American DJ Quad Gem DMX Handleiding

American DJ Verlichting Quad Gem DMX

Lees hieronder de 📖 handleiding in het Nederlandse voor American DJ Quad Gem DMX (8 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

American DJ ®

6122 S. Eastern Ave.

Los Angeles CA. 90040

www.americandj.com

Rev. 5/09

User Instructions

American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 2®

Unpacking: Thank you for purchasing the Quad Gem DMX™ by

American DJ . Every Quad Gem DMX™ has been thoroughly tested ®

and has been shipped in perfect operating condition. Carefully check

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your x-

ture for any damage and be sure all equipment necessary to operate

the unit has arrived intact. In the event damage has been found or parts

are missing, please contact our toll free customer support number for

further instructions. Please do not return this unit to your dealer with-

out contacting customer support rst.

Introduction: The Quad Gem DMX™ is a DMX intelligent LED fixture.

When using DMX mode you can choose between a four channle mode

and a 10 channel mode. The fixture can operate in three different oper-

ating modes; stand alone, sound-active, or in a Master/Slave configu-

ration. The Quad Gem DMX™ comes with several built in programs.

When used as a stand alone unit or when used in multiples linked in a

master/slave configuration. For best results use fog or special effects

smoke to enhance the beams projections.

Customer Support: American DJ provides a toll free customer ®

support line, to provide help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 9:00 a.m. to

5:00 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Warning! This may cause severe eye damage. Avoid looking directly

into the light source at all times!

Quad Gem DMX™ General Information

For Your Own Personal Safety, Please Read and Understand This

Manual Completely Before You Attempt To Install Or Operate

This Unit!

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken.

• Do not attempt to remove or break off the ground prong from

the electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience recep-

tacles, and the point where they exit from the appliance.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 14 for cleaning details.

• Heat -This fixture should be situated away from heat sources such

as radiators, heat registers, stoves, or other appliances (including

amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. Objects have fallen, or liquid has been spilled into the appliance.

B. The appliance has been exposed to rain or water.

C. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Quad Gem DMX™ Safety Precautions

American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 4American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 3 ®®

• DMX-512 Protocol Compatible (Four or Seven DMX Channels)

• RGB + White

• 3 Operating Modes - Master/Slave; Stand Alone; Sound Active

• Internal Microphone

• Digital Display for Address and Function Setting

• UC3 Controller (Not Included)

• 12 Sound Active Shows

• Power Cord Daisy Chain

Quad Gem DMX™ Features

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ .®

American DJ will not accept any liability for any resulting damages ®

caused by the non-observance of this manual or any unauthorized

modication to this unit.

Quad Gem DMX™ Handling Precautions

Quad Gem DMX™ Warranty Registration

The Quad Gem DMX™ carries a 3 year (1095 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase

and warranty. You may also register your product online at www.

americandj.com. All returned service items whether under warranty or

not, must be freight pre-paid and accompany a return authorization

(R.A.) number. If the unit is under warranty you must provide a copy

of your proof of purchase invoice. Please contact American DJ® cus-

tomer support for a R.A. number.

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

Quad Gem DMX™ General Instructions

American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 6American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 5 ®®

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your American DJ ®

Quad Gem DMX.™ The American DJ Quad Gem DMX®™ is available

in a 120v and 220v version. Because line voltage may vary from venue

to venue, you should be sure your unit voltage matches the wall outlet

voltage before attempting to operate you xture. Also be sure to only

use the included I.E.C. power cable supplied with the unit, this cable

matches the voltage and current requirements of the unit.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX

fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models

of different manufactures to be linked together and operate from a

single controller, as long as all xtures and the controller are DMX

compliant. To ensure proper DMX data transmission, when using

several DMX fixtures try to use the shortest cable path possible. The

order in which fixtures are connected in a DMX line does not influence

the DMX addressing. For example; a fixture assigned a DMX address

of 1 may be placed anywhere in a DMX line, at the beginning, at the

end, or anywhere in the middle. Therefore, the first fixture controlled

by the controller could be the last fixture in the chain. When a fixture

is assigned a DMX address of 1, the DMX controller knows to send

DATA assigned to address 1 to that unit, no matter where it is located

in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX

and Master/Slave Operation): The Quad Gem

DMX™ can be controlled via DMX-512 protocol.

The Quad Gem DMX™ can be a four or seven

channel DMX unit. The DMX address is set elec-

tronically using the controls on the side panel of

the unit. Your unit and your DMX controller require

a standard 3-pin XLR connector for data input and

data output (Figure 1). If you are making your own cables, be sure

Quad Gem DMX™ Set Up

Figure 1

to use standard two conductor shielded cable (This cable may be

purchased at almost all professional sound and lighting stores). Your

cables should be made with a male and female XLR connector on

either end of the cable. Also remember that DMX cable must be daisy

chained and cannot be split.

Quad Gem DMX™ Set Up

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

DMX512 IN

3-PIN XLR

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

Termination reduces si gnal errors and

avoi ds s igna l transmission problem s

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and P IN 3 (DMX +) of the last fixture.

Figure 4

Product specificaties

Merk:	American DJ
Categorie:	Verlichting
Model:	Quad Gem DMX

Heb je hulp nodig?

Als je hulp nodig hebt met American DJ Quad Gem DMX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Verlichting American DJ

American DJ RGBW4C IR Handleiding

15 November 2024

American DJ MyDMX5 Handleiding

8 April 2024

American DJ SDC24 Handleiding

18 Maart 2024

American DJ UV Flood 36 Handleiding

7 Mei 2023

American DJ Freq 5 Handleiding

6 Mei 2023

American DJ S-81 LED Handleiding

20 April 2023

American DJ Pocket Pro Handleiding

17 April 2023

American DJ myDMX 3.0 Handleiding

28 Maart 2023

American DJ Eco UV Bar DMX Handleiding

27 Maart 2023

American DJ SP4LED Handleiding

13 Maart 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Livarno Lux IAN 107127 Handleiding

17 November 2024

Livarno Lux IAN 104775 Handleiding

17 November 2024

Livarno Lux IAN 282451 Handleiding

17 November 2024

Livarno Lux IAN 97740 Handleiding

17 November 2024

Livarno Lux IAN 88651 Handleiding

17 November 2024

Livarno Lux IAN 279394 Handleiding

17 November 2024

Livarno Lux IAN 279399 Handleiding

17 November 2024

Livarno Lux IAN 273025 Handleiding

17 November 2024

Livarno Lux IAN 106820 Handleiding

17 November 2024

Livarno Lux IAN 278008 Handleiding

17 November 2024