Allen & Heath DL1000 Handleiding

Allen & Heath Niet gecategoriseerd DL1000

Lees hieronder de 📖 handleiding in het Nederlandse voor Allen & Heath DL1000 (67 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/67

Includes V1.02 

addendum

This product has been manufactured in the United Kingdom by Allen & Heath

and is warranted to be free from defects, materials and workmanship for a period

of one year from the date of purchase by the original owner.

To ensure the high level of performance and reliability for which this equipment

has been designed and manufactured please read this User Guide before

operating.

In the event of a failure notify and return the defective unit to Allen & Heath or

its authorised agent as soon as possible for repair under warranty subject to the

following conditions :

1. The equipment has been installed and operated in accordance with the

instructions in this User Guide.

2. The equipment has not been subject to misuse either intended or accidental,

neglect, or alteration other than as described in this User Guide or the

Service Manual, or as approved by Allen & Heath.

3. Any necessary adjustment, alteration or repair has been carried out by Allen

& Heath or its authorised agent.

4. The defective unit is to be returned carriage prepaid to Allen & Heath or its

authorised agent with proof of purchase.

5. The equipment to be returned should be packed to avoid transit damage.

These terms of warranty apply to United Kingdom sales. In other territories the

terms may vary according to legal requirements. Check with your Allen &

Heath agent for any additional warranty which may apply.

This user guide is based on the version V2 of operating software. For

further details on the latest release of this software please refer to the Allen &

Heath web site. Whilst we believe the information presented to be reliable we

do not assume responsibility for inaccuracies. We also reserve the right to make

changes in the interest of further product development.

This product complies with the European Electromagnetic

Compatibility directives 89/336/EEC & 92/31/EEC and the

European Low Voltage Directives 73/23/EEC & 93/68/EEC.

Manufactured in the United Kingdom by Allen & Heath Limited

Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, U.K.

http://www.allen-heath.com

. Please keep these

instructions for future reference. All warnings printed here and on the

equipment should be adhered to.

 Do not open the . There are no user

serviceable parts inside. Refer servicing or repair

to qualified service personnel only.

 Connect the to a mains power supply only

of the type and voltage as marked on the rear

panel. Failure to do this is a fire and electrical

shock hazard.

 Use the power cord with sealed mains plug

appropriate for your local mains supply as

provided with the . This equipment must be

earthed (grounded). Do not remove the earth

connection from the power cord.

 Route the power cord so that it will not be walked

on, have heavy items placed on or against it or be

subject to heat, moisture or tension. If the power

cord is damaged or cut refer to your dealer for a

replacement. A damaged or modified power cord

is a potential fire and electrical shock hazard.

 To reduce the risk of fire or electric shock do not

expose the to rain or water or use it in damp

or wet conditions, and do not place containers of

liquids on it which might spill into any openings.

 Do not insert or remove an electric plug with wet

hands. Switch off the mains supply before

plugging or unplugging the equipment.

 Unplug the equipment during lightning storms or

if it is to remain unused for a long period of time.

 Do not locate the in a place subject to

excessive heat or direct sunlight as this could be a

fire hazard. The ambient operating temperature

should not be less than 5°C (41°F) or greater than

35°C (95°F).

 Do not obstruct the ventilation slots or position

the where the air flow required for

ventilation is impeded. uses forced air

cooling with ventilation slots on the front, sides

and underside. Do not operate the on soft

materials such as a thick pile carpet or sofa which

may block the underside openings. If the is

to be operated in a rack unit or flightcase ensure

that it is constructed to allow correct ventilation.

 Do not subject the to excessive shock or

vibration. Ensure adequate protection when

moving, transporting or shipping the .

 Turn off the immediately if it is exposed to

moisture, liquid spilled on the panels, objects

fallen into the openings, the power cord become

damaged, if the equipment has been dropped or

become damaged, or if smoke, odour or noise is

noticed. Consult your dealer for repair.

 The is a heavy piece of equipment due to

the nature of the internal power supply and power

amplifier components. Always ensure you are

correctly positioned and grip securely when

lifting, moving or transporting the equipment.

Before operating the ensure that it is stable

and securely positioned. Failure to ensure this

may result in injury to yourself or damage to the

equipment.

 Follow the instructions printed in this guide for

the installation and operation of the .

 Avoid electromagnetic, radio frequency and

magnetic fields such as those generated by

televisions, computers, motors and lighting

equipment. If interference is encountered

relocate the affected equipment or cables.

 Avoid the use of chemicals, abrasives or solvents

in cleaning the . Use a soft brush and dry

lint-free cloth.

 Connect the as specified using the correct

cables and connectors for their intended purpose

only. Do not connect any source of AC or DC

power to the audio connectors.

 Set the output levels to minimum when

connecting external equipment or reconfiguring

the .

 Do not operate the equipment for a long period of

time at a high or uncomfortable volume level as

this may cause permanent hearing loss.

Product specificaties

Merk:	Allen & Heath
Categorie:	Niet gecategoriseerd
Model:	DL1000

Heb je hulp nodig?

Als je hulp nodig hebt met Allen & Heath DL1000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Allen & Heath

Allen & Heath Avantis Handleiding

6 Januari 2024

Allen & Heath iLive MADI 64 Handleiding

28 Mei 2023

Allen & Heath GS1 Handleiding

24 Mei 2023

Allen & Heath MPS9G Handleiding

9 Mei 2023

Allen & Heath DL1000 Handleiding

9 Mei 2023

Allen & Heath DR128 Handleiding

8 Mei 2023

Allen & Heath SR20 Handleiding

5 Mei 2023

Allen & Heath SQ6 Handleiding

2 Mei 2023

Allen & Heath DT168 Handleiding

1 Mei 2023

Allen & Heath Keymix Handleiding

30 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

B-tech BT7167 Handleiding

21 September 2024

Moen ARC-4200 Handleiding

21 September 2024

IMM Photonics IMM-0825-650-1-E-K Handleiding

21 September 2024

StarTech.com PEX4S552 Handleiding

21 September 2024

StarTech.com CB1S485 Handleiding

21 September 2024

StarTech.com PCI2S422ISO Handleiding

21 September 2024

StarTech.com PCI2S650DV Handleiding

21 September 2024

StarTech.com PCI4S422DB9 Handleiding

21 September 2024

StarTech.com PCI4S650DV Handleiding

21 September 2024

StarTech.com PCI2S1P2 Handleiding

20 September 2024