Aluratek ACT01F Handleiding

Aluratek Niet gecategoriseerd ACT01F

Lees hieronder de 📖 handleiding in het Nederlandse voor Aluratek ACT01F (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

If you need further assistance, please contact the Aluratek support department for

troubleshooting prior to returning this device.

E-mail: support@aluratek.com

Web: www.aluratek.com/helpdesk

Local (Irvine, CA): 714-586-8730

Toll free: 1-866-580-1978

Aluratek warrants this product against defect in material or workmanship for 1 YEAR

from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has

been removed or altered on the product.

This warranty does not cover:

A) Cosmetic damage or damage due to acts of God

B) Accident, misuse, abuse, negligence or modification of any part of the product.

C) Damage due to improper operation or maintenance, connection to improper equipment,

or attempted repair by anyone other than Aluratek.

D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT

FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR

IT'S DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's

products, contents or use of this documentation and all accompanying software, and specifically

disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek

reserves the right to revise or update it's product, software or documentation without obligation to

notify any individual or entity.

Product Highlights Folding / Unfolding Legs Instructions

Height Adjustment Tilt Adjustment Bumper Installation

Technical Support Radio and TV Interference Statement Warranty

aluratek.com

model ACT01F

Quick Start Guide

Adjustable Ergonomic Laptop Cooling Table with Fan

To install the bumper, simply

insert the bar into the two

holes to keep it in place.

Insert the attached USB cable

to the USB port on your laptop

to power the cooling fan.

Pull up the legs to unfold the table legs.

Push down the legs to fold the table legs.

Press down on the side buttons to release the locks in order to adjust height levels.

There are four height levels you can adjust to.

Table Surface

Cooling Fan

Removable

Bumper Bar

Attached

Bumper Bar

Table Legs

USB Cable

Pull up side clamps to unlock

and simply adjust the angle of

the table surface by either

pushing down or pulling up on it.

Push back the side clamps to

lock in position.

0˚

30˚

12.6”

9.4”

Product specificaties

Merk:	Aluratek
Categorie:	Niet gecategoriseerd
Model:	ACT01F
Kleur van het product:	Zilver
Gewicht:	1133 g
Breedte:	520 mm
Diepte:	317 mm
Hoogte:	241 mm
In hoogte verstelbaar:	Ja
Materiaal:	Aluminium
Inklapbaar:	Ja
Verstelbaar:	Ja
Stroomvoorziening via USB:	Ja
Bereik kantelhoek:	0 - 30 °
Aantal ingebouwde ventilatoren voor koeling:	1 stuk(s)