AIC XD1100-1102 Handleiding

AIC Disk array XD1100-1102

Lees hieronder de 📖 handleiding in het Nederlandse voor AIC XD1100-1102 (72 pagina's) in de categorie Disk array. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/72

Model

SSG-DR

Documen

Date

Version

FC41-1102

SA11-1102

XM-UG-

02/09/20

1.05

A1 FC

A1 SA

-XD1100-11

Stora

Use

cription

SAS to SA

to SAS/S

Solution

00 S

’s Man

/SATA 1U

TA 1U10

roup

ries

10 Single E

ingle Expa

pander RB

der RBOD

1U10 RBOD User’s Manual

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any

form or by any means, electronic, mechanical, photo-static, recording or otherwise, without the

prior written consent of the manufacturer.

Trademarks

All products and trade names used in this document are trademarks or registered trademarks of

their respective holders.

Changes

The material in this document is for information purposes only and is subject to change without

notice.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Warning:

• A shielded-type power cord is required in order to meet FCC emission limits and also to

prevent interference to the nearby radio and television reception. It is essential that only

the supplied power cord be used.

• Use only shielded cables to connect I/O devices to this equipment.

• You are cautioned that changes or modifications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

Disclaimer:

Advanced Industrial Computer shall not be liable for technical or editorial errors or omissions

contained herein. The information provided is provided "as is" without warranty of any kind. To

the extent permitted by law, neither AIC or its affiliates, subcontractors or suppliers will be liable

for incidental, special or consequential damages including downtime cost; lost profits; damages

relating to the procurement of substitute products or services; or damages for loss of data, or

software restoration. The information in this document is

subject to change without notice.

1U10 RBOD User’s Manual

SAFETY PRECAUTIONS

Before getting started, please read the following important cautions:

• All cautions and warnings on the equipment or in the manuals should be noted.

• Most electronic components are sensitive to electrical static discharge, therefore, be sure to ground

yourself at all times when installing the internal components.

• Use a grounding wrist strap and place all electronic components in static-shielded devices. Grounding

wrist straps can be purchased in any electronic supply store.

• Be sure to turn off the power and then disconnect the power cords from your system before performing

any installation or servicing. A sudden surge of power could damage sensitive electronic components.

• Do not open the system’s top cover. If opening the cover for maintenance is a must, only a trained

technician should do so. Integrated circuits on computer boards are sensitive to static electricity. Before

handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity on your body.

• Place this equipment on a reliable surface when install. A drop or fall could cause injury.

• Please keep this equipment from away humidity.

• Carefully mount the equipment into the rack, in such manner, that it won’t be hazardous due to uneven

mechanical loading.

• Do not leave this equipment in an environment unconditioned, out of operation or storage temperature

range may damage the equipment.

• This equipment is to be installed for operation in an environment with maximum ambient temperature

below 35°C.

• The openings on the enclosure are for air convection to protect the equipment from overheating. DO

NOT COVER THE OPENINGS.

• Never pour any liquid into ventilation openings. This could cause fire or electrical shock.

• Make sure the voltage of the power source is within the specification on the label when connecting the

equipment to the power outlet. The current load and output power of loads shall be within the

specification.

• This equipment must be connected to reliable grounding before using. Pay special attention to power

supplied other than direct connections, e.g. using of power strips.

• Place the power cord out of the way of foot traffic. Do not place anything over the power cord. The

power cord must be rated for the product, voltage and current marked on the product’s electrical ratings

label. The voltage and current rating of the cord should be greater than the voltage and current rating

marked on the product.

• If the equipment is not used for a long time, disconnect the equipment from mains to avoid being

damaged by transient over-voltage.

• Never open the equipment. For safety reasons, only qualified service personnel should open the

equipment.

• If one of the following situations arise, the equipment should be checked by service personnel:

¾ The power cord or plug is damaged.

¾ Liquid has penetrated the equipment.

¾ The equipment has been exposed to moisture.

¾ The equipment does not work well or will not work according to its user manual.

¾ The equipment has been dropped and/or damaged.

¾ The equipment has obvious signs of breakage.

¾ Please disconnect this equipment from the AC outlet before cleaning. Do not use liquid or detergent

for cleaning. The use of a moisture sheet or cloth is recommended for cleaning.

Product features and specifications are subject to change without notice.

Product specificaties

Merk:	AIC
Categorie:	Disk array
Model:	XD1100-1102
Gewicht:	15500 g
Stroomvoorziening:	100 - 240VAC
Frequentie van processor:	553 MHz
Vormfactor:	SFF
Afmetingen verpakking (BxDxH):	586 x 734 x 250 mm
Interface:	Mini SAS 4x
Type processor:	RISC
Temperatuur bij opslag:	-20 - 60 °C
Intern:	Nee
Luchtvochtigheid bij opslag:	10 - 90 procent
Type behuizing:	Rack (1U)
Capaciteit voedingsunit (PSU):	300 W
Redundante voeding:	Ja
Maat:	2.5 "
Aantal geïnstalleerde processoren:	1
Aantal storage drives geïnstalleerd:	10
Afmetingen (B x D x H):	482.6 x 482.6 x 44.4 mm
Beheerplatform:	SNMP
Soorten RAID:	0,1,5,6,10
Overdrachtssnelheid:	1.2 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Interne cache:	512 MB