Aiptek 3D-P8 Handleiding
Aiptek
Digitaal fotodisplay
3D-P8
Lees hieronder de 📖 handleiding in het Nederlandse voor Aiptek 3D-P8 (100 pagina's) in de categorie Digitaal fotodisplay. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/100
User’s Manual
www.aiptek.eu
EN
Welcome to Aiptek
Dear user, thank you for purchasing this 3D digital photo frame.
Aiptek 3D P8 is part of the new Aiptek 3D product line with camcorders and digital photo
frames. Thanks to the latest 3D Parallax Barrier technology, P8 is a great companion to view
3D videos and pictures without 3D glasses. With Aiptek 3D P8, you can enjoy 3D videos and
pictures on a 20.3 cm (8”) display wherever you are. Additionally, 2D content is automatically
displayed in 3D powered by the intelligent 3D conversion engine inside the 3D photo frame P8.
The illuminated touch keys make the products easy to use and elegant in any private and
business occasion.
Before you start using the product, we recommend reading this user’s manual to obtain the
best results with your new digital picture frame. We wish you have a lot of fun.
Safety Precautions
1. Keep the device and packaging materials out of the reach of infants and children.
2. Avoid subjecting the power adapter and other contacts to dripping or splashing water and
dry your hands before you use it. Do not place objects filled with liquids such as vases, etc.
on or near the device.
3. Make sure that the used power outlet is always readily available and never hidden. In case
of emergency, use the power adapter to separate the device from the power network.
4. Keep your device away from all flames such as candles and do not set them up in the
vicinity of the device.
5. Keep the unit at least 10 cm away from other objects. Make sure the ventilation is not
covered by newspapers, tablecloths, curtains, etc.
6. For your own safety, do not use the picture frame during thunderstorms or lightning.
7. To ensure safety and the display effect, always use the power adapter supplied by the
manufacturer.
8. The battery is integrated with the device. Do not dissemble and modify. The battery should
be replaced by qualified service staff only.
9. To ensure normal operation of this product and avoid any damage, do not use or store this
product under the following conditions: environment with too low/high temperature; places
with high humidity or long-term direct sunshine; bad conditions involving strong impacts.
10. During the operation, this product may heat lightly, which is normal.
11. Wait before connecting the mains adapter if the device has been moved from a cold
location into a warm one. Any condensation that has formed may in certain circumstances
destroy the device. As soon as the device has reached room temperature it can be used
without risk.
12. Handle the product with care. Avoid contact with sharp objects. Keep device away from
metallic objects.
13. Place the digital photo frame on a flat surface. Any collision or falling to the ground is likely
to damage the product.
14. The screen (LCD panel) of this product is made of glass, which can easily be damaged by
abnormal external force or sharp objects.
15. Never press the LCD, lest it be damaged. If liquid crystal leaks, you need to clean it
immediately with soap and water.
16. Do not drop the frame or disassemble the product otherwise the warranty voids. Opening
or removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
17. According to the manufacturer, for the colored LCD a 0.01% pixel-sum flaw rate is
allowable. Your understanding is appreciated.
User’s Manual
www.aiptek.eu
EN
18. To clean the screen, cut off the power supply first and use a damp soft cloth to wipe it.
Never apply alcohol, gasoline or other chemical agents. Use only accessories supplied by
the manufacturer.
19. This product supports hot plugging of memory cards. However, it is suggested to power off
the product before plugging/unplugging your memory card to protect the memory card.
20. Use only the accessories supplied by the manufacturer.
21. Both product and user’s manual are subject to further improvement or supplement without
further notice.
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is
subjected to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in residential installations. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Move the equipment away from the receiver.
- Plug the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/television technician for additional suggestions.
You are cautioned that any change or modifications to the equipment not expressly approved
by the party responsible for compliance could void Your authority to operate such equipment.
If the life time of the product ends, try to recycle all
components, if possible. Batteries and rechargeable batteries
must not be disposed with household waste! Please dispose
them at a local recycling center. Together we all contribute to
the protection of our environment.
