Amana PTH093J25AXXX Handleiding

Amana Airco PTH093J25AXXX

Lees hieronder de 📖 handleiding in het Nederlandse voor Amana PTH093J25AXXX (6 pagina's) in de categorie Airco. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
PACKAGE TERMINAL
AIR CONDITIONER/HEAT PUMP
Installation Instructions & Owner’s Manual
Standard and Remote Applications
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to know the
product better than the customer. This includes all safety
precautions and related items.
Prior to actual installation, thoroughly familiarize yourself
with this Instruction Manual. Pay special attention to all safety
warnings.
Often during installation or repair it is possible to place yourself
in a position which is more hazardous than when the unit is in
operation.
This manual must be left with the owner of the equipment.
19001 Kermier Road Waller, TX 77484 • www.amana-ptac.com
© 2022 Daikin Comfort Technologies Manufacturing, L.P.
is a registered trademark of Maytag Corporation or its related companies
and is used under license. All rights reserved.
IO-931A
11/2022
This equipment complies with FCC radiation exposure limits. To ensure
compliance, human proximity to the antenna shall not be less than
20 cm during normal operations.
ONLY PERSONNEL THAT HAVE BEEN TRAINED TO INSTALL,
ADJUST, SERVICE OR REPAIR(HEREINAFTER, SERVICE)
THE EQUIPMENT SPECIFIED IN THIS MANUAL SHOULD
SERVICE THE EQUIPMENT. THE MANUFACTURER WILL
NOT BE RESPONSIBLE FOR ANY INJURY OR PROPERTY
DAMAGE ARISING FROM IMPROPER SERVICE OR SERVICE
PROCEDURES. IF YOU SERVICE THIS UNIT, YOU ASSUME
RESPONSIBILITY FOR ANY INJURY OR PROPERTY DAMAGE
WHICH MAY RESULT. IN ADDITION, IN JURISDICTIONS
THAT REQUIRE ONE OR MORE LICENSES TO SERVICE
THE EQUIPMENT SPECIFIED IN THIS MANUAL, ONLY
LICENSED PERSONNEL SHOULD SERVICE THE EQUIPMENT.
IMPROPER INSTALLATION, ADJUSTMENT, SERVICING OR
REPAIR OF THE EQUIPMENT SPECIFIED IN THIS MANUAL,
OR ATTEMPTING TO INSTALL, ADJUST, SERVICE OR REPAIR
THE EQUIPMENT SPECIFIED IN THIS MANUAL WITHOUT
PROPER TRAINING MAY RESULT IN PRODUCT DAMAGE,
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
WARNING
This device, which was assembled by Daikin Comfort Technologies
Manufacturing, L.P., contains a component that is classied as an
intentional radiator. This intentional radiator has been certied by the
FCC: FCC ID TF7M90-1000. And this international radiator has an
Industry Canada ID: IC 27830-M90IC1000.
And this device meets the applicable Industry Canada technical
specications.
The manufacturer of the intentional radiator (model no. M90H or M90S)
or FCC ID: TF7M90-1000 is Everex Communications Inc, which can be
contacted by (510)-687-0075 (www.everexcomm.net).
This device complies with Part 15 of the FCC’s Rules. Operation of this
device is subject to two conditions:
(1) This device may not cause harmful interference; and
(2) This device must accept any interference received, including
interference that may cause undesirable operation.
And this device meets the applicable Industry Canada technical
specication.
The FCC responsible party is Daikin Comfort Technologies
Manufacturing, L.P. , and may be contacted by calling 713-861-2500, or
at 19001 Kermier Rd., Waller TX 77484. (www.DaikinComfort.com)
2
WARNING
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o󰀨 and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit di󰀨erent
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician
for help.
Contents
Unit Features 2 .................................................
Installation Instructions 5 .....................................
Wiring 7 ..........................................................
Operating Instructions 8 ......................................
LED to possible Error Code Mapping 9 .....................
Control Board User Inputs* 13 ...............................
Discharge Grille Orientation Options 14 ..................
Remote Thermostat ....................................... 15
PTAC Connect App ......................................... 19
Conguration Settings Chart ............................. 28
Wiring Diagrams 34 ............................................
IMPORTANT NOTE TO THE OWNER
This manual is to be used by qualied, professionally trained HVAC
technicians only. Goodman does not assume any responsibility
for property damage or personal injury for improper service
procedures or services performed by an unqualied person.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
