Aiwa NSX-MT90 Handleiding

Aiwa CD-spelers/recorder NSX-MT90

Lees hieronder de đź“– handleiding in het Nederlandse voor Aiwa NSX-MT90 (58 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/58
For assistance and information
call toll free I-800-BUY-AHMA
(United States and Puerto Rico)
87-INFR-91O-O1
970220 AKY-U-O
tmi3iE
DIGITAL AUDIO
“CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.”
NOTE
This equipment has been andtested found to comply with the
limits for a 15Class B digital device, pursuant to Part of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not theinstalled and used in accordance with
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be anddetermined by turning the equipment off on, the user is
encouraged to to oftry correct the interference by one or more
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the theseparation between equipment and
receiver.
- Connect the equipment into an onoutlet circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help,
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the themanufacturer, may void user’s
right or authority to operate this product.
PRECAUTIONS
Read the Operating Instructions carefully and completely before
operating the theunit. Be sure to keep Operating Instructions
for future reference, All warnings and cautions in the Operating
Instructions and on bethe unit should strictly followed, as well
as the safety suggestions below.
Installation
1
2
3
4
5
6
7
8
Water and moisture — Do not use this unit near water, such
as near a bathtub, washbowl, swimming pool, or the like.
Heat — Do not use this unit near sources of heat, including
heating vents, stoves, or other appliances that generate heat.
It also should placednot be in temperatures less than 5°C
(41 “F) or greater than 35°C (95”F).
Mounting surface — Place the unit on a flat, even surface.
Ventilation — The unit should be situated with adequate
space around it so that proper heat ventilation is assured.
Allow 10 andcm (4 rearin.) clearance from the the top theof
unit, and 5 cm (2 in.) from each side.
- Do not theplace unit on a bed, rug, or similar surface that
may block the ventilation openings.
- Do not theinstall unit in a bookcase, cabinet, or airtight rack
where ventilation may be impeded.
Objects and liquid entry — Take care that objects or liquids
do not get the theinside unit through ventilation openings.
Carts and stands — When
placed or mounted on a stand
or cart, the unit should be moved
with care.
@
â—Ź\
Quick stops, excessive force, 3
and uneven surfaces may cause AV*
the unit or orcart to overturn fall.
Condensation — Moisture may form on the CD pickup lens
when:
- The unit is moved from a acold spot to warm spot
- The heating system has just been onturned
- The unit is used in a very humid room
- The unit is cooled by an air conditioner
When this unit has condensation inside, it may not function
normally. Should this occur, leave the unit for a few hours,
then try to operate again.
Wall or ceiling mounting —The unit should not be mounted
on a wall or ceiling, unless specified in the Operating
Instructions.
Electric Power
1 Power sources — Connect this unit only to power sources
specified in the theOperating Instructions, and onas marked
unit.
2 Polarization —As a safety feature, some units are equipped
with polarized AC power plugs which can only be inserted
one away into power outlet. If it is difficult or impossible to
insert the theAC power plug into an outlet, turn plug over and
try again. If it still does not theeasily insert into outlet, please
call a qualified service servicetechnician to or replace the
outlet, To avoid defeating the thesafety feature of polarized
plug, do anot force it into power outlet.
3 AC power cord
- When disconnecting the out theAC power cord, pull it by
AC power plug. Do not thepull cord itself.
- Never handle the AC power plug with wet hands, as this
could result in fire or shock.
- Power cords should be firmly secured to avoid being severely
bent, pinched, or walked upon. Pay particular attention to
the the thecord from unit to power socket.
- Avoid overloading AC power plugs and extension cords
beyond their capacity, as this could result in fire or shock.
I ENGLISH
4
5
Extension cord — To help prevent electric shock, do not
use a anpolarized AC power plug with extension cord,
receptacle, or other outlet unless the polarized plug can be
completely inserted to of ofprevent exposure the blades the
plug.
When not in use — Unplug the theAC power cord from AC
power plug if the unit wi’11n;t be used for several months or
more. When the cord is plugged in, a small amount of current
continues to toflow the theunit, even when power is turned
off
Outdoor Antenna
1 Power lines —— When connecting an outdoor antenna, make
sure it is located away from power lines.
2 Outdoor antenna grounding — Be sure the antenna system
is properly grounded to provide protection against unexpected
voltage surges or static electricity build-up. Article 810 of the
National Electrical Code, ANS1/NFPA70, provides information
on andproper grounding of the mast, supporting structure,
the the thelead-in wire to antenna discharge unit, as aswell
size of tothe grounding unit, connection grounding terminals,
and requirements for grounding terminals themselves.
Antenna Grounding According to the National Electrical Code
~ ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
~ POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC H)ART 250 PART
NEC-NATIONAL ELECTRICAL CODE
Maintenance
Clean the theunit only as recommended in Operating
Instructions,
Damaae Reauirina Service
Have the units serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have gotten theinside unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has hasbeen dropped, or the cabinet been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.
TABLE OF CONTENTS
Precautions ...................................................................l
PREPARATIONS
SETTING UP .......................................................................3
REMOTE CONTROL .........m.................................................5
BEFORE OPERATION ........................................................6
SOUND
AUDIO ADJUSTMENTS ................................................... 6
GRAPHIC EQUALIZER ......................................................7
DSP SURROUND SYSTEM .............................................. 7
RADIO RECEPTION
MANuALTuNING ..............m..........m............m...................l....8
PRESETTING STATIONS .............................................s....8
CD PLAYING
BASIC OPERATIONS ...............m....................m...m......m.... .. 9
PROGRAMMED PLAY .................................................... 10
TAPE PLAYBACK
BASIC OPERATIONS .................................................... ...ll
CONTINUOUS PLAY ...................................................... 12
RECORDING
BASIC Recording .........m.............................................. 13
DUBBING A TAPE MANUALLY ...................................... 14
DUBBING THE WHOLE TAPE ........................................ 14
Al EDIT RECORDING ...................................................... 15 m
PROGRAMMED EDIT RECORDING ............................... 16
DOLBY PRO LOGIC
ADJUSTING SPEAKER LEVEL BALANCE ...................17
PLAY WITH DOLBY PRO LOGIC ................................... 18
KARAOKE
MICROPHONE MIXING ................................................... 19
KARAOKE PROGRAM .................................................... 20
CLOCK AND TIMER
SETTING THE CLOCK .................................................... 21
SETTING THE TIMER .....m................................................ 21
SETTING THE SLEEP TIMER ......................................... 22
OTHER CONNECTIONS
CONNECTING OPTIONAL EQUIPMENT ....................... 23
LISTENING TO EXTERNAL SOURCES ......................... 23
GENERAL
CARE AND MAINTENANCE ........................................... 24
TROUBLESHOOTING GUIDE ......................................... 24
SPECIFICATIONS ...................m....m................................... 25
PARTS INDEX ................................................... Back cover
ENGLI!;H 2

