Akai ACRS-4000 Handleiding

Akai Horloge ACRS-4000

Lees hieronder de 📖 handleiding in het Nederlandse voor Akai ACRS-4000 (43 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/43
BLUETOOTH CLOCK RADIO
ACRS- 4000
INSTRUCTION MANUAL
EN - ENGLISH
CONTROL LOCATION
1. POWER
2. NEXT / F.F.
3. PREVIOUS / REWIND
4. TIME/PROGRAME/PLAY/PAUSE
5. 10 TUNING + / +
6. TUNING - / 10-
7. ALARM
8. MODE
9. SLEEP/ SNOOZE
10. SPEAKER
11. VOLUME CONTROL
12. MICRO SD CARD SLOT
13. USB CONNECTOR
14. LED DISPLAY
15. 5V ADAPTOR PORT DC
16. WIRE ANTENNA
OPERATING INSTRUCTION
Introduction
Please read this manual carefully so you can have a better understanding of performance and features
of this clock radio.
AC Adaptor Operation
Insert one end of the AC/DC 5V adaptor to the adaptor port (Location 16) of the unit, and the other end
to the power supply. The unit will be automatically in standby mode when connecting to AC power.
Warning! Before using the unit, check the local mains supply is compatible with the unit. Do not plug or if
unplug the adaptor when your hands wet.
When the unit will not be used for long periods of time ( , vacation etc.) disconnect the adaptor from the wall e.g.
outlet.
Normal Operation
1. POWER Press to switch on the radio.
2. MODE Press once or more to select mode (Bluetooth / FM / USB / Card).
3. VOLUME Adjust the sound with button.
4. POWERTo switch to standby mode, press once.
Setting Time
Auto update
After a short time under FM RDS radio signal, the current time will appear on the display.
Manual Setting
1. Check the radio if it is switched o or in standby mode.
2. PROG Press and hold for 3 seconds on the panel to start clock setting.
3. PREVIOUS NEXTPress or button for 12-hours/24-hours selection.
4 PROG . Press to hour setting.
5 PREVIOUS NEXT. To set the hours, press or while the display is still ashing.
6 PROG . Press to minute setting.
7 PREVIOUS NEXT. To set the minutes, press or while the display is still ashing.
8. PROG Press to complete the clock setting.
Setting T Alarm he
1. Check the radio if it is switched o or in standby mode.
2. Press the once to preview the alarm time AL1 and AL2. ALARM
3. Press ALARM for 3 seconds to start alarm setting.
4. PREVIOUS NEXTTo set the hours, press or while the display is still ashing.
5 . Press ALARM to minute setting.
5 PREVIOUS NEXT. To set the minutes, press or while the display is still ashing.
6 ALARM PREVIOUS NEXT. Press and press or to select the alarm sound as Buzz (bb), Radio (rad)
or USB (usb).
7. ALARM PREVIOUS NEXTPress and press or to select the volume of alarm sound.
8. ALARM Press to complete the alarm setting.
Remark: When the alarm rings, the volume of the alarm will gradually increase. Press ALARM to stop
the ringing.
*During standby mode*
Press once: preview AL1. ALARM
Press twice: preview AL2. ALARM
Press three times: you will see two dots ( ) in front of the time shown on the screen, which ALARM :
indicates the alarm is switched on.
Press four tim the dots ( ) no longer shown on the screen in front of the time, which ALARM es: :
indicates the alarm is turned o.


Product specificaties

Merk: Akai
Categorie: Horloge
Model: ACRS-4000

Heb je hulp nodig?

Als je hulp nodig hebt met Akai ACRS-4000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Akai

Handleiding Horloge

Nieuwste handleidingen voor Horloge