American DJ VF Snow Flurry HO Handleiding

American DJ Sneeuwblazer VF Snow Flurry HO

Lees hieronder de 📖 handleiding in het Nederlandse voor American DJ VF Snow Flurry HO (6 pagina's) in de categorie Sneeuwblazer. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

User Instructions

6/15

VF SNOW FLURRY HO

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

• Be sure to save the packing carton in the unlikely event the unit

may have to be returned for service

• Do not spill water or other liquids into or on to your snow machine.

Be sure that all the snow uid is kept inside the uid reservoir

• Be sure that the local power outlet match that or the required

voltage for your snow machine

• Do not remove the top cover under any conditions. There are no

user serviceable parts inside

• Disconnect the unit’s main power when left unused for long peri-

ods of time

• Never connect this unit to a dimmer pack

• Do not attempt to operate this unit, if it becomes damaged in anyway

• Never operate this unit when it’s cover is removed

• To reduce the risk of electrical shock or re, do not expose this

unit rain or moisture

• Do not attempt to operate this unit if the power cord has been fray-

ed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the

risk of electrical shock and re in case of an internal short

• Disconnect from main power before making any type of connection

• Never block the ventilation holes. Always be sure to mount this

unit in an area that will allow proper ventilation. Allow about 6”

(15cm) between this device and a wall

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties

• Always mount this unit in a safe and stable matter

• Please route your power cord out of the way of foot trac. Power

cords should be routed so they are not likely to be walked on,

pinched by items placed upon or against them

• The unit should only be serviced by qualified service personnel

when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The appliance does not appear to operate normally or

exhibits a marked change in performance.

VF Snow Flurry HO Safety Precautions

ADJ Products, LLC - VF Snow Flurry HO Instruction Manual Page 2 ADJ Products, LLC - VF Snow Flurry HO Instruction Manual Page 3

Introduction: Congratulations, you have just purchased the VF Snow

Flurry HO snow machine. The VF Snow Flurry HO snow machine has

been designed to perform reliably for years when the guidelines in this

booklet are followed. Please read and understand the instructions in

this manual carefully and thoroughly before attempting to operate this

unit. These instructions contain important information regarding safety

during use and maintenance.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question

should you encounter problems during your set up or initial operation.

You may also visit us on the web at www.adj.com for any comments or

suggestions. For service related issue please contact ADJ Products,

LLC. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

Do not discard the shipping cartoon in the trash. Please recycle when

ever possible.

VF Snow Flurry HO Introduction

Please Note: Specications and improvements in the design of

this unit and this manual are subject to change without any prior

written notice.

ADJ Products, LLC - VF Snow Flurry HO Instruction Manual Page 4 ADJ Products, LLC - VF Snow Flurry HO Instruction Manual Page 5

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your ADJ VF Snow

Flurry HO. The VF Snow Flurry HO is available in a 120v and 220v ver-

sion. Because line voltage may vary from venue to venue, you should

be sure your unit voltages matches the wall outlet voltage before

attempting to operate you xture.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX

fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models

of dierent manufactures to be linked together and operate from a

single controller, as long as all xtures and the controller are DMX

compliant. To ensure proper DMX data transmission, when using

several DMX fixtures try to use the shortest cable path possible. The

order in which fixtures are connected in a DMX line does not influence

the DMX addressing. For example; a fixture assigned a DMX address

of 1 may be placed anywhere in a DMX line, at the beginning, at the

end, or anywhere in the middle. Therefore, the first fixture controlled

by the controller could be the last fixture in the chain. When a fixture

is assigned a DMX address of 1, the DMX controller knows to send

DATA assigned to address 1 to that unit, no matter where it is located

in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave

Operation): The VF Snow Flurry HO can be con-

trolled via DMX-512 protocol. The VF Snow Flurry

HO 1 channel DMX unit. The DMX address is set

using the dipswitches on the rear panel of the

unit. Your unit and your DMX controller require a

approved DMX-512 110 Ohm Data cable for data

input and data output (Figure 1). We recommend

Accu-Cable DMX cables. If you are making your

own cables, be sure to use standard 110-120 Ohm Figure 1

VF Snow Flurry HO DMX Set-Up

DMX512 IN

3-PIN XLR

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

Termination educes signalr errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture. Figure 4

shielded cable (This cable may be purchased at almost all professional

sound and lighting stores). Your cables should be made with a male

and female XLR connector on either end of the cable. Also remember

that DMX cable must be daisy chained and cannot be split.

VF Snow Flurry HO DMX Set-Up

Product specificaties

Merk:	American DJ
Categorie:	Sneeuwblazer
Model:	VF Snow Flurry HO

Heb je hulp nodig?

Als je hulp nodig hebt met American DJ VF Snow Flurry HO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Sneeuwblazer American DJ

American DJ VF Snow Flurry HO Handleiding

19 Mei 2023

Handleiding Sneeuwblazer

Nieuwste handleidingen voor Sneeuwblazer

Hurricane Snow Schuffel Handleiding

16 November 2024

Gude GESF 260 Handleiding

15 November 2024

NAC JZ7818 Handleiding

5 November 2024

Anova QN156T Handleiding

5 September 2024

Ryobi RY40809 Handleiding

22 Augustus 2024

Worx WG471E Handleiding

4 Mei 2024

Snow Joe 24V-SS13.5-XR Handleiding

27 Februari 2024

Honda HSS760A Handleiding

21 Februari 2024

Honda HSS 760A T Handleiding

21 Februari 2024

Troy-Bilt Arctic Storm 34 Handleiding

31 Januari 2024