American DJ Saber Spot RGBW Handleiding

American DJ Verlichting Saber Spot RGBW

Lees hieronder de 📖 handleiding in het Nederlandse voor American DJ Saber Spot RGBW (18 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

User Instructions

09/20

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

SABER SPOT RGBW

4 0 1 0 7 6 5

ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 3ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 2

• DMX-512 Protocol Compatible (12 DMX Channel Modes:

3/4/4/5/6/6/7/8/8/9/11/12

• 3 Operating Modes - Show Mode, RGBW Dimmer Mode & DMX

Control

• 5 Dimmer Curves (Standard, Stage, TV, Architectural, & Theatre)

• Digital Display for Address and Function Setting

• UC IR Compatible (Not Included) & Airstream App Compatible

• Power Cord Daisy Chainable (See page 34)

Saber Spot RGBW Features

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures

warranty. In the unlikely event your unit may require service please

contact ADJ Products, LLC.

During operation the housing may become extremely hot. Avoid

touching the unit with bare hands while in use.

ADJ Products, LLC will not accept any liability for any resulting dam-

ages caused by the non-observance of this manual or any unauthor-

ized modication to this unit.

Saber Spot RGBW Handling Precautions

Saber Spot RGBW Warranty Registration

The Saber Spot RGBW 2 year (730 days) limited warranty. carries a

Please fill out the enclosed warranty card to validate your purchase

and warranty. You may also register your product online at www. adj-

products.com. All returned service items whether under warranty or

not, must be freight pre-paid and accompany a return authorization

(R.A.) umber. If the unit is under warranty you must provide an copy

of your proof of purchase invoice. Please contact ADJ Products, LLC

customer support for a R.A. number.

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

Saber Spot RGBW General Instructions Saber Spot RGBW General Information

Unpacking: Thank you for purchasing the Saber Spot RGBW by

ADJ Products, LLC. Every Saber Spot RGBW has been thoroughly

tested and has been shipped in perfect operating condition. Carefully

check the shipping carton for damage that may have occurred during

shipping. If the carton appears to be damaged, carefully inspect your

xture for any damage and be sure all equipment necessary to oper-

ate the unit has arrived intact. In the event damage has been found

or parts are missing, please contact our toll free customer support

number for further instructions. Please do not return this unit to your

dealer without contacting customer support rst.

Introduction: The Saber Spot RGBW is a DMX intelligent LED fix-

ture. The Saber Spot RGBW can operate as a fixture or stand alone

in a Primary/Secondary set up The Saber Spot RGBW has three .

operating modes; RGBW dimmer mode, show mode, & DMX

controlled fixture is suitable for theaters, studios, retail stores, . This

and other similar locations. For best results use fog or special effects

smoke to enhance the beams projections.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or

suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Warning! This may cause severe eye damage. Avoid looking directly

into the light source at all times!

For Your Own Personal Safety, Please Read and Understand This

Manual Completely Before You Attempt To Install Or Operate

This Unit!

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken.

• Do not attempt to remove or break o the ground prong from

the electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience recep-

tacles, and the point where they exit from the appliance.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 33 for cleaning details.

• Heat -This fixture should be situated away from heat sources such

as radiators, heat registers, stoves, or other appliances (including

amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. Objects have fallen, or liquid has been spilled into the appliance.

B. The appliance has been exposed to rain or water.

C. The appliance does not appear to operate normally or exhibits

a marked change in performance.

Saber Spot RGBW Safety Precautions

ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 5ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 4

Power Supply: The ADJ Saber Spot RGBW contains a automatic

voltage switch, which will auto sense the voltage when it is plugged

into the power source. With this switch there is no need to worry about

the correct power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the D A “IN” and D A “OUT” XLR terminals located on all DMX AT AT

fixtures (most controllers only have a D A “OUT” terminal). AT

DMX Linking: DMX is a language allowing all makes and models

of dierent manufactures to be linked together and operate from a

single controlle r, as long as all xtures and the controller are DMX

compliant. To ensure proper DMX data transmission, when using

several DMX fixtures try to use the shortest cable path possible. The

order in which fixtures are connected in a DMX line does not influence

the DMX addressing. For example; a fixture assigned a DMX address

of 1 may be placed anywhere in a DMX line, at the beginning, at the

end, or anywhere in the middle. Therefore, the first fixture controlled

by the controller could be the last fixture in the chain. When a fixture

is assigned a DMX address of 1, the DMX controller knows to send

DATA assigned to address 1 to that unit, no matter where it is located

in the DMX chain.

Data Cable (DMX Cable) Requirements For DMX : The Saber Spot

RGBW can be controlled via DMX-512 protocol. The Saber Spot

RGBW has 12 DMX channel modes. The

DMX address is set electronically using the con-

trols on the rear panel of the unit. Your unit and

your DMX controller require a approved DMX-512

110 Ohm Data cable for data input and data output

(Figure 1). We recommend Accu-Cable DMX cables.

If you are making your own cables, be sure to use

standard 110-120 Ohm shielded cable (This cable

may be purchased at almost all professional sound

and lighting stores). Your cables should be made

Saber Spot RGBW DMX Set Up

Figure 1

Product specificaties

Merk:	American DJ
Categorie:	Verlichting
Model:	Saber Spot RGBW

Heb je hulp nodig?

Als je hulp nodig hebt met American DJ Saber Spot RGBW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Verlichting American DJ

American DJ Pixie Strip 120 Handleiding

29 Maart 2025

American DJ Saber Spot RGBW Handleiding

29 Maart 2025

American DJ Hydro Wash X19 Handleiding

29 Maart 2025

American DJ RDM XS8 Handleiding

27 Januari 2025

American DJ FS3000LED Handleiding

27 Januari 2025

American DJ ENCORE LB15IP Handleiding

18 December 2024

American DJ ENCORE LP12IP Handleiding

18 December 2024

American DJ RGBW4C IR Handleiding

15 November 2024

American DJ MyDMX5 Handleiding

8 April 2024

American DJ SDC24 Handleiding

18 Maart 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Maginon TL-380W Handleiding

1 April 2025

DCW FOCUS X5 Handleiding

31 Maart 2025

DCW AARO Wall Handleiding

31 Maart 2025

Rollei LUX 100 Bi-Color Handleiding

30 Maart 2025

Rollei LUMIS Mini RGB Handleiding

30 Maart 2025

Rollei LUMIS Key Light Pro Handleiding

30 Maart 2025

Rollei LUX Compact RGB Handleiding

30 Maart 2025

Yongnuo YNRAY260 Handleiding

30 Maart 2025

NEO Tools 99-113 Handleiding

28 Maart 2025

Godox Litemons LP1200R Handleiding

27 Maart 2025