Amprobe ACD-14 TRMS-PLUS Handleiding

Amprobe Niet gecategoriseerd ACD-14 TRMS-PLUS

Lees hieronder de đź“– handleiding in het Nederlandse voor Amprobe ACD-14 TRMS-PLUS (146 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 254 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/146
Users Manual
• Bedienungshandbuch
• Mode d’emploi
• Manuale d’Uso
• Manual de uso
• Användarhanbok
ACD-14 PLUS
ACD-14 TRMS-PLUS
Clamp-on Multimeter
With Dual Display
ACD-14 PLUS
ACD-14 TRMS-PLUS
Clamp-on Multimeter With Dual Display
Users Manual
2
Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material and workmanship for 1
year from the date of purchase. This warranty does not cover fuses, disposable batteries
or damage from accident, neglect, misuse, alteration, contamination, or abnormal
conditions of operation or handling. Resellers are not authorized to extend any other
warranty on Amprobe’s behalf. To obtain service during the warranty period, return the
product with proof of purchase to an authorized Amprobe Test Tools Service Center or
to an Amprobe dealer or distributor. See Repair Section for details. THIS WARRANTY
IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR
STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE
OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not
allow the exclusion or limitation of an implied warranty or of incidental or consequential
damages, this limitation of liability may not apply to you.
Repair
All test tools returned for warranty or non-warranty repair or for calibration should be
accompanied by the following: your name, company’s name, address, telephone number,
and proof of purchase. Additionally, please include a brief description of the problem or
the service requested and include the test leads with the meter. Non-warranty repair or
replacement charges should be remitted in the form of a check, a money order, credit
card with expiration date, or a purchase order made payable to Amprobe® Test Tools.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before requesting repair.
During the warranty period any defective test tool can be returned to your Amprobe®
Test Tools distributor for an exchange for the same or like product. Please check the
“Where to Buy” section on www.Amprobe.com for a list of distributors near you.
Additionally, in the United States and Canada In-Warranty repair and replacement units
can also be sent to a Amprobe® Test Tools Service Center (see next page for address).
Non-Warranty Repairs and Replacement – US and Canada
Non-warranty repairs in the United States and Canada should be sent to a Amprobe®
Test Tools Service Center. Call Amprobe® Test Tools or inquire at your point of purchase
for current repair and replacement rates.
In USA In Canada
Amprobe Test Tools Amprobe Test Tools
Everett, WA 98203 Mississauga, ON L4Z 1X9
Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600
Fax: 425-446-6390 Fax: 905-890-6866
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe® Test Tools distributor
for a nominal charge. Please check the “Where to Buy” section on www.Amprobe.com
for a list of distributors near you.
European Correspondence Address*
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
*(Correspondence only – no repair or replacement available from this address. European
customers please contact your distributor.)
5
when the fuse blows in a circuit with open circuit voltage >1000 V // servicing CRT
equipment.
• Remove test leads before opening the case to change the battery.
• Disconnect circuit power and discharge all high-voltage capacitors before testing
resistance,continuity, diodes, or capacitance.
• To avoid false readings, which could lead to possible electric shock or personal
injury, replace the batteries as soon as the low battery indicator ( ) appears.
Unpacking and Inspection
Your shipping carton should include:
1 Digital clamp meter
1 Carrying case
1 Test lead set (one black, one red)
1 Two coin cell batteries
1 Manual
If any of the items are damaged or missing, return the complete package to the place of
purchase for an exchange.
OPERATION
CAUTION
The Hz button will alternate the display between the voltage function selected and
frequency reading.
Measuring DC Voltage - See Figure 1
1. Set the Function Switch to .V
2. Connect the test leads: Red to Black to +, COM.
3. Connect the test probes to the circuit test points.
4. Read the display, and if necessary, correct any overload conditions.(0L)
Measuring AC Voltage - See Figure 2
1. Set the Function Switch to .V
2. Connect the test leads: Red to Black to +, COM.
3. Connect the test probes to the circuit test points.
4. Read the display, and if necessary, correct any overload conditions.(0L)
14
Audible Continuity Tester
