AmpliVox S1230 Handleiding

AmpliVox Speaker S1230

Lees hieronder de 📖 handleiding in het Nederlandse voor AmpliVox S1230 (7 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

User Guide

S1230 / SS1230 / SW1230

Mity Box Passive / Amplified / Wireless Speaker

Thank you for choosing the S1230 / SS1230 / SW1230 Mity

Box Speaker from AmpliVox Portable Sound Systems.

We are excited in introducing this truly unique system. Our

system combines flexibility with functionality. Please refer to

this user guide as you enjoy the unique capabilities of anoth-

er quality product from AmpliVox Portable Sound Systems.

We encourage you to visit our website www.ampli.com to

receive our newsletter, download our catalog, and learn

more about the complete line of audio visual prod-AmpliVox

ucts, including portable PA systems, and lecterns.

AmpliVox 650 Anthony Trail Suite D, Northbrook, IL 60062 Phone: (800)267-• • 5486 • Fax: (800)267-5489 www.ampli.com

TABLE OF CONTENTS

SPECIFICATIONS …………………......................................2

TROUBLESHOOTING..........................................................3

SPEAKER BRACKET…………………................................. 3

FEATURE LAYOUT…………………... ................................ 4

FEATURES………... ........................................................... 5

WIRELESS MICROPHONE SET UP................................... 5-

WIRELESS HANDHELD MICROPHONE............................. 6

WARRANTY…………………………………………...………. 7

IMPORTANT SAFETY INSTRUCTIONS

Before using this product, read the instruction manual for important safety information. Please retain this manual for

future reference and warranty information.

Troubleshooting & Servicing

Do not attempt to service or repair the device yourself. Refer all servicing to qualified service personnel. Do not at-

tempt to modify the device in anyway. Doing so could invalidate your warranty.

Cleaning

When cleaning the device, please use a soft, dry cloth. Never use benzene, paint thinner, or other chemicals on the -

device.

Location

Place the device in stable location, so it will not fall causing damage to the device or bodily harm.

Intended use

The product may only be used with the original parts intended for it. The intended use includes adherence to the speci-

fied installation instructions. The manufacturer accepts no liability for damage arising due to improper use.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

IMPORTANT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ-

ing interference that may cause undesired operation.

The unit’s circuitry may cause interference to nearby radios. To prevent interference, either switch the unit off or move

away from the affected radio.

NOTE: This equipment complies within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele-

vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio / TV technician for help.

NOTE: Shielded cables may be required to be used with this unit to en sure compliance with the Class B FCC limits.-

SPECIFICATIONS

Enclosure: Sealed Type / Rotational Molded

Rated Power Output: 50 W Dynamic

Speaker Type: 4 ohm, 6 x 8 inch, full range, cone type

AC Power: - 110 220 Auto sensing, 50/60 Hz

Wireless Range: Up to 300 Feet

UHF Wireless Frequency: 584 608 MHz-

Frequency Response: 50Hz to 20Khz

Weight: 4.5 lbs.

Dimensions (HWD ): 10 .5 in. H x 7 in. W x 6.5 in. D

Mounting Speaker Bracket

 Slots have been provided on mounting bracket that will

accommodate 10 24 machine screws or wood screws -

(not provided).

 Make sure that mounting surface will hold weight of

speaker.

Mounting Speaker to Bracket

 Locate the two speaker mounting knobs and washers.

 Insert one washer over stud of knob and screw part way

into the insert on the side of speaker. Repeat for other

side.

 Take speaker and align these two knobs with the slots in

the bracket.

 Position washer so that it is in between the bracket and -

bottom of knob.

 Slide into slot, position, and tighten both knobs.

SPEAKER BRACKET

UNIT WILL NOT TURN ON

 Is unit plugged in?

SOUND IS DISTORTED

 Turn down main volume

 Turn down input source since the output of some devices may be too high

SOUND IS MUFFLED

 Bass too high

FEEDBACK: ALOUD SQUEALING, SHRILL OR HOWLING SOUND THAT IS SELF GENERATED

 Feedback occurs when a microphone is too close to the speaker or the microphone volume is too high, or the microphone is

pointed towards the speaker. It is also caused by sound reflecting off hard surfaces.

 Reduce or eliminate Feedback by

- Pointing the microphone in a different direction

- Keeping the microphone BEHIND the speakers

- Turn down the volume levels

POWER IS ON, BUT NO SOUND

 Check volume levels

 If using wireless, be sure receiver(s) and/or transmitter battery is installed and/or is on

WIRELESS MICROPHONE SIGNAL IS WEAK

 If microphone has batteries, check batteries

 Check cables/connectors

WIRELESS MIC DOES NOT WORK

 Check transmitter battery is alkaline and ensure transmitter is on.

 Does green “signal” LED light when transmitter is turned on?

 Are the transmitter and receiver on the same channel? (1-16)

WIRELESS MIC CUTS IN AND OUT

 Is unit visible (line of sight) from user? If not, move unit into view when using wireless microphone.

 Does the green “signal” LED go out when signal drops out? Check battery in transmitter.

TROUBLESHOOTING GUIDE

NEED HELP? Call 800- - 267 5486

Product specificaties

Merk:	AmpliVox
Categorie:	Speaker
Model:	S1230
Kleur van het product:	Zwart
Gewicht:	2041.17 g
Breedte:	254 mm
Diepte:	152 mm
Hoogte:	177.8 mm
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	50 W
Equalizer-instellingen:	Nee
Impedantie:	4 Ohm
Geschikt voor buitengebruik:	Ja
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Floor, Tabletop/bookshelf
Woofer:	Nee
Frequentiebereik:	50 - 20000 Hz
Versterker:	Nee
Tweeter:	Nee