Aim TTi EX355P Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Aim TTi EX355P (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
EX355P
Programmable Bench yPower Suppl
1
Table of Contents
Introduction 2
Specification 3
Safety 5
Installation 6
Connections 6
Operation 7
Remote Operation 8
Remote Commands 9
Maintenance 12
Instructions en Francais 13
Bedienungsanleitung auf Deutsch 21
Istruzioni in Italiano 29
Instrucciones en Español 37
2
Introduction
The EX355P is a digitally controlled version of the EX355 with an isolated RS 232 interface. -
Using mixed- mode regulation technology it provides 0 to 35V at 0 to 5A in a compact and
lightweight unit.
The EX355P offers a low cost solution for a basic programmable PSU, and will be sufficient for -
many applications where the sophistication and complexity of GPIB is not needed.
A -simple command set allows remote control of voltage, current and output enable together with
read-back of metering values and operational status.
Local control is via three rotary encoders providing rapid and accurate setting of voltage and
current for bench use.
Excellent line and load regulation are matched by low noise and good transient response. High
power efficiency ensures that the unit remains cool without any fan noise.
The EX series has been designed to meet the stringent requirements of the latest relevant IEC
standards for safety and EMC, including harmonics emissions. All outputs are intrinsically short
circuit proof, and are protected against external voltages and reverse currents.


Product specificaties

Merk: Aim TTi
Categorie: Niet gecategoriseerd
Model: EX355P

Heb je hulp nodig?

Als je hulp nodig hebt met Aim TTi EX355P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Aim TTi

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd