Akai BTE-J20ANC Handleiding

Akai Oordopje BTE-J20ANC

Lees hieronder de 📖 handleiding in het Nederlandse voor Akai BTE-J20ANC (32 pagina's) in de categorie Oordopje. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
USER MANUAL
ACTIVE NOISE CANCELLATION WIRELESS EARPHONES
MODEL: BTE-J20ANC
EN-ENGLISH
TECHNICAL SPECIFICATIONS
SAFETY INFORMATION
Important safety instructions - read carefully before use. It is important that this user manual
should be retained with the appliance for future reference. These warnings have been provided
in the interest of safety. You must read them carefully before installation or use.
WARNINGS
1.Keep the product dry. Do not store it in damp areas.
2.Do not expose the product to the sun or high temperature.
3.Do not attempt to open the product, especially operated by non-professional person.
4.Do not make the product fall down, shake the product violently, or strike the product with hard
objects.
5.Do not use harsh chemicals or cleaner to clean the headset.
6.Do not use something sharp to scratch the surface of the product.
7.Do not continuously charge the headset for over 10 hours to avoid affecting the service life.
Model number
BTE-J20ANC
Chipset
Bluetrum AB5636E
Bluetooth Version
Bluetooth V5.3
Bluetooth Frequency
2.4-2.485GHz
Audio decoding
SBC/AAC
Profiles supported
HFP A2DP AVRCP AVDTP GAP SDP
Active Cancellation
25-28dB
Weight
37g
Base Unit Dimensions
74x38x28mm
Speaker Unit size
13mm
Charging Input
5V 500mA
Microphone Sensitivity
42±3dB
Frequency Response
20Hz-20000Hz
Built in Battery type (Earbuds)
Lithium 40 mAh 3.7V
Built in Battery type(Base Unit)
Lithium 300mAh 3.7V
Standby Time(Earbuds)
240 Hours
Playing Time(Earbuds)
4.0 hours (Approx.)
Charging Time (Earbuds)
1.5 Hours (Approx.)
Charging Time (Charging case)
1.5 Hour (Approx.)
Bluetooth Range
10 meters (open space with no obstacle)
Bluetooth Transmission power
10 dBm
Supported system
iOS & Android
PACKAGE CONTENT
USER MANUAL
EARPHONES
TYPE-C CHARGING CABLE
OPERATION METHOD
Before first use
Please charge fully the earphones before first use by ensuring they are properly inserted into the
case and then charging the case using the TYPE-C cable provided.
Power on
Remove Earphones from their case.
They will automatically switch on and you will hear a message "Power on".
The lights on the Earphones will flash blue/red until paired.
Power off
Insert the Earphones into the charging case and they will automatically switch off and enter
charging mode.
Pairing the Earphones
You can connect as one single Earphone, or together as a pair.
ON FIRST USE
Pairing one earphone
Remove just one earphone from the charging case. The single earphone will power on
automatically. A LED light will flash Red&Blue alternately. On your device, go to the Bluetooth
settings and select " BTE-J20ANC ".
Pairing both earphones
Remove both earphones from the charging case. They will power on and begin to pair with each
other automatically.
When the LED light on one earphone stops flashing, and the LED light on the other earphone is
still flashing, it means both earphones are paired to each other.
On your device, go to the Bluetooth settings and select " BTE-J20ANC ".


Product specificaties

Merk: Akai
Categorie: Oordopje
Model: BTE-J20ANC

Heb je hulp nodig?

Als je hulp nodig hebt met Akai BTE-J20ANC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Oordopje Akai

Handleiding Oordopje

Nieuwste handleidingen voor Oordopje