NOTE: Maximum allowable pressures for the low-pressure and
high-pressure side of the refrigeration system are 223 PSIG and
669 PSIG respectively. This unit is IPX4 rated.
Remember, it is responsibility to install the product safely your
and to know it well enough to be able to instruct a customer in
its safe use.
Safety is a matter of common sense...a matter of thinking before
acting. Most dealers have a list of specic good safety practices...
follow them.
The precautions listed in this Installation Manual are intended
as supplemental to existing practices. However, if there is a
direct conict between existing practices and the content of this
manual, the precautions listed here take precedence.
IMPORTANT NOTE TO THE SERVICER
Read this manual and familiarize yourself with the specic items
which must be adhered to before attempting to service this unit.
The precautions listed in this Installation Manual are intended
as supplemental to existing practices. However, if there is a
direct conict between existing practices and the content of this
manual, the precautions listed here take precedence.
RECOGNIZE THIS SYMBOL
AS A SAFETY PRECAUTION.
UNIT FEATURES
This unit has many features which are dierent than those found
on conventional PTAC units. The servicer must be familiar with
these features in order to properly service the unit.
LCDI Power Cords - Underwriters Laboratories and the
National Electric Code (NEC) now require power cords that
sense current leakage and can open the electrical circuit
to the unit on units rated at 250 volts or less. In the event
that unit does not operate, check the reset button located
on or near the head of the power cord as part of the normal
troubleshooting procedure.
3
LCDI Power Cord
Automatic 3-minute compressor lockout - After the
compressor cycles o, it will not restart for three minutes.
Automatic 2nd stage electric heat - If the room
temperature falls to 4°F below the set point temperature,
the reverse cycle heat is shut o and the electric strip heat
is turned on.
Automatic freeze protection - Whenever power is supplied
to the unit and the master switch is in the ON position,
automatic freeze protection is active. If the unit senses
temperature below 40°F, the fan motor and electric strip
heat are turned on. Freeze protection can be turned o, if
required.
Random restart delay - To help eliminate power surges
after a power outage, the unit is equipped with a two to
four minute random restart delay feature. Whenever the
unit is plugged in with the master switch turned on and the
mode switch set in the cool or heat mode, a random restart
will occur. A random restart condition can be avoided by
setting the mode switch in the fan only or o position
before applying power to the unit.
Fuse holder - On all 265 volt units, fuse holders are factory
installed. Check for blown fuse if unit does not operate.
Fuse holder is located behind the front. Replacement fuses
may be purchased from the Parts Department or contact
your sales representative for part numbers.
Control Panel
Indication LEDs - The controal board has LEDs that indicate
board status and Error code. The LED is visible from the
top left of the unit when the front cover is remeoved.
Refer to the Error Table for LED status and Diagonostics.
Load shedding - When input terminals have been congured
for load shedding operations. If at any time a switch is
closed between the IN1 and COM or IN2 and COM terminals
as congured, the compressor and electric heater will
lockout until the switch is opened.
Transfer fan - The control board allows for an external
(transfer) fan connection.
Front mounting hole - A mounting hole location is provided
to give the owner the option of securing the front to the
chassis. The mounting hole must be drilled at the dimple
indicating the correct location below a louver. The owner
must supply one 1/2 inch long #8 sheet metal screw per
unit. The screw must be removed before the front can be
removed.
Chassis Front
Front Mounting Screw accessed through louvers.
Goodman Part number Manufacturer's Part number Usage (ref)
A3410402 SLC015 15 AMP
A3410403 SLC020 20 AMP
A3410404 SLC025 25 AMP
A3410405 SLC030 30 AMP
Fuse Part Numbers


Product specificaties

Merk: Amana
Categorie: Airco
Model: PTH093J25AXXX

Heb je hulp nodig?

Als je hulp nodig hebt met Amana PTH093J25AXXX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Airco Amana

Handleiding Airco

Nieuwste handleidingen voor Airco