Product specificaties

Merk: Aiwa
Categorie: CD-spelers/recorder
Model: NSX-MT90

Heb je hulp nodig?

Als je hulp nodig hebt met Aiwa NSX-MT90 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding CD-spelers/recorder Aiwa

Aiwa

Aiwa XP-R210 Handleiding

25 Mei 2023
Aiwa

Aiwa PCD-810 Handleiding

9 Mei 2023
Aiwa

Aiwa NSX-D737 Handleiding

8 Mei 2023
Aiwa

Aiwa NSX-MT320 Handleiding

7 Mei 2023
Aiwa

Aiwa XP-V733 Handleiding

30 April 2023
Aiwa

Aiwa XP-EV500 Handleiding

27 April 2023
Aiwa

Aiwa NSXV-72 Handleiding

25 April 2023
Aiwa

Aiwa NSX-AJ203 Handleiding

24 April 2023
Aiwa

Aiwa NSX-D77 Handleiding

24 April 2023
Aiwa

Aiwa NSX-J17 Handleiding

12 April 2023

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder

Marantz

Marantz SA-17S1 Handleiding

15 November 2024
Klipsch

Klipsch PD-10AE Handleiding

13 November 2024
Rotel

Rotel Michi Q5 Handleiding

3 November 2024
Reflexion

Reflexion PCD520MF Handleiding

29 September 2024
Auna

Auna Reference 802 Handleiding

24 September 2024
Advance

Advance X-CD1000 EVO Handleiding

11 September 2024
Shanling

Shanling EC mini Handleiding

7 Augustus 2024
Shanling

Shanling CD80 Handleiding

7 Augustus 2024
Shanling

Shanling SCD1.3 Handleiding

7 Augustus 2024
Shanling

Shanling ET3 Handleiding

7 Augustus 2024