Anker Mars II Pro Handleiding

Anker Beamer Mars II Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Anker Mars II Pro (83 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/83
V01
Model: D2323
©Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks
of Anker Innovations Limited, registered in the
United States and other countries. All other
trademarks are the property of their respective
owners.
+1 (800) 988 7973 (US) Mon-Fri 9:00am - 5:00pm (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 - 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mo-Fr 6:00 - 11:00
+81 03 4455 7823 ( 日本 ) - 9:00-17:00
Nebula Mars II Pro
User Manual
English
01
Safety Instructions
Read and understand all instructions before you use this device. Do not
make any changes or settings that are not described in this manual.
If physical injury, loss of data or damage is caused by failure to follow
instructions, the warranty does not apply.
Setup
To reduce the risk of re and/or electric shock, do not expose the
device to rain or moisture, and objectslled with liquids, such as
vases, should not be placed on the device.
Do not place the device on soft surfaces such as tablecloths or
carpets as doing so could be a re-hazard.
Do not place the device in areas susceptible to excessive dust and
dirt or near any appliance generating a strong magnetic eld.
To prevent overheating, do not block or clog the ventilation openings.
Never place the device in a conned space. Always leave enough
space around the device for ventilation.
Protect the device against direct sunlight, heat, large temperature
fluctuations and moisture.
When the device runs for a long period of time and the surface
becomes hot, shut it down and unplug the power cord. Resume
operation only after the device has cooled.
Always handle the device with care. Avoid touching the lens.
Never place heavy or sharp objects on the device or the power cord.
To avoid electric shock, do not disassemble.
Only use attachments or accessories specied by the manufacturer.
Avoid extreme vibration. It may damage the internal components.
Do not allow children to handle the device without supervision.
Under the following conditions, a layer of moisture can appear
inside the device which can lead to malfunctions: a) if the device is
moved from a cold to a warm area; b) after a cold room is heated; c)
when the device is placed in a damp room. To avoid any moisture,
seal the device in a plastic bag before moving it to another room,
and wait for one to two hours before you take it out of the bag.
English 01
Deutsch 21
Español 39
Français 57
Italiano 75
Português 93
日本語 111
简体中文 129
ةيِبَرَعل 147
English
English
02 03
Power Supply
Use only the provided power adapter.
Power off the device before removing the power supply from the socket.
Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
this device.
Unplug this device if there are lightning storms or when unused for a
long period of time.
Where the
power
plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
Before you make or change any connections, ensure that all devices
are disconnected from the power outlet.
Never touch the power cable or the power connector with wet hands.
Hearing Safety
To avoid hearing damage, do not listen for extended periods at high
volume. Set the volume at a safe level.
Battery
Do not replace the built-in battery yourself. Contact an authorized
service center to replace it.
The remote control contains coin type batteries which can be
swallowed. Keep the batteries out of reach of children.
Risk of explosion! Keep batteries away from heat, direct sunlight, or
re. Never discard batteries in re.
When the remote control is not used for a long period of time, remove
the batteries.
There is a danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type.
Batteries contain chemical substances, they should be disposed of
properly.
Charge the device regularly. Do not store the device with a
completely discharged battery.
Cleaning
Power off the device and remove it from the power supply before
cleaning the surface.
Use a soft, lint-free cloth. Never use liquid, gaseous, or easily
flammable cleansers (like sprays, abrasives, polishes, and alcohol).
Do not use any liquid cleaning agents to clean the lens as they may
damage the protective coating on the lens.
Wipe over the surfaces gently. Be careful that you do not scratch the
surfaces.
Use lens cleaning paper to clean the lens of the projector.
Repairs
Do not make any repairs to the device yourself. Only have your device
repaired by an authorized service center.
Improper maintenance can result in injuries or damage to the device.
Refer all servicing to qualied service personnel.
Caution:
Possibly hazardous optical radiation emitted from this device.
Do not stare at operating beam. The bright light may hurt your eyes.


Product specificaties

Merk: Anker
Categorie: Beamer
Model: Mars II Pro

Heb je hulp nodig?

Als je hulp nodig hebt met Anker Mars II Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beamer Anker

Handleiding Beamer

Nieuwste handleidingen voor Beamer

Epson

Epson 421i Handleiding

21 November 2024
AOpen

AOpen AV10 Handleiding

21 November 2024
AOpen

AOpen AH15 Handleiding

21 November 2024
AOpen

AOpen PV11 Handleiding

21 November 2024
AOpen

AOpen AV10a Handleiding

21 November 2024
AOpen

AOpen PV11a Handleiding

21 November 2024
AOpen

AOpen QF13 Handleiding

21 November 2024
AOpen

AOpen QF16ATV Handleiding

21 November 2024
AOpen

AOpen QF18s Handleiding

21 November 2024
AOpen

AOpen QH15s Handleiding

21 November 2024