Aiwa Exos-3 Handleiding

Aiwa Speaker Exos-3

Lees hieronder de 📖 handleiding in het Nederlandse voor Aiwa Exos-3 (3 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Quick Start Guide

Exos-3 Features

Aiwa Exos-3 User Manual

service@aiwa.us.com

(888) 982-8561

Aiwa Corporation

• IP67 Waterproof

• Stereo pairing of two speakers

• Onboard DSP

• Two subwoofer radiators

• USB power bank

• Speaker

• USB-C Charging Cable-50CM / 3.5 mm AUX-IN Cable 50CM

• Strap

• USB Power adapter

• User Manual

Speciﬁcations

Supported proﬁles: AVRCP V1.6, A2DP V1.3, HFP V1.7, HSP V1.2

Bluetooth range: 33 feet (10m)

Dimensions: 282*124*124 mm

Internal battery: Li-Ion 7.4V/5000mAh

USB-C Charging input: DC 5V 2A

USB Charging output: DC 5V 1A

Speaker diameter: φ70mm*2 + 30mm*1

Impedance: 4Ω

Max power output: 20W * 2 + 6W * 1

Frequency response: 50HZ-20KHZ

Signal to noise ratio: 80 db

THD: ≤1%

Controls, Connectors and Lights

Package Contents

2 3 4 51

Mod el No: AIWA Exos- 3

Inpu t : DC 5V / 2A

Battery:L i-io n 7.4 V/500 0mA h

2. + Button 4. Bluetooth5. Power Button

9. Bluetooth Indicator 11. Aux Indicator

10. Charge Indicator

8. AUX -In

7. USB-C Port

6. USB-A Port

1. Stereo Pair button

3. - Button

Operation Pairing two speakers

Powering ON/OFF

Press and Hold "ON/OFF" button for 2 seconds to power on and power oﬀ. The battery

capacity indicator will time-out after 10 minutes; press any button and the indicator will light

again.

Pairing

The unit will automatically go into “Pairing Mode” when it is powered on, the blue LED light

will blink to indicate you have entered pairing status.

In your device’s Bluetooth settings, select “Aiwa Exos-3.” Once paired, an audible prompt will

indicate the successful pairing and the blue LED light will illuminate solidly once paired.

Press and hold the Bluetooth button for 3 seconds to disconnect the current device and pair

to a new one.

Begin Streaming Music

Press Power Button to start playing music, Power Button press again to pause music.

Press and Hold Button 2 seconds to play the next track.

Press and Hold Button 2 seconds to restart the current track. Press either Button or

Button for volume control.

Making and Receiving Phone Calls

Use the built-in microphone to make and receive calls, using the device as a speakerphone.

Short press Bluetooth to accept and end a call.

To reject a call, press and hold Bluetooth

Aux Mode

Plug in the supplied 3.5 mm cable into the unit, connect the other to your device. The light

green LED will light to indicate “Aux” mode.

In Aux Mode,

Press Button to increase the volume

Press Button to lower the volume

Press Button to mute the speaker

Skip, back and play/pause are controlled on your phone only while in Aux Mode

Two Exos-3 speakers can be linked together to enjoy wireless stereo sound.

1. Make sure the speakers do not have an active Bluetooth connection (disconnect by

pressing the Bluetooth button if needed.)

2. Power on both speakers, press the Stereo Pair Button on the one you wish to be the

primary speaker. The secondary speaker will automatically connect and you’ll hear an

audible prompt when pairing is successfully completed.

3. The primary speaker’s blue LED will blink (this speaker will play the left channel audio)

and the secondary speaker’s blue LED will illuminate continuously (this speaker will play

the right channel audio.)

4. Connect your phone or tablet to the primary speaker via Bluetooth or Aux input to the

primary speaker.

Notes:

• The two speakers will remain paired even when phones are disconnected, to disconnect

the secondary speaker, simply press the button on the primary speaker.

• While two speakers are paired, some controls will only be operational on the primary

speaker.

