Akg HUB 4000 Q Handleiding

Akg Niet gecategoriseerd HUB 4000 Q

Lees hieronder de 📖 handleiding in het Nederlandse voor Akg HUB 4000 Q (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 223 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/28
AKG Wireless Systems
HiQnetⓇ Remote Control and Setup
This guide helps you to get started quickly with setting up and remote control of your
AKG wireless system with the PC software Harman System ArchitectTM, the AKG
Wireless iPhoneⓇ App and Soundcraft Vi consoles VM2 feature based on Harman
HiQnetⓇprotocol using the .HUB4000 Q
If you have further questions check out the FAQs and manuals which can be found
online at http://www.akg.com/hiqnet.
If you need further help please send an email to .hiqnet@akg.com
December 2012 Page 1
HUB4000&Q&–&Quickstart&Guide&& & & & & & & &&&&&&&&&&&&&&
Basic information
By connecting an AKG wireless system with the HUB4000 Q to a HiQnet network you
are able to REMOTE CONTROL and SETUP your wireless system from a computer
with Harman System ArchitectTM, your iPhone/iPod/iPad with the AKG Wireless
iPhone App or Soundcraft Vi mixing console using VM2.
The Harman System Architect PC software enables you to setup and configure
your wireless system quick and easily. Frequency Management can be done with a
single click with AKG‘s 1 Click Setup. System Architect also allows full customization
of the user interface for your needs.
The AKG Wireless iPhone App can monitor and control your wireless system from
your Apple iPhoneⓇ or iPodⓇ touch directly on stage via WLAN/Wi-Fi. Checking the
radio signal on stage was never easier as with the AKG Wireless App.
With the VM2 feature of Soundcraft Vi mixing consoles, you can monitor your AKG
wireless systems directly form user interface.Vi Vistonics
For connecting AKG wireless devices to a HiQnet network you need a HUB4000 Q.
The HUB4000 Q is a HiQnet network interface. You can connect up to 8 AKG
wireless devices like DSR700, SR4000, SR4500, SST4 or SST4500 IEM to a HUB4000
Q and remote control them with Harman System Architect and AKG Wireless
iPhone App.
December 2012 Page 2
HUB4000&Q&–&Quickstart&Guide&& & & & & & & &&&&&&&&&&&&&&
Quick Start Guide
1. Step – Prepare Hardware
!Connect the power supplies of the HUB4000 Q(s)
!Connect the power supplies of your wireless devices
!Connect the AKG devices (DSR700, SR4000/4500, SST4…) ‘data’ connectors
with one of the 8 HUB4000 Q ‘AKG network devices’ connectors (8 connectors
for 8 slots).
Use the RJ 11 cables which are included at the HUB4000 Q package.
" you can connect up to 8 AKG devices to a HUB4000 Q
!It is strongly recommended to use an Ethernet DHCP router in your HiQnet
network. If you connect a DHCP network router (which has a built in DHCP
server for automatic IP address management in your ethernet network) setting
up the system is much more easier and faster because you don‘t have to care
about IP addresses (that‘s done by the DHCP server inside your DHCP router).
!Connect the Ethernet connector at the HUB4000 Q with the HiQnet ethernet
LAN (Local Area Network), e.g. if you have connected a DHCP router, with one
of the LAN ports of the DHCP router.
Depending on which monitoring (System Architect, VM2 or Wireless iPhone App)
you want use connect one or multiple of the following with the HUB4000 Q:
!Connect your Computer which should run with the Harman System Architect
HiQnet LAN, e.g. if you have connected a DHCP router/switch, with one of the
LAN ports of the DHCP router.
!Connect a Vi console (with ) ethernet port with the HiQnet LANVM2
!Connect a WLAN (Wireless Local Area Network) router to the HiQnet LAN if you
want to use the AKG Wireless iPhone App
2. Step – Perform Firmware Update - Harman System Architect
December 2012 Page 3
HUB4000&Q&–&Quickstart&Guide&& & & & & & & &&&&&&&&&&&&&&

Product specificaties

Merk: Akg
Categorie: Niet gecategoriseerd
Model: HUB 4000 Q

Heb je hulp nodig?

Als je hulp nodig hebt met Akg HUB 4000 Q stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Akg

Akg

Akg HELICAL Handleiding

1 Juni 2023
Akg

Akg DMS800 Handleiding

29 Mei 2023
Akg

Akg DHT Tetrad P5 Handleiding

27 Mei 2023
Akg

Akg CBL 410 PCC Handleiding

26 April 2023
Akg

Akg ACB-2110 Handleiding

21 April 2023
Akg

Akg MKA20 Handleiding

5 April 2023
Akg

Akg CU800 Handleiding

4 April 2023
Akg

Akg CU400 Handleiding

29 Maart 2023
Akg

Akg RMU4X PRO Handleiding

28 Maart 2023
Akg

Akg CS 5 MF Handleiding

28 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Blackburn

Blackburn Road Mirror Handleiding

18 December 2024
Blackburn

Blackburn Mountain Mirror Handleiding

18 December 2024
Hayter

Hayter RANGER 48 PUSH Handleiding

18 December 2024
GPO

GPO Insight Handleiding

18 December 2024
AOpen

AOpen DT3239D Handleiding

18 December 2024
AOpen

AOpen WB5500 R Handleiding

18 December 2024
AOpen

AOpen WT22M-FBG Handleiding

18 December 2024
Topeak

Topeak Fixer 8 Handleiding

18 December 2024
Thermaltake

Thermaltake The Tower 250 Handleiding

18 December 2024
Blackburn

Blackburn Multi-Mirror Handleiding

18 December 2024