Disposal of waste batteries (applicable in the European Union
and other European countries with separate collection
systems)
This symbol on the battery or on its packaging indicates that the battery provided
with this product shall not be treated as household waste.
On certain batteries, this symbol might be used in combination with a chemical
symbol. The chemical symbols of mercury (Hg) or lead (Pb) are added if the
battery contains more than 0.0005% mercury or 0.004% lead.
To ensure the battery will be treated properly, hand over the product at end-of-life to the
applicable collection point for the recycling of electrical and electronic equipment and hand the
battery over to the applicable collection point for recycling of waste batteries.
User’s Manual
www.aiptek.eu
EN
Table of Contents
Introduction..................................................................................................... 1
The 3D display technology ........................................................................... 1
Viewing 3D images....................................................................................... 1
Extra notice regarding 3D viewing: .......................................................... 1
Product Features.......................................................................................... 1
Package Content.......................................................................................... 2
3D Digital Photo Frame Overview ................................................................ 2
Remote Control ............................................................................................ 3
Getting Started ................................................................................................ 3
How to set up the stand................................................................................ 3
Connecting to AC power............................................................................... 3
Power on/off your photo frame ..................................................................... 4
Charging the battery..................................................................................... 4
Setting up language .......................................................................................4
Organizing 3D content.................................................................................. 5
TIPS ............................................................................................................. 5
Connecting to PC ......................................................................................... 6
Insert memory card ...................................................................................... 6
Operations and Functions ............................................................................. 7
Main Menu ................................................................................................... 7
Photo Mode.................................................................................................. 7
Configuring the Photo View Settings........................................................ 8
Video Mode .................................................................................................. 9
Configuring the Video Playback............................................................... 9
Music Mode................................................................................................ 10
Configuring the Music Playback............................................................. 10
Time/Date mode......................................................................................... 11
Storage mode............................................................................................. 12
SETUP MENU............................................................................................ 13
Troubleshooting............................................................................................ 14
Reset Your Device...................................................................................... 14
Specifications ............................................................................................... 15
Product specificaties
| Merk: | Aiptek |
| Categorie: | Digitaal fotodisplay |
| Model: | 3D-P8 |
Heb je hulp nodig?
Als je hulp nodig hebt met Aiptek 3D-P8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Digitaal fotodisplay Aiptek
27 Augustus 2022
27 Augustus 2022
27 Augustus 2022
27 Augustus 2022
27 Augustus 2022
27 Augustus 2022
Handleiding Digitaal fotodisplay
- Digitaal fotodisplay Philips
- Digitaal fotodisplay Panasonic
- Digitaal fotodisplay Epson
- Digitaal fotodisplay Acer
- Digitaal fotodisplay Agfa
- Digitaal fotodisplay Akai
- Digitaal fotodisplay Aluratek
- Digitaal fotodisplay Difrnce
- Digitaal fotodisplay Dikom
- Digitaal fotodisplay Dual
- Digitaal fotodisplay Hama
- Digitaal fotodisplay Hipstreet
- Digitaal fotodisplay Intenso
- Digitaal fotodisplay Kodak
- Digitaal fotodisplay Lavod
- Digitaal fotodisplay Maginon
- Digitaal fotodisplay Neovo
- Digitaal fotodisplay Nextbase
- Digitaal fotodisplay Pandigital
- Digitaal fotodisplay Parrot
- Digitaal fotodisplay Plawa
- Digitaal fotodisplay Renkforce
- Digitaal fotodisplay Rollei
- Digitaal fotodisplay Sweex
- Digitaal fotodisplay TakeMS
- Digitaal fotodisplay Telefunken
- Digitaal fotodisplay Transcend
- Digitaal fotodisplay Traveler
- Digitaal fotodisplay Wintec
- Digitaal fotodisplay Xoro
- Digitaal fotodisplay Jobo
Nieuwste handleidingen voor Digitaal fotodisplay
29 September 2023
29 September 2023
27 September 2023
29 September 2023
29 September 2023
29 September 2023
29 September 2023
29 September 2023
27 September 2023
27 September 2023