Power bank function

The USB output can be used for charging the speaker is on or oﬀ. When the charging

device is fully an audible indicator will be heard, and charging will cease.

Charging

1. Battery life: The battery will last approximately 15 hours when used at 50% volume, or 9

hours at 80% volume.

2. Charging additional devices from the USB port will reduce battery life accordingly.

3. The power indicator will blink while charging. The 4 orange LEDs indicate current battery

level. When all 4 are fully illuminated, the device is completely charged.

4. Charge time: Approximately 4 hours from fully depleted to fully charged.

Notes

The device should be fully charged before long-term storage and recharged every 3

months to ensure the battery operates at full capacity.

Button Functions

3. Stereo Pair Button

Pairs two Exos-3 speakers for stereo sound

1. Button:

Short press to increase volume (or press and hold to advance to the

next track)

2. Button:

Short press to lower the volume (or press and hold to return to the

start of the current track)

4. Bluetooth Button:

Press and hold to pair with a new device

5. Power Button:

Press and hold the button to turn the speaker on/oﬀ (or short press for

play/pause)

6. USB-A Port:

Charges device using a USB-A charger

7. USB-C Port:

Charges Exos-3 via using a USB-C charger

8. Aux-In:

Connect to the speaker via 3.5mm aux-in cable

9. Bluetooth Indicator:

Shows Bluetooth connection status

10. Charge Indicator:

Shows remaining battery power

11. Aux Indicator:

Illuminates when Aux input is connected

FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the

condition that this device does not cause harmful interference (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Changes or modiﬁcations not expressly approved by the party responsible for

compliancecould void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

CE Statement This device was tested for typical body-worn operations. To comply with RF

exposure requirements, a minimum separation distance of฀ 20mm must be maintained

between the user’s body and the device, including the antenna. Third-party belt-clips, holsters,

and similar accessories used by this device should not contain any metallic components.

Body-worn accessories that do not meet these requirements may not comply with RF exposure

requirements and should be avoided. Use only the supplied or an approved antenna.This

device in compliance with the essential requirements and other relevant provisions of Directive

2014/53/EU. All essential radio test suites have been carried out.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment oﬀ and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit diﬀerent from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be

installed and operated with minimum distance between 20cm the radiator your body:

Use only the supplied antenna.

1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED฀BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

2. The product shall only be connected to a USB interface of version฀USB 2.0

3. Adapter shall be installed near the equipment and shall be easily฀accessible.

4. The plug considered as disconnect device of adapter

5. The device complies with RF speciﬁcations when the device used฀at 20mm form your body

Product specificaties

Merk:	Aiwa
Categorie:	Speaker
Model:	Exos-3

Heb je hulp nodig?

Als je hulp nodig hebt met Aiwa Exos-3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Aiwa

Aiwa APX-1200BT Handleiding

12 November 2024

Aiwa SP-A100 Handleiding

15 Oktober 2024

Aiwa KBTUS-250 Handleiding

10 Juli 2024

Aiwa KTBUS-608 Handleiding

10 Juli 2024

Aiwa KBTUS-450 Handleiding

20 Juli 2023

Aiwa RBTU-600 Handleiding

11 Juni 2023

Aiwa SB-X120 Handleiding

15 Mei 2023

Aiwa BSTU-800 Handleiding

12 Mei 2023

Aiwa RS-X60 Diviner Ace Handleiding

6 Mei 2023

Aiwa MI-X250 Retro Cubic Handleiding

6 Mei 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Bose DesignMax DM5P Handleiding

2 December 2024

Yamaha CHR12 Handleiding

2 December 2024

Yamaha DHR12 Handleiding

2 December 2024

Yamaha DHR15M Handleiding

2 December 2024

Yamaha CHR15M Handleiding

2 December 2024

Yamaha True X Speaker 1A WS-X1A Handleiding

2 December 2024

Yamaha Stagepas 100 Handleiding

2 December 2024

Yamaha NS-2000A Handleiding

2 December 2024

Yamaha DXS15XLF-D Handleiding

2 December 2024

Yamaha DZR15-D Handleiding

2 December 2024