AGM Adder TS50-384 Handleiding
AGM
Verrekijker
Adder TS50-384
Lees hieronder de 📖 handleiding in het Nederlandse voor AGM Adder TS50-384 (48 pagina's) in de categorie Verrekijker. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/48
ADDER
THERMAL IMAGING RIFLESCOPE
USER MANUAL
© 2021-2022 AGM Global Vision, LLC. All rights reserved.
This documentation is subject to change without notice.
No parts of this manual, in whole or in part, may be copied,
photocopied, translated, or transmitted by any electronic medium
or in machine-readable form without the prior written permission of
AGM Global Vision, LLC.
If you have questions that are not covered in this manual, or need
service, contact AGM Global Vision customer support for additional
information prior to returning a product.
AGM Global Vision, LLC
173 West Main Street
PO Box 962
Springerville, AZ 85938
Tel. 928.333.4300
support@agmglobalvision.com
www.agmglobalvision.com
EXPORT INFORMATION
Buyer acknowledges that all products supplied by AGM Global Vision, LLC are
subject to U.S. export control laws, including, but not limited to, the Export
Administration Regulations, the International Economic Emergency Powers
Act, and various U.S. embargoes and sanctions. AGM Global Vision products
may not be exported, re-exported, or transferred contrary to U.S. export control
laws. In particular, AGM Global Vision products may not be exported, re-
exported, or transferred to prohibited countries, individuals, organizations, or
entities, including but not limited to those individuals and entities listed on the
List of Specially Designated Nationals and Blocked Persons administered or
maintained by the U.S. Office of Foreign Assets Control (“OFAC”), the various
lists maintained by the Bureau of Industry and Security of the Department
of Commerce, and the U.S. State Department and Buyer represents and
warrants that neither Buyer nor any of its officers, directors, or employees are
on such lists. Distribution or resale by Buyer to such countries, individuals,
organizations, or entities is expressly prohibited. Buyer has and will maintain a
positive process to ensure compliance with this Section.
2022.05.05
3ADDER USER MAN U A L
FCC INFORMATION
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment complies with FCC/IC RSS-102
radiation exposure limits set forth for an uncontrolled
environment.
FCC compliance: This product has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This product generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this product does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Product specificaties
| Merk: | AGM |
| Categorie: | Verrekijker |
| Model: | Adder TS50-384 |
Heb je hulp nodig?
Als je hulp nodig hebt met AGM Adder TS50-384 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verrekijker AGM
14 Januari 2025
14 Januari 2025
14 Januari 2025
14 Januari 2025
14 Januari 2025
14 Januari 2025
14 Januari 2025
14 Januari 2025
14 Januari 2025
14 Januari 2025
Handleiding Verrekijker
- Verrekijker Braun
- Verrekijker Nikon
- Verrekijker Canon
- Verrekijker Olympus
- Verrekijker Apeman
- Verrekijker Asaklitt
- Verrekijker ATN
- Verrekijker Auriol
- Verrekijker Bresser
- Verrekijker Bushnell
- Verrekijker Bynolyt
- Verrekijker Dorr
- Verrekijker Focus
- Verrekijker Hama
- Verrekijker Kodak
- Verrekijker Leica
- Verrekijker Maginon
- Verrekijker Meade
- Verrekijker Minox
- Verrekijker National Geographic
- Verrekijker Nedis
- Verrekijker NEWTON
- Verrekijker Pentax
- Verrekijker Praktica
- Verrekijker Pulsar
- Verrekijker Rocktrail
- Verrekijker Rollei
- Verrekijker Sharper Image
- Verrekijker Technaxx
- Verrekijker Tevion
- Verrekijker Traveler
- Verrekijker Trust
- Verrekijker Vanguard
- Verrekijker Vivitar
- Verrekijker Vortex
- Verrekijker Yukon
- Verrekijker Crivit
- Verrekijker Barska
- Verrekijker Kayoba
- Verrekijker Celestron
- Verrekijker Levenhuk
- Verrekijker Cresta
- Verrekijker Armasight
- Verrekijker Leupold
- Verrekijker Steiner
- Verrekijker Swarovski
- Verrekijker Zeiss
- Verrekijker Carson
- Verrekijker Swarovski Optik
- Verrekijker Blaser
- Verrekijker SIG Sauer
- Verrekijker Umarex
- Verrekijker Eagle Optics
- Verrekijker Berger & Schröter
- Verrekijker Snypex
- Verrekijker InfiRay
- Verrekijker Goview
- Verrekijker Eschenbach
- Verrekijker Explore Scientific
- Verrekijker Liemke
- Verrekijker Night Owl
- Verrekijker SVBONY
- Verrekijker IGEN
- Verrekijker Rexing
- Verrekijker Opticron
- Verrekijker Alpen Optics
- Verrekijker Kite Optics
- Verrekijker Meopta
- Verrekijker Hawke
- Verrekijker PARD
- Verrekijker RIX
Nieuwste handleidingen voor Verrekijker
20 December 2024
18 December 2024
18 December 2024
16 December 2024
16 December 2024
10 December 2024
8 December 2024
8 December 2024
7 December 2024
25 November 2024