Amazfit Bip 3 Pro Handleiding

Amazfit Smartwatch Bip 3 Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Amazfit Bip 3 Pro (20 pagina's) in de categorie Smartwatch. Deze handleiding was nuttig voor 191 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

1/ 20

Amazfit Bip 3 Pro User Manual

Connection and pairing

Use your phone to scan the following QR code, and download and install the Zepp app. For a

better user experience, update the app to the latest version as prompted.

Note: The operating system of your mobile phone must be Android 7.0 or iOS 12.0, or later.

Initial pairing:

1. When the watch is started for the first time, the QR code used for pairing displays on the

screen.

2. Open the Zepp app on your phone, log in to the app, and scan the QR code on the watch to

pair your phone with the watch.

Pairing with a new phone:

1. Open the Zepp app on your old phone and synchronize data with the watch.

2. On the old mobile phone, go to Profile > Amazfit Bip 3 pro page and tap the Unpair button

at the bottom to unbind. If it is an iPhone, after unbinding, please unpair the phone and the

watch: go to the phone’s Bluetooth menu, find the Bluetooth name corresponding to the

watch, and tap the button on the far right of the Bluetooth name. After entering the page, tap

Ignore This Device.

3. Restore the factory settings of the watch. After the watch is rebooted, pair the watch with

your new phone as described in the initial pairing procedure.

Wearing and Charging

Wearing and Replacing Watch the Strap

2/ 20

It is recommended to wear the watch with comfortable looseness to allow the skin to breathe

and the sensor to function.

When measuring blood oxygen, avoid wearing the watch on the wrist joint, maintain a

comfortable (appropriately tight) fit between the watch and the skin of your wrist, and keep

your arm still throughout the measurement process. When affected by external factors (such

as arm sag, arm sway, arm hair, and tattoo), measurement results may be inaccurate or the

measurement may fail with no output.

You can tighten the watch strap during the workout and loosen it afterwards. Tighten the strap

appropriately if your watch sways on your wrist or fails to output data.

Charging

1. Connect the USB port of the watch charging base to a phone charger or a PC's USB

interface.

2. Put the watch onto the magnetic charging base and keep the metal contact on the back of

the watch aligned with the gold pin of the charging base. Ensure that the watch is firmly

attached to the charging base.

3. After the watch is correctly placed onto the charging base, the charging icon will appear on

the watch screen, indicating that charging is in progress.

3/ 20

Basic operations

Common Gesture Operations

Tap the screen

Uses a feature, selects the current item, or proceeds with the next

step

Press and hold the watch face

Activates watch face selection and watch face settings

Cover the screen

Turns off the screen

Swipe from left to right

On most sub-level pages, returns to the upper-level page

Swipe up or down on the

screen

Scrolls or switches pages

Physical button operations

Press the physical button once:

• When the screen is locked, press the physical button to unlock the screen.

• On the watch face screen, press the physical button to go to the app list.

• On screens other than the watch face screen, press the physical button to return to the

previous screen.

• On the Workout screen, press the physical button to swipe up and down between screens.

Press and hold the physical button:

• When the watch is in the power-off state, press and hold the button for 2 seconds to power

on the watch.

• On the watch face, press and hold the button for 1s to quick start a workout (to set quick

start app, go to Settings > Preference > Press and hold the button).

• On the Workout screen, press and hold the physical button to end the workout.

Product specificaties

Merk:	Amazfit
Categorie:	Smartwatch
Model:	Bip 3 Pro
Timer:	Ja
Gewicht:	33.2 g
Breedte:	44.12 mm
Diepte:	36.49 mm
Gebruikershandleiding:	Ja
Internationale veiligheidscode (IP):	IP68
Ondersteunde mobiele besturingssystemen:	Android 10,Android 10.0,Android 11.0,Android 12.0,Android 7.0,Android 7.1,Android 7.1.2,Android 8.0,Android 9.0,iOS 12,iOS 13,iOS 14,iOS 14.5,iOS 15
Oplaadtijd:	2 uur
Capaciteit van de accu/batterij:	280 mAh
Beeldschermdiagonaal:	1.69 "
Resolutie:	240 x 280 Pixels
Touchscreen:	Ja
Pixeldichtheid:	218 ppi
Versnellingsmeter:	Ja
Processormodel:	DA14697
RAM-capaciteit:	2 MB
Bluetooth-versie:	5.0
GPS:	Ja
GLONASS:	Ja
USB-poort:	Nee
Type aansluitplug:	Bluetooth
Near Field Communication (NFC):	Nee
Kleurnaam:	Crème
Nummerherkenning:	Ja
Markt positionering:	Smartwatch
Waterdicht:	Ja
Stopwatch:	Ja
Agenda:	Ja
Horlogekast materiaal:	Kunststof
Band materiaal:	Silicone
FM-radio:	Nee
Afgeronde schermhoeken:	Ja
Vorm:	Rechthoekig
Ingebouwde microfoon:	Nee
Bluetooth Low Energy (BLE):	Ja
Levensduur accu/batterij:	336 uur
Display technologie:	TFT
Ingebouwde camera:	Nee
Hartslagmeting:	Automatic,Manual
Band kleur:	Cream colour,Beige
Trillende motor:	Ja
Stappenteller:	Ja
Waterdichtheid:	5 ATM
Waterdicht tot:	50 m
Backlight:	Ja
Maat pols:	153 - 218 mm
Hartslag monitor:	Ja
Afgelegde afstand:	Ja
Persoonlijke doelen:	Ja
Slaapkwaliteit:	Ja
Sms-meldingen:	Ja
Processorfabrikant:	Dialog Semiconductor
Mobiele netwerkverbinding:	Nee
Voorgesteld geslacht:	Unisex
Sluitingtype:	Bandgesp met enkele pin
Dikte:	9.65 mm
Horlogekast kleur:	Crème
Horlogekast grootte:	44 mm
Flash memory:	0.016 GB
Type hartslagsensor:	Optisch
Slimme notificaties:	Ja
Multisport-modus:	Ja
Activiteitentracker:	Ja
Kalendermeldingen:	Ja
Band breedte:	20 mm
Trilalarmklok:	Ja
Hartslagcontactsensoren:	Ja
Bloedzuurstofsensor:	Ja
Magnetische oplaadconnector:	Ja
Oproepmeldingen:	Ja
Muziekbediening:	Ja
Maat band:	Een maat
Ondersteunde applicaties:	Zepp App
Wifi:	Nee
Batterijtechnologie:	Lithium-Polymeer (LiPo)
Type beeldscherm:	Digitaal
Type batterij:	Ingebouwde accu
Code geharmoniseerd systeem (HS):	91021200
Stressbewakingsfunctie:	Ja
Activiteitsmonitoring:	Ja
Externe audioweergave:	Ja
Intelligente ontwaking:	Ja