American DJ Flat Par QWH12X Handleiding

American DJ Verlichting Flat Par QWH12X

Lees hieronder de 📖 handleiding in het Nederlandse voor American DJ Flat Par QWH12X (12 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

User Instructions

Flat Par QWH12X Introduction

3/12

Unpacking: Thank you for purchasing the Flat Par QWH12X by Amer-

ican DJ®. Every Flat Par QWH12X has been thoroughly tested and has

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all accessories necessary to operate the unit has

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Do not return this unit to your dealer without rst contact-

ing customer support.

Introduction: The America -n DJ® Flat Par QWH12X is part of a con

tinuing pursuit to create high quality intelligent lighting. The Flat Par

QWH12X is a DMX intelligent, high powered LED par fixture. This x-

ture can be used in a stand alone mode or connected in a Master/

Slave conguration. This wash has five operating modes: Sound Active

mode, Auto mode, RGBW mode, Static Color mode and DMX control

mode.

Customer Support: American DJ provides a customer support line,

to provide set up help and to answer any question should you encoun-

ter problems during your set up or initial operation. You may also visit

us on the web at www.American DJ.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@AmericanDJ.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ.

PLEASE recycle the shipping carton when ever possible.

FLAT PAR QWH12X

Flat Par QWH12X Safety Precautions

• Mulit-Colors

• Five Operating Modes

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• 8 DMX Modes: 1 Channel Mode, 2 Channel Mode, 3 Channel

Mode, 4 Channel Mode, 5 Channel Mode, 6 Channel Mode, 7

Channel Mode, and 8 Channel Mode.

• ADJ LED RC 2 compatiable (Not Included)

• Power Cord Daisy Chain (See page 11)

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 21 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Flat Par QWH12X Warranty Registration

Flat Par QWH12X Features

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations

of this unit. These instructions contain important safety information

regarding the use and maintenance of this unit. Please keep this manual

with the unit, for future reference.

Flat Par QWH12X General Instructions

The 3 Flat Par QWH12X carries a year limited warranty. Please fill out

the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

P -ower Supply: The American DJ Flat Par QWH12X contains a auto

matic voltage switch, which will auto sense the voltage when it is

plugged into the power source. With this switch there is no need to

worry about the correct power voltage, this unit can be plugged in

anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Flat Par QA12 can be controlled via DMX-512 protocol. The Flat

Par QA12 has 8 DMX channel modes, please see pages 9-10 for the

dierent DMX modes. The DMX address is set on the back panel of the

Flat Par QWH12X. Your unit and your DMX controller require a stan-

dard 3-pin XLR connector for data input and data

output (Figure 1). We recommend Accu-Cable

DMX cables. If you are making your own cables,

be sure to use standard 110-120 Ohm shielded

cable (This cable may be purchased at almost all

pro lighting stores). Your cables should be made

with a male and female XLR connector on either

end of the cable. Also remember that DMX cable

must be daisy chained and cannot be split.

Flat Par QWH12X Set Up

Figure 1

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

Flat Par QWH12X Set Up

DMX512 IN

3-PIN XLR

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket

XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

Termination educes signalr errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture. Figure 4

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin DMX-

512 data cables for DATA transmission in place of 3-pin. 5-pin DMX

xtures may be implemented in a 3-pin DMX line. When inserting stan-

dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,

these adaptors are readily available at most electric stores. The chart

below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

Product specificaties

Merk:	American DJ
Categorie:	Verlichting
Model:	Flat Par QWH12X

Heb je hulp nodig?

Als je hulp nodig hebt met American DJ Flat Par QWH12X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Verlichting American DJ

American DJ RGBW4C IR Handleiding

15 November 2024

American DJ MyDMX5 Handleiding

8 April 2024

American DJ SDC24 Handleiding

18 Maart 2024

American DJ UV Flood 36 Handleiding

7 Mei 2023

American DJ Freq 5 Handleiding

6 Mei 2023

American DJ S-81 LED Handleiding

20 April 2023

American DJ Pocket Pro Handleiding

17 April 2023

American DJ myDMX 3.0 Handleiding

28 Maart 2023

American DJ Eco UV Bar DMX Handleiding

27 Maart 2023

American DJ SP4LED Handleiding

13 Maart 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Livarno Lux IAN 107127 Handleiding

17 November 2024

Livarno Lux IAN 104775 Handleiding

17 November 2024

Livarno Lux IAN 282451 Handleiding

17 November 2024

Livarno Lux IAN 97740 Handleiding

17 November 2024

Livarno Lux IAN 88651 Handleiding

17 November 2024

Livarno Lux IAN 279394 Handleiding

17 November 2024

Livarno Lux IAN 279399 Handleiding

17 November 2024

Livarno Lux IAN 273025 Handleiding

17 November 2024

Livarno Lux IAN 106820 Handleiding

17 November 2024

Livarno Lux IAN 278008 Handleiding

17 November 2024