Audible indication: between 10 and 120 .Ω Ω
Transient protection: 6.5 kV (1.2/50 ÎĽs surge)
Diode Tester / Open Circuit Voltage Test Current
(Typical) < 1.6 VDC @ 0.25 mA
Transient protection: 6.5 kV (1.2/50 ÎĽs surge)
Max Hold* (where applicable)
Specied accuracy ± 50 digits for changes > 25 ms in duration
20
MAX 600A
MAX
HOLD
ON
OFF
SELECT
MAX
COM
A
Hz
ACD-14 PLUS
!
!
A
600V CAT III
℉
Black Red
SELECT
Testing Diodes
Figure 6
23
MAX 600A
MAX
HOLD
ON
OFF
SELECT
MAX
COM
A
Hz
ACD-14 PLUS
!
!
A
600V CAT III
℉
Black
X
Red
Measuring
ÎĽA Current
Figure 9
2
Limites de garantie et de responsabilité
Amprobe garantit l’absence de vices de matériaux et de fabrication de ce produit dans des
conditions normales d’utilisation et d’entretien pendant une période d’un an prenant effet à la
date d’achat. Cette garantie ne s’applique pas aux fusibles, aux piles jetables ni à tout produit
mal utilisé, modié, contaminé, négligé ou endommagé par accident ou soumis à des conditions
anormales d’utilisation et de manipulation. Les revendeurs n’ont pas l’autorisation de prolonger
toute autre garantie au nom d’Amprobe. Pour bénécier de la garantie, renvoyez le produit
accompagné d’un justicatif d’achat auprès d’un centre de services agréé par Amprobe Test
Tools, d’un distributeur ou d’un revendeur Amprobe. Voir la section Réparation pour tous les
détails. LA PRESENTE GARANTIE EST LE SEUL ET EXCLUSIF RECOURS DE L’UTILISATEUR TOUTES
AUTRES GARANTIES, EXPLICITES, IMPLICITES OU STATUTAIRES, NOTAMMENT LES GARANTIES
DE QUALITE MARCHANDE OU D’ADAPTATION A UN OBJECTIF PARTICULIER SONT EXCLUES PAR
LES PRESENTES. LE FABRICANT NE SERA EN AUCUN CAS TENU RESPONSABLE DE DOMMAGES
PARTICULIERS, INDIRECTS, ACCIDENTELS OU CONSECUTIFS, NI D’AUCUNS DEGATS OU PERTES DE
DONNEES, SUR UNE BASE CONTRACTUELLE, EXTRA-CONTRACTUELLE OU AUTRE. Etant donné
que certaines juridictions n’admettent pas les limitations d’une condition de garantie implicite
ou l’exclusion ou la limitation de dégâts accidentels ou consécutifs, il se peut que les limitations
et les exclusions de cette garantie ne s’appliquent pas à votre cas.
RĂ©paration
Tous les outils de test renvoyés pour un étalonnage ou une réparation couverte ou non par la
garantie doivent être accompagnés des éléments suivants : nom, raison sociale, adresse, numéro
de téléphone et justicatif d’achat. Ajoutez également une brève description du problème ou
du service demandé et incluez les cordons de test avec l’appareil. Les frais de remplacement ou
de réparation hors garantie doivent être acquittés par chèque, mandat, carte de crédit avec date
d’expiration, ou par bon de commande payable à l’ordre d’Amprobe ® Test Tools.
Remplacements et réparations sous garantie – Tous pays
Veuillez lire la déclaration de garantie et vériez la pile avant de demander une réparation.
Pendant la période de garantie, tout outil de test défectueux peut être renvoyé auprès de votre
distributeur Amprobe ® Test Tools pour être échangé contre un produit identique ou similaire.
Consultez la section « Where to Buy » sur le site www.Amprobe.com pour obtenir la liste des
distributeurs dans votre région. Au Canada et aux Etats-Unis, les appareils devant être remplacés
ou réparés sous garantie peuvent également être envoyés dans un centre de services
Amprobe ® Test Tools (voir page suivante pour les adresses).
Remplacements et réparations hors garantie – Canada et Etats-Unis
Les appareils à réparer hors garantie au Canada et aux Etats-Unis doivent être envoyés dans un
centre de services Amprobe ® Test Tools. Appelez Amprobe ® Test Tools ou renseignez-vous auprès
de votre lieu d’achat pour connaître les tarifs en vigueur de remplacement ou de réparation.
Aux Etats-Unis Au Canada
Amprobe Test Tools Amprobe Test Tools
Everett, WA 98203 Mississauga, Ontario L4Z 1X9
TĂ©l. : 877-AMPROBE (267-7623) TĂ©l. : 905-890-7600
Fax : 425-446-6390 Fax : 905-890-6866
Remplacements et réparations hors garantie – Europe
Les appareils européens non couverts par la garantie peuvent être remplacés par votre
distributeur Amprobe ® Test Tools pour une somme nominale. Consultez la section
« Where to Buy » sur le site www.Amprobe.com pour obtenir la liste des distributeurs dans
votre région.
Adresse postale européenne*
Amprobe ® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germania
TĂ©l. : +49 (0) 7684 8009 - 0
*(Réservée à la correspondance – Aucune réparation ou remplacement n’est possible à cette
adresse. Nos clients européens doivent contacter leur distributeur.)


Product specificaties

Merk: Amprobe
Categorie: Niet gecategoriseerd
Model: ACD-14 TRMS-PLUS

Heb je hulp nodig?

Als je hulp nodig hebt met Amprobe ACD-14 TRMS-PLUS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Amprobe

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd