
01 EN EN 02
Charging
Slide to open or close the charging case to activate the LED battery indicator.
Fully charge both the earbuds and the charging case before the rst use.
To prevent damage, use the provided USB-C cable.
Fully dry off the earbuds and the USB port before charging.
< 30%
30% - 70%
> 70%
100%
LED behavior (Earbuds)
Flashing red once every 1 minute Low battery
Steady white Being charged
Light off Fully charged
Powering On/Off
The earbuds will automatically power on when taken out of the charging case and power off
when placed back into the charging case.
ON
OFF
To manually power on, press and hold the multi-function button on both earbuds for 2
seconds until the LED indicators turn white for 1 second.
To manually power off, press and hold the multi-function button on both earbuds for 8
seconds until the LED indicators turn red for 1 second.
Pairing
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the
charging case.
LED behavior (Earbuds)
Flashing white TWS connecting
Rapidly ashing white (Primary earbud)
Slowly ashing white (Secondary earbud) TWS connected
The right earbud is the primary earbud by default. In TWS mode, place either one of the
earbuds into the charging case, the other one will switch to be the primary earbud.
When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
Bluetooth Pairing with your Device
1. Take earbuds out of the charging case or manually power on the earbuds, wait for 1 to 3
seconds until the LED indicator on one of the earbuds ashes white, then earbuds enter
the Bluetooth pairing mode successfully.
2. Turn on Bluetooth on your device and click “Soundcore Spirit Dot 2”. The LED indicators
on both earbuds will turn white for 1 second when Bluetooth connected.
03 EN EN 04
1
2 3
Controls
Play / Pause Press twice (R)
Next track Press twice (L)
Volume up / down Control volume via the connected device
Answer / End a call
Press twice (L or R)
Put the current call on hold and answer
an incoming call
Reject a call
Press and hold for 2 seconds (L or R)
Transfer a call between earphones and
mobile phone
Switch between held call and active call
1
2
Soundcore
Spirit Dot 2
Soundcore
Spirit Dot 2
PAIRING
CONNECTED
LED behavior (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
To pair with another Bluetooth device, turn off Bluetooth on the currently connected
device rst.
When earbuds are out of the charging case and powered off, to manually enter Bluetooth
pairing mode, press and hold the multi-function button on both earbuds for 5 seconds.
Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
Wearing
1. Choose the EarTips and EarWings that t your ears best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and nd the most comfortable position.


Product specificaties

Merk: Anker
Categorie: Hoofdtelefoon
Model: Soundcore Spirit Dot 2

Heb je hulp nodig?

Als je hulp nodig hebt met Anker Soundcore Spirit Dot 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hoofdtelefoon Anker

Handleiding Hoofdtelefoon

Nieuwste handleidingen voor Hoofdtelefoon